150 likes | 297 Views
Observations of Beam Filamentation at SLM5F02 in Simulation. July 22 , 2011 C. Tennant. Procedure. PARMELA model of gun Drive laser parameters based on measurements, assumes ideal distribution 350 keV DC photocathode gun Bunch charge of 135 pC , push 300K particles
E N D
Observations of Beam Filamentation at SLM5F02 in Simulation July 22, 2011 C. Tennant
Procedure • PARMELA model of gun • Drive laser parameters based on measurements, assumes ideal distribution • 350 keV DC photocathode gun • Bunch charge of 135 pC, push 300K particles • PARMELA model of merger • Use Excel (no space charge) to set quads for match to linac • Tweak quads to improve match in PARMELA (with space charge) • PARMELA model of the linac(acceleration) • Accelerate 10° before crest • Space charge effects still appreciable in first module, use Excel to set transverse match in the triplets (where space charge is small) • elegant model of the recirculator • include 1D CSR model and implement “csrdrifts” (allows CSR wake to propagate beyond dipole) • Run to middle of second p-bend SLM5F02
Recall: Beam-based Measurements (view in Slideshow mode to view animated GIF)
st,wiggler = 418.7 fs under-compressed
st,wiggler = 343.7 fs under-compressed
st,wiggler = 269.2 fs under-compressed
st,wiggler = 195.5 fs under-compressed
st,wiggler = 126.0 fs under-compressed
st,wiggler = 73.9 fs fully compressed
st,wiggler = 83.0 fs over-compressed
st,wiggler = 142.2 fs over-compressed
st,wiggler = 213.6 fs over-compressed
st,wiggler = 288.3 fs over-compressed
st,wiggler = 364.6 fs over-compressed
Energy and stvs QT2F08/9 Strength over-compressed under-compressed