5.59k likes | 9.87k Views
VALVES TYPE & FUNCTION. VALVES. Valves. On-Off Service Throttling (Regulating) Service Prevention of back flow Pressure control (Control Valve). ON – OFF SERVICE. Gate valve. Gate Valve :-. ON – Off Valve ,Used in: 1-Water. 2- Oil. 3- Gas 4- Steam And Other Fluid Services.
E N D
VALVES TYPE & FUNCTION VALVES
Valves • On-Off Service • Throttling (Regulating) Service • Prevention of back flow • Pressure control (Control Valve)
Gate Valve :- • ON – Off Valve ,Used in: • 1-Water. • 2- Oil. • 3- Gas • 4- Steam • And Other Fluid Services.
Plug valve Applications • Gas and liquid fuel • Water. • Extreme temperature flow • Boiler feed water. • Low Pressure Steam . • Corrosive Liquids and Gases
Ball Valve Quarter-Turn • Hydraulic systems . • Water . • Air. • Oil . • Petrochemical . • High volume, high pressure and high temperature flow .
Needle Valve • Fine accurate flow Cont.
Butterfly Valve • Flow Control • Low Speed • Both Side flow
Ball check valve (for heavy fluids) installed horizontal ,vertical & angle
safety valves and relief valves • Safety valves are primarily used with compressible gases and in particular for steam and air services . • Relief valves are commonly used in liquid systems
Pressure Relief Valves • Releases excess pressure to protect system. • Use with Gases & Vapors & liquid. • Open Full at once at set pressure. • Outlet port larger than inlet port. • Never adjust whilst in service.
Type of Pressure Relief Valve • Safety valve :Used with compressible gases .steam and air services . • Relief valve :Used in liquid systems.as pressure overspill devices . • Safety relief valve :used either for liquid or compressible fluid.
Pressure Relieve valve (safety valve) for clean air • Releases excess pressure (clean air)
Safety valve - liquid applications, opens in proportion to the
Typical examples of safety valves used on steam & Air systems
Control system would normally consist of the following components: • Control valves. • Actuators. • Controllers. • Sensors.