Features of the Green Rig Design: Burns 20-25% less diesel fuel than SCR electric rigs in

1. AMC Green Rig The Green Rig offers the latest in rig design for the drilling industry with the environment and operating costs in mind. This rig is designed to move faster and drill quicker while using less diesel and mud in the process with little to no impact on the surrounding environment. • Features of the Green Rig Design: • Burns 20-25% less diesel fuel than SCR electric rigs in • the market today. • Designed with a zero discharge and full recovery system • for all drilling fluids. All hydraulic oil used on the rig is • biodegradable. • Fewer trucking loads than Mechanical and SCR • conventional rigs in the market today. • Smaller rig site is needed for the Green Rig leaving less • of a footprint on the environment. • No cranes required for rig-up. The mast, substructure • and other large components that normally require a • crane are erected via hydraulic cylinders. • Mud system is designed with enclosed round bottom • tanks utilizing the latest in solids control technology for • more efficient mud processing. • Remote monitoring and troubleshooting via internet • browser. System logs events and faults to advise actions • required. Applied Machinery Corporation | www.appmach.com | sales@appmach.com | PH: 281-821-0700 | FX: 281-821-6770

2. AMC Green Rig Controls The Green Rig features AC technology with the newest design in the market today and exhibits the safest features currently offered by any manufacturer. The AC Variable Frequency Drives offer better power management resulting in less power needed to operate the rig. • AC DRAWWORKS: • Drawworks safer operation via Joystick. • Primary braking is done by AC motor • regeneration. • Hydraulic fail-safe spring-set hydraulic • release braking is for parking or emergency • stopping. • Load control achieved without conventional • brakes while maximizing safety. • Lighter and less maintenance than a • conventional drawworks. • Self contained oil cooling system for • transmission and drum shaft bearing assembly. • Provides wide operating speed range, • electronic braking, accurate speed, torque, and • position control. • DRILLER’S CABIN & CONTROLS: • Touch screens for controls, status • monitoring, data acquisition and • operator rig management. • Auto driller with weight on bit, rate of • penetration and rotary torque. • Advanced remote troubleshooting and • diagnostic monitoring. • Mud monitoring with volume and flow • sensors (optional equipment is available). • Automatically set dynamic crown and floor • protection points. • Functions for slip and cut along with disc • brake testing. • Advanced maintenance monitoring. Solids Control Equipment Suction Tank Mud Cleaning Tank Generator Sets Water Tank Mud Pumps Mud/Gas Separator, Trip Tank & Choke Manifold Skid Fuel Tank VFD House HPU Skid Catwalk AC Drawworks Drillers’ Cabin Applied Machinery Corporation | www.appmach.com | sales@appmach.com | PH: 281-821-0700 | FX: 281-821-6770