1 / 10

EELE 461/561 – Digital System Design

EELE 461/561 – Digital System Design. ADS MoMentum. Momentum.

tpadgett
Download Presentation

EELE 461/561 – Digital System Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EELE 461/561 – Digital System Design ADS MoMentum EE 461 – Digital System Design Spring 2010

  2. Momentum • Objectives1) Create a Microstrip Layout in ADS with a custom substrate stackup2) View the layout using the 3D Preview3) Run a Field Simulation and view the S-parameters4) Run a transient SPICE Simulation using the field-simulation data EE 461 – Digital System Design Spring 2010

  3. Momentum • Part 1: Create a Microstrip transmission line layout- create a new design- enter the MLIN and MSUB components from the T-lines – Microstrip library- enter the desired parameters for the substrate and microstrip EE 461 – Digital System Design Spring 2010

  4. Momentum • Part 1: Create a Microstrip transmission line layout- Using the pull-down menu in the schematic, perform: - Layout – Update/Generate Layout - In the layout, use the pull-down menus to perform: - Momentum - Substrate –Update from Schematic EE 461 – Digital System Design Spring 2010

  5. Momentum • Part 1: Create a Microstrip transmission line layout- Enter two ports to your microstrip structure using the pull-down menus: - Insert – Port (accept defaults) - Rotate and attach to the microstrip as in the following figure: EE 461 – Digital System Design Spring 2010

  6. Momentum • Part 2: View the structure using the 3D Previewer- Using the pull-down menus, perform: - EMDS – 3D EM Preview EE 461 – Digital System Design Spring 2010

  7. Momentum • Part 3: Run a field simulation- Using the pull-down menus, perform: - Momentum – Substrate – Precompute - Set the frequency range to (100 MHz to 10GHz) and click OK- Using the pull-down menus, perform: - Momentum – Simulation – S-parameters - On the right of the screen, enter: - Sweep Type = Log - Start = 100 MHz - Stop = 10 GHz - Points/Decade = 5 - Click “Update” to add to Frequency Plan - Click “Simulate” EE 461 – Digital System Design Spring 2010

  8. Momentum • Part 3: View the S-parameter Results- The S-parameters for all ports will automatically appear when the field simulation completes.- You should change the frequency axis to LOG EE 461 – Digital System Design Spring 2010

  9. Momentum • Part 4: Run a transient simulation using the field-solver data- Back in the schematic, enter a full schematic using your Gaussian 35ps step (the figure below shows an ideal step) EE 461 – Digital System Design Spring 2010

  10. Momentum • Part 4: Run a transient simulation using the field-solver data- Run the transient simulation and observe the performance of the microstrip line - notice the impedance discontinuity on the TDR - notice the frequency dependant loss on the TDT (i.e., the slow tail) EE 461 – Digital System Design Spring 2010

More Related