1 / 54

Single Phase On-Line UPS Demo Using MC9S12E128

Single Phase On-Line UPS Demo Using MC9S12E128. UPS Classification. Based on the topology the UPSes are classified to the three basic categories (IEC 62040-3): Passive Standby (Off-line) Line-interactive Double Conversion (On-Line). Basic UPS Topology - Off-line UPS. Advantages:

tpeek
Download Presentation

Single Phase On-Line UPS Demo Using MC9S12E128

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Single Phase On-Line UPS DemoUsing MC9S12E128

  2. UPS Classification • Based on the topology the UPSes are classified to the three basic categories (IEC 62040-3): • Passive Standby (Off-line) • Line-interactive • Double Conversion (On-Line)

  3. Basic UPS Topology - Off-line UPS Advantages: - Very low cost - High efficiency - Compact size • Disadvantages: • - Limited protection • - Not sinusoidal output • Uses battery during brownouts • Short drop-out during transition on battery MCU: - MC68HC908x

  4. Basic UPS Topology - Line-Interactive UPS Advantages: - Medium cost - High efficiency - Better voltage conditioning Disadvantages: - Still limited protection - Short drop-out during transition on battery • MCU: • MC68HC908x • MC68HC908MRx

  5. Basic UPS Topology- On-Line UPS • Advantages: • Excellent voltage conditioning • Full protection Disadvantages: - High cost - Low efficiency • Possible MCU: • HCS12E128 • DSP56F80x • DSP56F80xx • DSP56F83xx

  6. Single Phase On-Line UPS Demo Using MC9S12E128 Single Phase On-Line UPS Demo Using MC9S12E128

  7. Single Phase On-Line UPS Demo Using MC9S12E128 • Demo Features • Single Phase On-line Topology • 750 VA Output Power • 115/230 V Input Line • Controlled by MC9S12E128 • Single LED User Interface • 4 Status LEDs • 6 LEDs Bar Graph • 2 Buttons • Graphical User Interface on PC • Ready for GUI Display • Demo suitcase

  8. Single Phase On-Line UPS Demo Using MC9S12E128 • Demo Concept • Four PCBs • UPS Power Stage • Input Filter • User Interface • MC9S12E128 Control Board • Demo case

  9. Single Phase On-Line UPS Demo Using MC9S12E128 • Concept Schematic • Input Rectifier • Voltage Doubler • PFC • Average Current Mode PFC • Directly controlled by MCU • Output Inverter • True Sinusoidal Output • Directly controlled by MCU • Battery Charger • FlyBack DC-DC Converter • Controlled by TOP249Y (Power Integration, Inc.) • Max. Output Power: 60W • 3 – State Charging Algorithm (Bulk charge, Absorption, Float) controlled by MCU • DC-DC Step Up Converter • Push - Pull Converter • Directly Controlled by MCU • Max. Output Power: 560W Whole UPS controlled by one MC9S12E128 only

  10. Single Phase On-Line UPS Demo Using MC9S12E128 • MC9S12E128 Features • 16-bit HCS12 CPU, 50 MHz core clock • 128K bytes of Flash EEPROM, 8K bytes of RAM • 3 x SCI, 1 x SPI, 1 x IIC • 3 x 4-channel 16-bit timer modules (TIM) • 6-channel 15-bit Pulse Modulator with Fault protection module (PMF) • 6-channel 8-bit Pulse Width Modulator (PWM) • 16-channel 10-bit analog-to-digital converter (ADC) • 2 x 1-channel 8-bit digital-to-analog converter (DAC) • Up to 16 pins available as Keypad Wake-Up inputs • 2 x additional external asynchronous interrupts • Up to 74 I/O port pins and 18 input only pins for 112 pin package • Up to 42 I/O port pins and 18 input only pins for 80 pin package

  11. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • Battery Charger • Fly-Back Topology Converter • Dedicated circuit used (TOP249) • Output parameters • Output voltage: 29.4 or 27.4 V (set by MCU) • Output current: max. 1.8 A • Current limitation: 0 – 1.8 A (set by MCU) • Charge algorithm • 3 state (bulk charge, absorption, float) • MCU Interface • 2 analog inputs (battery voltage and battery current) • 1 analog output (PWM + filter, current limitation) • 1 digital output (output voltage 29.4 or 27.4 V)

  12. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • Battery Charger Schematic

  13. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • Battery Charging Algorithm • 3 Step Charging: Bulk, Absorption, Float

  14. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • DC/DC Step Up Converter • Converts the battery voltage (24 V) to DC bus voltage (+/- 390V) • Push-Pull Topology • 50 kHz switching frequency • Fully controlled by MCU • Output parameters • Output Voltage: +/- 390 V • Output Current: 0.8 A • MCU interface • 2 analog inputs (+/- DC bus voltage) • 2 PWM outputs (PWM for transistors)

  15. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • DC/DC Step Up Converter Schematic

  16. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • Input Rectifier + Power Factor Correction (PFC) • Voltage doubler rectifier • PFC using bidirectional switch (one transistor only) • Control technique • Average Current Mode Control by MCU • 40 kHz switching frequency • Current control loop 50 ms • Voltage control loop 1 ms • Output parameters • Output power: 750 W • DC Bus voltage: +/- 390 V • MCU Interface • 4x analog input (2x DC bus voltage, 1x input current, 1x input voltage) • 1x PWM output (PFC transistor) • 1x Input Capture (Zero crossing)

