1 / 25

This PowerPoint is a quick guide to configuration of SheepShaver (v 2.3)

This PowerPoint is a quick guide to configuration of SheepShaver (v 2.3) for running Mac OS 8.5 to 9.0.2 on a Mac Intel under OS X, 10.4.9. Any comment ? : click <here>. Jean-Pascal Cogné Université de Paris 7 - Denis Diderot IPG 4 Place Jussieu 75252 Paris Cedex 05 France.

valin
Download Presentation

This PowerPoint is a quick guide to configuration of SheepShaver (v 2.3)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. This PowerPoint is a quick guide to configuration of SheepShaver (v 2.3) for running Mac OS 8.5 to 9.0.2 on a Mac Intel under OS X, 10.4.9 Any comment ? : click <here> Jean-Pascal Cogné Université de Paris 7 - Denis Diderot IPG 4 Place Jussieu 75252 Paris Cedex 05 France This is a helper. In no case the author can be considered liable of bad issues on your computer…

  2. Before starting, you will need:  A Mac ROM, normally present on every Mac OS 8 or 9 install CD.  A generic Mac OS 8 or 9 install CD… Not an install dedicated to a given machine, as often distributed with machines in the past, but a general OS install… OK, let’s go…!

  3. Installing SheepShaver on a Mac Intel Here is the content of SheepShaver folder, after download, and following the instructions of Gwenolé Beauchesne at:http://gwenole.beauchesne.info/en/projects/sheepshaver/help/installation

  4. Installing SheepShaver on a Mac Intel You will need an OS ROM from Mac.. This ROM can be found on any Mac OS 8 or 9 install CD; see also numerous forums on this subject.. See: http://www.gibix.net/dokuwiki/en:projects:sheepshaver for more info…

  5. Installing SheepShaver on a Mac Intel Then… run SheepShaverGUI..

  6. Installing SheepShaver on a Mac Intel Here is the first Tab of SheepShaverGUI: The place where you define volumes and shared folders…

  7. Installing SheepShaver on a Mac Intel Here is the first Tab of SheepShaverGUI: 1. Create a disk image which will contain your Mac

  8. Installing SheepShaver on a Mac Intel Here is the first Tab of SheepShaverGUI: 1. Create a disk image which will contain your Mac Here I have created a 4GB disk in the SheepShaver Directory…

  9. Installing SheepShaver on a Mac Intel Here is the first Tab of SheepShaverGUI: 1. Create a disk image which will contain your Mac Here I have created a 4GB disk in the SheepShaver Directory…

  10. Installing SheepShaver on a Mac Intel Here is the first Tab of SheepShaverGUI: 2. In principle, you should then define here the Unix path to a shared folder on your Mac OSX…

  11. Installing SheepShaver on a Mac Intel Here is the first Tab of SheepShaverGUI: 3. However, personnaly, I found this shared folder did not work properly, and preferred to create a new (512Mb) disk image, using « Disk Utilities » of OSX, place it in SheepShaver folder, and add it in the above list using the Add button.

  12. Installing SheepShaver on a Mac Intel Here is the first Tab of SheepShaverGUI: 4. Finally, select "Boot from CD-ROM", in order to load Mac OS 9 from the install disk at the 1st run of SheepShaver…

  13. Installing SheepShaver on a Mac Intel At this stage, you should have your 2 hard disks in the SheepShaver folder… Generated using Mac OSX Disk Utilities (new disk image) Generated using the Create button of SheepShaveGUI

  14. Installing SheepShaver on a Mac Intel In the second Tab, you setup the size of your Mac window… No comments…

  15. Installing SheepShaver on a Mac Intel Third Tab: define the link to keycodes.sdl file Use the Browse button to define the path of this file which is normally situated in your SheepShaver folder

  16. Installing SheepShaver on a Mac Intel Fourth Tab: defining serial ports… I did not make anything here.. There are numerous forums on this subject, if needed…

  17. Installing SheepShaver on a Mac Intel Fifth Tab: one of the most important settings, memory..!

  18. Installing SheepShaver on a Mac Intel Fifth Tab: one of the most important settings, memory..! 1. Define the size of the memory you wish to use in your Mac.. here set at 512 Mb

  19. Installing SheepShaver on a Mac Intel Fifth Tab: one of the most important settings, memory..! 2. Use the Browse button to specify the path to Mac ROM I have renamed it Mac_OS_ROM, and placed it in the SheepShaver folder

  20. Installing SheepShaver on a Mac Intel And the final Tab… Be sure to check the Enable JIT Compiler checkbox…

  21. Installing SheepShaver on a Mac Intel And that’s all..! Just click on Start button, with the Mac OS install CD in the disk drive… Important Notes:         - Mac Install CD should be loaded in the disk drive before loading SheepShaverGUI (i.e. before the           first step of this tutorial…)         - SheepShaver should start on the CD, and you are ready to install MacOS (8.5 to 9.0.2           recommended) - and finally….

  22. Installing SheepShaver on a Mac Intel You will be fascinated by this wonderful PaleoMac application running under Mac OS 9 on your Mac Intel…!

  23. Installing SheepShaver on a Mac Intel A few tips… (1) I have placed an alias of SheepShaver on OS X desktop, renamed it Mac OS9 HD, and changed its icon… NOTE: this is NOT an alias of the hard disk generated by SheepShaverGUI as explained in previous steps…

  24. Installing SheepShaver under Windows XP Installing SheepShaver on a Mac Intel A few tips… (2) I have also placed an alias of the 2nd disk on OS X desktop… This is my way to exchange data between OS X and OS 9…

  25. Any comment or suggestion? cogne@ipgp.jussieu.fr

More Related