1 / 13

TrueSTEAM ™ Humidification Systems

TrueSTEAM ™ Humidification Systems. Module 2: TrueSTEAM Sizing and Selection. Module 2: Selecting & Sizing . Understanding Industry Standards & Guidelines for sizing Calculating a home's humidity load requirements Trade-offs of different humidifier types. Key Learning

temple
Download Presentation

TrueSTEAM ™ Humidification Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TrueSTEAM™ Humidification Systems Module 2: TrueSTEAM Sizing and Selection

  2. Module 2: Selecting & Sizing • Understanding Industry Standards & Guidelines for sizing • Calculating a home's humidity load requirements • Trade-offs of different humidifier types Key Learning Selecting the Right Humidifier for Every Job

  3. *Based on a tight home with people living in it. Sizing – Establishing a Baseline • AHRI sets rating guidelines for humidifiers. (610 Guideline F) • Definitions • Capacity rating = Maximum output in 24-hour period • Load requirement = Minimum output required to achieve 35%RH with external variables considered. • Traditionally, ratings advertised based on capacity • A better approachBase humidifier selection on LOAD REQUIREMENT to minimize excessive runtime, operating costs, and dealer callbacks.

  4. Sizing – Refining the message • Assume fixed value 35%RH and hours needed to achieve. • Segmented by area size, average daily run times. • A bypass humidifier is rated at 12 GPD - Why not use this? • 12 GPD based on 120F air passing through it • In a 2000 sq ft space, equals 13 hours of furnace run time • Furnace runtime more $$$ than TrueSTEAM in this example.

  5. Sizing – TrueSTEAM Recommendations • HM506: 500-1800 for <80% daily run (<20 hr) • HM509: 1000-2300 for <80% daily run (<20 hr) • HM512: 1500-3000 for <80% daily run (<20 hr) • Within these home sizes, units should hit ideal humidity without running all day. • Why do some of the numbers overlap? • Variables within home affect these average run rates.

  6. Variables within the home that affect humidity • Insulation • Tight, average or loose? • Ceiling height • Higher ceilings = smaller ft2 coverable (larger total volume) • Indoor temperature • Higher temps require higher RH% to achieve desired comfort • Control settings • Ventilation – What sources of ventilation are there? • Fireplace flues • ERV/HRV/motorized dampers • Open windows • Old homes breathe more

  7. Square footage Insulation – AHRI definition of structure type • 'Tight' = Well insulated with vapor retarders, tight storm doors, windows with weather stripping, dampered fireplace and using 1/2 air changes per hour for ventilation. • 'Average' = Insulated with vapor retarders, loose storm doors and windows, dampered fireplace with 1 air change per hour for ventilation. • 'Loose' = Generally built before 1930 with little or no insulation, no storm doors, no insulated windows, no weather stripping, no vapor retarders, undampered fireplace. Uses 1-1/2 air changes per hour for ventilation. • How does this translate to load requirements?

  8. 1000 ft2 @8-ft ceiling 1250 ft2 @8-ft ceiling 1500 ft2 @8-ft ceiling 3000 ft2 @8-ft ceiling 2000 ft2 @8-ft ceiling 2500 ft2 @8-ft ceiling Ceiling height • AHRI sets load requirements for a fixed 8-ft ceiling height • Higher ceilings, open foyers, split level, stairway air shafts add to total CUBIC feet • Higher height = Lower width/length served (i.e. lower ft2) • If ceiling height >8ft, refer to ft3, not ft2. • Multiplying ft2 by ceiling height equals ft3 • How does this translate to load requirements?

  9. Frost Protection • Auto-humidity controls reduce and increase indoor humidity based on outdoor conditions. • What Honeywell Frost Protect reads… Frost setting limits achievable humidity.

  10. 1000 ft2 @8-ft ceiling 1250 ft2 @8-ft ceiling 1500 ft2 @8-ft ceiling 3000 ft2 @8-ft ceiling 2000 ft2 @8-ft ceiling 2500 ft2 @8-ft ceiling Ventilation • Ventilation sources • Fireplaces • If fireplace present, ensure flue is kept shut when not in use • Forced air ventilators • HRVs and motorized dampers exhaust humidity • Open windows • Drier outside air infiltrates home, exhausts humidified air • Old homes breathe more • Pre-1985 buildings can be assumed to be ‘Average’ or ‘Loose’ insulation, unless retrofitted after. • How does this translate to load requirements?

  11. Recommendations on Humidity with Ventilation • Educate homeowner on proper fireplace upkeep. • Ventilators – Recommend Energy Recovery style which retain moisture in home. • Shut and lock windows. • If average or loose fitting, upsize humidifier, or install multiple units if greater than 12 GPD is required.

  12. Support Materials • Detailed Training Materials on Sizing Available! • Visit www.forwardthinking.honeywell.com • Click on Humidification • Enter literature form:#50-1098: Proper Sizing#50-1066:Selecting a Humidifier

  13. Recap • Understanding Industry Standards & Guidelines for sizing • Calculating a home's humidity load requirements • Trade-offs of different humidifier types Key Learning Selecting the Right Humidifier for Every Job

More Related