  17. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • Input Rectifier + PFC Controller Schematic

  18. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • Output Inverter • Half bridge topology • 20 kHz switching frequency • Control technique • Fully controlled by MCU • PID controller + voltage feed forward + current feedback • 50 ms control loop • Output parameters • Output Voltage: 110 - 240 V • Output current: 3.3 A • MCU Interface • 4 analog input (2x DC bus voltage, 1x output current, 1x output voltage) • 2 PWM outputs (inverter transistors)

  19. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • Output Inverter Schematic

  20. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • MC9S12E128 Control Board • MC9S12E128 16-bit +5V Microcontroller operating at 25MHz • 8.00MHz crystal oscillator for MCU frequency generation • Background Debug Mode (BDM) interface connector • 2x Optically isolated RS-232 interface • Communication Header (SPI, SCI1, IIC) • PWM and Timer Header • Pulse Width Modulation, PWM, or Timer2, TIM2 Timer1, TIM1 • ADC and DAC Header • Analog-to-Digital Converter, ADC • Digital-to-Analog Converter, DAC Expansion Header for 16-bit Multiplexed Wide Bus • On-board power regulation from an external 12V DC supplied power input

  21. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • MC9S12E128 Control Board - continue • Light Emitting Diode (LED) power indicator • One on-board real-time user debugging LEDs • Six on-board PWM monitoring LEDs • Six on-board PMF monitoring LEDs • Four on-board PMF Fault monitoring LEDs • UNI-3 Motor interface • Over-Voltage sensing • Over-Current sensing • Comparators for automatic current profiling • Encoder/Hall-Effect interface • Manual RESET push-button • General purpose and interrupt toggle switch • 2x General purpose and interrupt push-button

  22. Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation • MC9S12E128 Control Board – Block Diagram

  23. Single Phase On-Line UPS Demo Using MC9S12E128- SW Implementation • Software Structure • 5x periodical interrupts (2x 50 ms, 1x 1 ms, 1x 10 ms, 1x 50ms) • 3x event interrupts (PMF faults, LVI, SCI) • Background loop • Written in C language • Some critical algorithms written in assembler (sine wave generation, PID controllers, arithmetic functions)

  24. Single Phase On-Line UPS Demo Using MC9S12E128- SW Implementation • Software Structure - continue

  25. Single Phase On-Line UPS Demo Using MC9S12E128- SW Implementation • Software Structure - continue

  26. Single Phase On-Line UPS Demo Using MC9S12E128- SW Implementation • Battery Charger Execution period: 50 ms

  27. Single Phase On-Line UPS Demo Using MC9S12E128- SW Implementation • DC/DC Step Up Converter Execution period: 1 ms

  28. Single Phase On-Line UPS Demo Using MC9S12E128- SW Implementation • Power Factor Correction Execution period: 1 ms Execution period: 50 ms

  29. Single Phase On-Line UPS Demo Using MC9S12E128- SW Implementation • Output Inverter Execution period: 1 ms Execution period: 50 ms

  30. Single Phase On-Line UPS Demo Using MC9S12E128- SW Implementation • Application State Machine

  31. Single Phase On-Line UPS Demo Using MC9S12E128- Software Measurements • UPS Software Measurements • Code Length • FLASH memory: 10087 bytes • RAM memory: 3014 bytes (include stack 512 bytes) • MCU load: 77.5 % (without PCMaster serial communication) • PMF Reload 15.8 ms (period 50 ms) • ATD Complete 19.4 ms (period 50 ms) • TIM0 ch4 IC 7.8 ms (period 8.3 ms) • TIM0 ch5 OC 69 ms (period 1 ms) • TIM0 ch6 OC 43.4 ms (period 50 ms)

  32. Single Phase On-Line UPS Demo Using MC9S12E128- Software Measurements • UPS Software Measurements - continues PMF Reload ATD Complete TIM0 ch5 OC TIM0 ch6 OC

  33. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Load defined by IEC 62040-1 • Linear load (525 W) • R = 100 W • Non-linear load (750 VA) • R = 160 W • Rs = 2.8 W • C = 780 mF

  34. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Overall efficiency – linear load

  35. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Overall efficiency – non-linear load

  36. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Output frequency - synchronized

  37. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Output frequency – free running

  38. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Output Voltage THD – without load

  39. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Output Voltage THD – with linear load

  40. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Output Voltage THD – with non-linear load

  41. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Output Voltage THD – with non-linear load

  42. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Output Voltage THD – with non-linear load

  43. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Input Power Factor

  44. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Output Power Factor (linear load)

  45. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Load Step 20 % -> 100 %

  46. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Load Step 20 % -> 100 %

  47. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Load Step 100 % -> 20 %

  48. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Measurements • Load Step 100 % -> 20 %

  49. Single Phase On-Line UPS Demo Using MC9S12E128- Performance Summary

  50. Single Phase On-Line UPS Demo Using MC9S12E128- Developments tools • FreeMaster • Real time monitor • Read and write any variable in application • Display the variables in physical quantities • Scope • Recorder • Control page in HTML code

More Related