1 / 8

Fishing Neck Reconfiguration

Fishing Neck Reconfiguration. Fishing Neck Connection. Fishing Neck—Redesign. Currently, end to narrowing is 5” Reconfigured cable will be 11” from splice to IE4M at a minimum Need to lengthen end to narrowing to accommodate (adding >6”)

tuwa
Download Presentation

Fishing Neck Reconfiguration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fishing Neck Reconfiguration

  2. Fishing Neck Connection

  3. Fishing Neck—Redesign • Currently, end to narrowing is 5” • Reconfigured cable will be 11” from splice to IE4M at a minimum • Need to lengthen end to narrowing to accommodate (adding >6”) • How do we lengthen without disrupting fishing neck connection and rest of tether?

  4. Stopper Reconfiguration

  5. Stopper Reconfiguration Problem: • Shoulder of nylon plug is too large and keeps steel tubing from full contact Solution: • Design new plug out of 1/8” thick metal (aluminum or stainless) with nylon inset and remove 1/8” from steel tubing

  6. Nylon Plug Now • Tether threads begin ¼” from pipe tip • Nylon plug shoulder is ½” • In order to seat plug we would need to • narrow shoulder to ¼” or • Cut ½” from tubing

  7. Proposed Modification • Make plug out of 1/8” thick aluminum • Inset nylon guard to protect cable • Cut only 1/8” from tubing

  8. **I believe 1-1/4” diameter nylon guard will fit, but need to confirm**

More Related