AUMA Electric Actuators

1. AUMA Electric Actuators

2. AUMA scope of supply Actuators for valves requiring multi turn actuation: Gate valves Sluice gates Globe valves Pinch valves Actuators for valves requiring quarter turn actuation: Butterfly valves Ball valves Plug valves Actuators for valves requiring linear actuation: Globe valves

3. AUMA provides a complete range of electric actuators • Multi turn output up to 60,000 ft lb torque / 900,000 lb thrust • Quarter turn output up to 498,000 ft lb torque • Linear output up to 48,825 lb thrust

4. AUMA offers three actuator control configurations • Conventional actuator • Limit switches • Torque switches • Without controls – AUMA NORM • Conventional actuator • Limit switches • Torque switches • Conventional controls • AUMA Matic (AM) • Non-intrusive actuator • MWG – encoders sense position & torque • Microprocessor- based controls • AUMATIC (AC)

5. A solution for any environmental / ambient application • Watertight applications • NEMA 4 / 4X • IP67 • Explosionproof applications • FM • CSA • ATEX • Other global approvals • High & low ambient temperature • As high as +250º F (+120º C) • As low as -76º F (-60º C) • Submersible applications • NEMA 6 • IP68

6. Model SA multiturn actuator • Drive - motor (or hand wheel) drives a worm/worm wheel gearset which turns a hollow output drive shaft.

7. Model SAmultiturn actuator • 11 sizes • output torque from 7 to 23,600 ftlbs • thrust acceptance up to 450,000 lbs • speed from 4.8 up to 216 rpm (at 60 Hz, in 12 increments - speed selections reduced for larger actuators) SA25.1 – SA48.1 SA07.2 – SA16.2

8. SA Multiturn Actuator coupled with GK or GHT Multiturn Gearbox • SA actuator / GK gearbox • Up to 11,900 ftlb torque • Up to 309,000 lb thrust • SA actuator / GHT gearbox • Up to 60,000 ftlb torque • Up to 900,000 lb thrust

9. Plug & socket electrical connection • Screw / compression connection (no special tools required) • Field wiring can be performed prior to actuator / valve installation • Once wired, field wiring can be unplugged • Can be utilized as a disconnect or supplied with a disconnect switch • Safe terminals • Optional ring-tongue terminals

10. Easily to set-up / commission • Easily settable position limit switches • Just a few turns of a slotted shaft • No declutch shaft • Easy torque switch adjustment • Test knobs to check limit & torque switches

11. User friendly design offers actuator configuration flexibility SA actuators can be furnished as conventional or non-intrusive actuators

12. SA actuators can be furnished as ‘non-intrusive’ actuators What is a non-intrusive actuator? An actuator whose parameters can be set without gaining access to the inside of the unit. Non-Intrusive

13. Non-intrusive actuators - 3 ways to set parameters Manipulate local controls Wirelessly via laptop Wirelessly via Windows-based PDA

14. LE SA or SA/GK Multiturn actuator - Output Drives for many applications B AF A Also available: D / DD / B3D IB3 AK

15. SG05.1 – 12.1 Quarterturn Actuator • 4 sizes (SG05.1 - SG12.1) • up to 880 ftlbs output torque • capable of ‘open/close’ service and ‘positioning’ or ‘modulating’ service up to 300 starts per hour • variable operating time (single phase) • separate splined coupling • plug & socket electrical connection • double seal available • non-intrusive version available • version available for hazardous locations according to FM, ATEX or CSA standards

16. SG.1 Quarterturn Actuator • Motor drives a three-stage planetary gear set which drives a worm/worm wheel gear set and finally a splined coupling. Hand wheel drives planetary gear housing then worm and coupling.

17. AUMA GS worm gearbox models 12 sizes • GS50.3 – GS250.3 • GS315 – GS500 • GS630.3 Output torque up to 498,000 ftlbs Wide variety of primary spur gear reducers • VZ on GS100.3 – GS125.3 • GZ on GS160.3 – GS630.3 GS 50.3 – 125.3 GS 160.3 – 250.3 GS 315 – 500 GS630.3

18. Model GSworm gear - Applications • Manual operator • Meets AWWA Standard C504-06 for manual butterfly valves (when properly selected) • Electric actuator for quarter turn applications • Electric actuator for guillotine damper applications • Electric actuator for diverter damper applications • Electric actuator for tainter gates

19. SA/GS Quarterturn Actuator • Multiturn actuator (model SA) directly coupled • worm gearbox (model GS) • worm gearbox / primary reducer combination (model GS/GZ) • Up to 498,000 ftlbs output torque for quarter turn applications • Combined features of SA actuator and GSworm gearbox

20. AM integral actuator controls Used as the motor controls with SA, SAR and SG actuators.

21. AM integral actuator controls • Standard features: • reversing starters • plug & socket electrical connection – at field terminals and NORM actuator • power supply / transformer • phase correction • monitor relay • local controls • standard interface (contact closure/discrete inputs) • Options: • optional control system interfaces Positioner – accepts 4-20 mA signal Pulse timer board – extends operating time Digital communications boards • solid state starters

22. AM integral actuator control package • Local controls: • 3 pushbuttons (OPEN – STOP – CLOSE) • 3 indicating lights (OPEN – FAULT – CLOSED) • Selector switch (LOCAL – STOP – REMOTE)

23. AM with fieldbus

24. DeviceNet AM Triple Play with fieldbus Standard features: • Reversing starters for motor control • Plug & socket electrical connection at field terminals and at NORM actuator • power supply / transformer • phase discriminator • local controls Option: • solid state starters

25. AC01.2 integral actuator controls Required for non-intrusive SA, SAR and SG.1 actuators Can also be used as the motor controls for conventional SA, SAR& SG actuators.

26. AC01.2 actuator controls Standard features: • Reversing starters for motor control • Plug & socket electrical connection at field terminals and at NORM actuator • Power supply / transformer for control power • Phase correction • Monitor relay • Programmable output relays (45 parameters available) • standard interface (contact closure / discrete inputs) • Local controls with LCD display • Diagnostics • Operational data logging • Electronic nameplate • Configurable via local controls or Bluetooth Options • Adaptive positioner • Solid state starters • Digital communications / fieldbus / two-wire control

27. AC01.2 - local controls Push-buttons: OPEN-STOP-CLOSE, RESET 5 indicating lights – programmable with 45 parameters available, for example: • End position CLOSED • End position OPEN • Fault • Selector switch in REMOTE • Actuator moving Selector switch: LOCAL-OFF-REMOTE Display on LCD • Valve position indication • Running indication • Setting menu • Status indication • Diagnostic information

28. AC01.2 with fieldbus

29. Commissioning / programming From laptop or PDA via Bluetooth® interface Connects actuator to AUMA PC software ToolSuite– Commissioning & Diagnostic Tool

30. Additional user-friendly features

31. Double-seal at terminal compartment Available on all AUMA actuators Seals terminal compartment from balance of actuator enclosure

32. AM and AC can be rotated on the NORM actuator. Terminal compartment can be rotated on the actuator. Local controls can be rotated on the AM or AC. AM and AC.....flexible mounting An AUMA exclusive feature!

33. Remote Mounting Both the AM and AC can be remote mounted using an available wall bracket.

34. A solution for any valve automation application Spur gearboxes Pedesatal mounted linear thrust units Pedestal mounted/lever output actuators 34

35. AUMA Actuators • Electric actuators for all applications