1 / 15

Dimension Guidelines

Dimension Guidelines. 1. Dimensions should NOT be duplicated, nor should the same information be given in two different ways. Incorrect. 1. Dimensions should NOT be duplicated, nor should the same information be given in two different ways. Correct.

sunee
Download Presentation

Dimension Guidelines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dimension Guidelines

  2. 1. Dimensions should NOT be duplicated, nor should the same information be given in two different ways. Incorrect

  3. 1. Dimensions should NOT be duplicated, nor should the same information be given in two different ways. Correct

  4. 2. Dimensions should be attached to the view that best shows the contour of the feature to be dimensioned. Incorrect

  5. 2. Dimensions should be attached to the view that best shows the contour of the feature to be dimensioned. Correct

  6. 3. Whenever possible, avoid dimensioning to hidden lines. Incorrect

  7. 3. Whenever possible, avoid dimensioning to hidden lines.

  8. 4. Avoid dimensioning over or through the object. Incorrect

  9. 4. Avoid dimensioning over or through the object.

  10. 5. Whenever possible, locate dimensions between adjacent views. Incorrect

  11. 5. Whenever possible, locate dimensions between adjacent views. Notice this dimension is not between the views, but this is a better placement than dimensioning to the hidden line in the right side view.

  12. 6. In general, a circle is dimensioned by its diameter and an arc by its radius.

  13. 7. Holes are located by their centerlines, which may be extended and used as extension lines.

  14. 8. Holes should be located and sized in the view that shows the feature as a circle. Incorrect

  15. 8. Holes should be located and sized in the view that shows the feature as a circle. Correct

More Related