120 likes | 327 Views
OSHA Update August 10, 2010 Jack Rector Area Director El Paso Area Office Lubbock District Office. Topics to be covered. Fatalities/Catastrophes/Accidents New crane and derrick standard OSHA news release on 28 July, 2010. Fatality information (FY 2010).
E N D
OSHA UpdateAugust 10, 2010Jack RectorArea DirectorEl Paso Area OfficeLubbock District Office
Topics to be covered • Fatalities/Catastrophes/Accidents • New crane and derrick standard OSHA news release on 28 July, 2010
Fatality information (FY 2010) • Sixteen (16) work related fatality inspections conducted this fiscal year in the El Paso Area Office Jurisdiction • Twelve (12) were related to oil and gas drilling, servicing, or transporting • 75% of fatality inspections from Oil and Gas or related industry
Fatalities/Catastrophes • No fatalities reported this month • No catastrophes reported this month • No accidents reported this month
Crane and Derrick Standard • The final rule for Cranes and Derricks in Construction (29 CFR 1926 Subpart CC .1400-.1442 and Appendices A-C) was filed with the Federal Register at: http://www.ofr.gov/OFRUpload/OFRData/2010-17818_PI.pdf • The regulation text is available at: http://www.osha.gov/cranes-derricks/index.html
Crane and Derrick Standard • The final rule will be formally published in the FR on August 9th with an effective date of November 8, 2010 • Certain provisions have effective dates ranging from 1 to 4 years
Crane and Derrick Standard • This new standard will comprehensively address key hazards related to cranes and derricks on construction worksites, including the four main causes of worker death and injury: electrocution, crushed by parts of the equipment, struck-by the equipment/load, and falls.
Crane and Derrick Standard • Expected to prevent 22 fatalities and 175 non-fatal injuries each year • Requires operators of most types of cranes to be qualified or certified within 4 years • Certification requirements are designed to work in conjunction with state and local laws
Crane and Derrick Standard • Significant requirements include use of synthetic slings in accordance with the manufacturer’s instructions during assembly/disassembly work; assessment of ground conditions; qualification or certification of crane operators; and procedures for working in the vicinity of power lines.
Heat Stress • Some methods of abating heat stress hazards in workplaces include, but are not limited to: • Permitting workers to drink water or cold liquids (e.g., sports drinks) at liberty; • Establishing provisions for a work/rest regimen so that exposure time to high temperatures and/or the work rate is decreased
Heat Stress • Developing a heat stress program which incorporates the following: • A training program informing employees about the effects of heat stress, and how to recognize heat-related illness symptoms and prevent heat-induced illnesses; • A screening program to identify health conditions aggravated by elevated environmental temperatures; • An acclimation program for new employees or employees returning to work from absences of three or more days; • Specific procedures to be followed for heat-related emergency situations; and • Provisions that first aid be administered immediately to employees displaying symptoms of heat-related illness.
OSHA El Paso Area Office/Lubbock District Office EP: 4849 North Mesa, Suite 200 El Paso, Texas 79912 Phone: (915)534-6251 LB: 1205 Texas Ave., Room 806 Lubbock, Texas 79401 Phone: (806)472-7681 www.osha.gov 1-800-321-OSHA