1 / 8

Test beam 27.07.2012 – 10 .08.2012 H6/SPS CERN – Prevessin

TPC mode, new BNL VMM1 Elx compare to APV25 Trigger scheme (I ) 1 x 1 m 2 chamber. Test beam 27.07.2012 – 10 .08.2012 H6/SPS CERN – Prevessin. Theo, Paolo. TEST BEAM SETUP Oct2011 (14.10.2011-21.10.2011). Jura. 300 run<= 6989 322 7007<run >=6990 16.10..2011, 11: 30. 425. 78.

spiro
Download Presentation

Test beam 27.07.2012 – 10 .08.2012 H6/SPS CERN – Prevessin

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TPC mode, new BNL VMM1 Elx compare to APV25 • Trigger scheme (I) • 1 x 1 m2 chamber Test beam 27.07.2012 – 10.08.2012 H6/SPS CERN – Prevessin Theo, Paolo

  2. TEST BEAM SETUP Oct2011 (14.10.2011-21.10.2011) Jura 300 run<=6989 322 7007<run>=6990 16.10..2011, 11:30 425 78 113 78 TOP VIEW 1406 CR2-r Large mm μM-R20 stripsX μM-R18 stripsY μM-R21 stripsYX veto Sci s360 s360 44 725 2 2 Beam profile wire chamber x 100 10 20 20 20 μM-R19G stripsXUV s640 z 26 26 26 15 finger Sci (SA) y 170 10 2 s1 Si1 Si3 SC Si6 SB (π-,+120GeV/c) Y-inverted SB SD s1 s1 s1 Saleve movable table 16 4730 SIDE VIEW y s1 s1 s640 s1 26 26 26 z x x s640 s640 s1 Si1 Si6 Si3 50 (π-,+120GeV/c) Y-inverted s360 1155 New movable table 16.10.11 19:30 rotate chambers by 20 degrees μM-R18 (X-Y) used only as Y-strip chamber

  3. H6 test beam 27 July –10Aug Setup • Mechanics: Freiburg support frame with provision to rotate the chambers • Reference systems: • 2 or 4 xy chambers (0.250 mm pitch) – equipped with 1x + 1y APV25 (2 or 4 HDMI cables), mounted on both ends of Freiburg frame • Si telescope (BAT), 3 xy stations at 0.5 – 1 m downstream of MM setup • 8x-strip chambers (0.4 mm pitch) to be tested, mounted on frame back-to-back • 1 x 1 m2 MM (single coordinate) • Trigger: scintillators Electronics: VMM1 (new BNL chip) and APV25 • Reference chambers: 8 APV25 (4 HDMI cables) • All 8 chambers can be equipped with APV25 for TPC mode studies (remove time jitter using ref. MMs ?) • All 8 chambers can be equipped with BNL chip for data readout (TPC mode) • All 8 chambers can be equipped with BNL chip for trigger studies (connected to FPGA evaluation board) Measurements • Systematic studies of BNL chip performance compared to APV25 • Measure resolution as function of track angle (for different Edrift), track reconstruction • Measure performance of 1 x 1 m2 MM (strip length ≥ 1 m)

  4. 2012 July Micromegas Test Beam Readout Schematics micromegas (8x) X chambers Tracker (4x) XY chambers Tracker (4x) XY chambers micromegas (8x) X chambers 16x trigger LVDS Tracker (4x) XY chambers micromegas (8x) X chambers micromegas (8x) X chambers tracker (4x) XY chambers micromegas (8x) X chambers micromegas (8x) X chambers 16x micromegas (8x) X chambers micromegas (8x) X chambers APV VMM VMM VMM1 APV AZ Adapter Card 4 x HDMI New “C-Card” ADC-Card (APV) BNL DAQ card Avnet LX9 ADC-Card (APV) FEC switch FEC FPGA Eval Board VMM1 events mmdaq PC SDC APV25 events Trigger data DCS HV/LV, T-H-P External Sci TRG

  5. Services & Electronics • Gas • 93:7 Ar:CO2 • DCS – HV/LV • CAEN Mainframe 2527 2x12 Channel Boards • Supervision PC connected with Ethernet – • PVSS setup • LV – ATX supply for min frame of SRS • DAQ & SDC • mmDAQ + monitoring – • APV25 Readout through SRS – VMM1 Readout • Slow Control for SRS & VMM1

  6. H2 H8 H6 CERN Prevessin Bat 887-EHN1-H6/146 Counting room: HNA 447

  7. Contact Names • Test beam coordination (H6): • Paolo Iengo (Paolo.Iengo@cern.ch, Tel. 168679) • Theo Alexopoulos (Theodoros.Alexopoulos@cern.ch, Tel. 0765439098 ) • Installation: • George Glonti (George.Glonti@cern.ch, Tel. 0764956663) • GiviSekhniaidze (givi.sekhniaidze@cern.ch, Tel. 164453) • DAQ: • MarcinByszewski (marcin.byszewski@cern.ch, Tel. 165537) • DCS: • George Iakovidis (george.iakovidis@cern.ch,Tel. 162858)

More Related