1 / 8

CRKit R4 Architecture rev 0.2

CRKit R4 Architecture rev 0.2. WINLAB – Rutgers University Date : May 7, 2011. R4 - top level. R4 - app2host. if (IP == 1) then Enable IP processing (append dIP, sIP & UDP) Forward dMAC/sMAC else Disable IP Processing Forward dMAC/sMAC endif. Lookup using PortID.

thetis
Download Presentation

CRKit R4 Architecture rev 0.2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CRKit R4 Architecturerev 0.2 WINLAB – Rutgers University Date : May 7, 2011

  2. R4 - top level

  3. R4 - app2host if (IP == 1) then Enable IP processing (append dIP, sIP & UDP) Forward dMAC/sMAC else Disable IP Processing Forward dMAC/sMAC endif Lookup using PortID dMAC/sMAC from IP Processor VRT Receiver Lookup using PortID if (V == 1) then Enable VITA formatting else Disable VITA formatting endif

  4. R4 - app2host MMU drdy - data ready dreq - data request CMD FORMAT PortID: 0-3 - APP0-3 ports 4-15 – PCORE ports size : data size in bytes ptr : pointer to data in memory To prefetch configuration settings at VITA emitter and IP Processor. Next prefetch can commence during current payload transfer

  5. R4 - host2app CMD FORMAT Ethertype = 0x0800 - IPv4 0x0806 - ARP If (V==1) then VITA context packet Else non-VITA packet use ethertype field for further parsing Endif; • Forward ethernet payload if : • incoming MAC = dMAC • incoming MAC = Broadcast • Append Ethertype field (16-bit) to ethernet payload if (ethertype == IPv4 & Incoming IP == dIP & UDP = 1000) then forward UDP payload to VITA Receiver else forward packet to PCORE

  6. R4 - PCORE PCORE – RMAP RD/WR IP Host -> PCORE (UDP-1001) RTYPE: 0x2000 – RMAP READ 0x2001 – RMAP WRITE RADDR: Register address RDATA: Register data Address Decoding IP PCORE -> Host (UDP-1000)

  7. R4 - APP

  8. R4 – Memory Map Upper 4 MSBs : 0x0-0x1 : PCORE 0x2 : CRKIT Others : Unused 0x0 : CMN 0x1 : ETH 0x2 : PKT 0x3-0xA : APP 0xB : DAC IF 0xC : ADC IF INT SPI, LED DCM/CLOCK CE

More Related