1 / 13

How to Program with JTAG

How to Program with JTAG. ECE 353 – Computer Systems lab I Mike O’Malley Tom Stack September 20 th 2005. Quartus II – Tools -> Programmer. Click on “Hardware Setup…”. Click “Add Hardware” For the parallel port version select ByteBlasterMV The printer port (LPT1) For the USB version

sol
Download Presentation

How to Program with JTAG

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Program with JTAG ECE 353 – Computer Systems lab I Mike O’Malley Tom Stack September 20th 2005

  2. Quartus II – Tools -> Programmer

  3. Click on “Hardware Setup…”

  4. Click “Add Hardware” For the parallel port version select ByteBlasterMV The printer port (LPT1) For the USB version TBD Click “Ok” Click “Close” Hardware Setup

  5. Schematic for JTAG programming http://www.altera.com/literature/an/an095.pdf http://www.altera.com/literature/ds/m7000.pdf

  6. WARNING! DISCONNECT 4Mhz CLOCK BEFORE ATTACHING TO PROGRAMMER

  7. Click “Auto Detect”

  8. Good!

  9. Quickly Check for burning chip Unplug Power Check connections Is the clock unplugged? Ask the TA for assistance Bad!

  10. Right Click and select “Change File…”

  11. Navigate to your project folder Select the .pof file created from compilation Click “Open” Select your .pof file

  12. Check the Program / Configure box and Verify, Click Start

  13. All Green is good Unplug power Unplug programmer Connect clock Connect Power Red is bad Check connections Ask TA for help Programming Complete

More Related