1 / 11

REDOX EQM Nernst Equation &

p.01. C. Y. Yeung (CHW, 2009). reduced form. [product]. 0.0592. log. [reactant]. oxidized form. n. no. of e - involved in rxn. E = E –. 05. REDOX EQM Nernst Equation &. Factors affecting E and E cell. Nernst Equation:.

tieve
Download Presentation

REDOX EQM Nernst Equation &

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. p.01 C. Y. Yeung (CHW, 2009) reduced form [product] 0.0592 log [reactant] oxidized form n no. of e- involved in rxn E = E – 05 REDOX EQM Nernst Equation & Factors affecting E and Ecell Nernst Equation: The math. relationship between cell e.m.f. & [reactant] and [product] in a redox rxn under non-standard conditions. [conc.  1M] reaction quotient (Q)

  2. p.02 EXAMPLE (1): Predict whether the following reaction would proceed spontaneously at 298K: Co(s) + Fe2+(aq)  Co2+(aq) + Fe(s) Given: [Co2+(aq)] = 0.15M and [Fe2+(aq)] = 0.68M E = -0.44 V = -0.28 V E Co2+| Co Fe2+| Fe (anode) (cathode) E = -0.44 – (-0.28) = -0.16 V cell (0.15) 0.0592 Ecell = -0.16 – = -0.141 V log (0.68) 2 Co(s)  Co2+(aq) + 2e- Fe2+(aq) + 2e- Fe(s) Ecell < 0,  the reaction is NOT spontaneous in the direction written.

  3. p.03 EXAMPLE (2): In the following reaction, the e.m.f. of the cell is found to be +0.54V at 250C. Suppose that [Zn2+(aq)] = 1.0M and PH2(g)= 1.0 atm. Calculate the molarity of H+(aq). Zn(s) + 2H+(aq)  Zn2+(aq) + H2(g) = -0.76 V E Zn2+| Zn (anode) (cathode) (1.0)(1.0) 0.0592 E = 0 – (-0.76) = +0.76 V log +0.54 = +0.76 – cell 2 [H+]2 Zn(s)  Zn2+(aq) + 2e- 2H+(aq) + 2e- H2(g)  [H+] = 1.92  10-4 M

  4. p.04 EXAMPLE (3): Consider an electrochemical cell in which zinc electrodes are put into two aq. solutions of ZnSO4(aq) at 0.10M and 1.0M concentrations. Write the cell diagram and calculate the cell e.m.f. = -0.76 V E Zn2+| Zn Given: Cell Diagram: Zn(s) | Zn2+(aq, 0.10M) Zn2+(aq, 1.0M) | Zn(s) 0.10 0.0592 log = 0.0296 V E = 0 – 2 1.0 Concentration Cell: an electrochemical cell from 2 half cells composed of the same material but differing in ion concentrations. Reduction should occur in the more concentrated compartment, therefore: ** When the concentrations in the two compartments are the same, E becomes zero, and no further change occurs. i.e. eqm established.

  5. p.05 EXAMPLE (4): Concentration of K+ ions in the interior and exterior of a nerve cell are 400mM and 15mM respectively. Calculate the membrane potential. 15 0.0592 log E = 0 – 1 400 = 0.0844 V = 84.4 mV Membrane potential: the electrical potential exists across the membrane of biological cells. It is developed when there are unequal concentrations of the same type of ion in the “interior” and “exterior” of a cell. (e.g. nerve cell)

  6. p.06 e- released from electrode 1 (anode)!  [H+] is higher in electrode 2 (cathode)! x2(1) 0.0592 0.211 = 0 – log 2 (1)2(1) x = 2.73  10-4 M pH = 3.56 Exercise A voltaic cell is constructed with two hydrogen electrodes. Electrode 1 has PH2 = 1.00 atm and an unknown [H+]. Electrode 2 is a S.H.E. At 298K, the measured voltage is 0.211 V, and the electrical current is observed to flow from electrode 2 through the external circuit to electrode 1. What is the pH of the solution at electrode 1? Electrode 1 (anode): H2(g, 1atm)  2H+(aq, xM) + 2e- Electrode 2 (cathode): 2H+(aq, 1M ) + 2e- H2(g, 1atm)

  7. p.07 As electrons flow from the anode to the cathode, [reactant] , [product] .  Value of Q  At eqm, no net transfer of e-.  E = 0, then Q = Keq. Given = +0.154 V, = +0.769 V Find the Keq for the following rxn at 298K: E Sn4+|Sn2+ Sn2+ + 2Fe3+ Sn4+ + 2Fe2+ [Sn4+][Fe2+]2 E log  0 = (+0.769 – 0.154) – Fe3+|Fe2+ [Sn2+][Fe3+]2 [product] 0.0592 log [reactant] n Keq log 0.0296 0 = 0.615 – 0.0592 E = E – 2 Keq = 5.98  1020 Understand more about the Nernst Equation: At eqm, E = 0 V

  8. p.08 Calculate the concentration of Sn4+ ion in solution with 1.00M Sn2+ ion in a half-cell which would have a zero potential when connected to a S.H.E. Would Sn2+ ion tend to be oxidized or would Sn4+ tend to be reduced under these conditions? Given: E (1)(1)2 log  0 = (+0.13 – 0) – [Sn4+](1) 0.0592 2 Exercise = +0.13 V Sn4+|Sn2+ Sn4+ + H2 Sn2+ + 2H+ [Sn4+] = 4.06  10-5 M Sn2+ would NOT tend to be oxidized, and Sn4+ would NOT tend to be reduced, because E = 0 V. Eqm is reached.

  9. p.09 Factors affecting the values of E and Ecell Conc. of electrolyte: Temperature Pressure ** eqm position would be shifted in accordance to the Le Chatelier’s Principle. ** For redox rxns having Ecell > 0, i.e. DH < 0 If temp. , eqm position would be shifted BW to absorb excessive heat. (i.e. e.m.f. ) ** affect the eqm position of systems involving gaseous species.

  10. p.10 Summary By using the Nernst Equation: ** we can calculate the values of E or Ecell under non-standard conditions (conc.  1M) at 298K. ** calculate the concentration ratio of R.A. and O.A. with a given E or Ecell at 298K. ** calculate the value of Keq when E = 0 V. (i.e. no net e- transfer occurs and an eqm is reached.) Concentration Cell and Membrane Potential The values of E and Ecell are affected by [electrolyte], temperature and pressure.

  11. p.11 Next …. Primary Cells & Secondary Cells (p. 215-216) Assignment p.214 Check Point 20.6 [due date: 18/5 (Mon)] p.229 Q.3(a), 7, 8(c), 9(a), 16, 20(b), 25 [due date: 13/5 (Wed)]

More Related