1 / 15

Receiver ‘packet-splitting’

Receiver ‘packet-splitting’. A look at how a driver can cause the 82573L NIC to separate a packet’s headers from its data. NIC can do packet-parsing.

veta
Download Presentation

Receiver ‘packet-splitting’

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Receiver ‘packet-splitting’ A look at how a driver can cause the 82573L NIC to separate a packet’s headers from its data

  2. NIC can do packet-parsing • Intel’s newest gigabit Ethernet controllers offer an enhancement to the ‘extended’ Receive Descriptor, called ‘packet-split’ format, which empowers the hardware to recognize the packet ‘headers’ used with the most common network protocols and to automatically separate those headers from their accompanying packet ‘data’

  3. ‘Extended’ RX-Descriptors CPU writes this, NIC reads it: NIC writes this, CPU reads it: Base-address (64-bits) Packet- checksum IP identification MRQ (multiple receive queues) reserved (=0) VLAN tag Packet- length Extended errors Extended status The device-driver initializes the ‘base-address’ field with the physical address of a packet-buffer, and it initializes the ‘reserved’ field with a zero-value… … the network hardware will later modify both fields The network controller will ‘write-back’ the values for these fields when it has transferred a received packet’s data into the packet-buffer

  4. ‘Packet-Split’ RX-Descriptors CPU writes this, NIC reads it: NIC writes this, CPU reads it: Base-address 0 (64-bits) Packet- checksum IP identification MRQ (multiple receive queues) Base-address 1 (64-bits) VLAN tag Packet- Length 0 Extended errors Extended status Base-address 2 (64-bits) Packet Length 3 Packet Length 2 Packet Length 1 S P Header Length Base-address 3 (64-bits) reserved 1 The network controller will ‘write-back’ values to these fields when it has transferred a received packet’s data into those packet-buffers The device-driver initializes four ‘base-address’ fields (‘even-numbered’ addresses)

  5. Same ‘Extended’ Status/Errors 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 0 0 0 A C K 0 0 0 0 U D P V I P I V 0 P I F I P C S T C P C S U D P C S V P I X S M E O P D D 11 10 9 8 7 6 5 4 3 2 1 0 RXE IPE TCPE 0 0 SEQ SE CE 0 0 0 0

  6. Syntax modifications for ‘fetch’ typedef struct { unsigned long long base_addr0; unsigned long long base_addr1; unsigned long long base_addr2; unsigned long long base_addr3; } RX_DESC_FETCH;

  7. Syntax modifications for ‘store’ typedef struct { unsigned int mrq; unsigned short ip_identification; unsigned short packet_chksum; unsigned int desc_status:20; unsigned int desc_errors:12; unsigned short packet_length0; unsigned short vlan_tag; unsigned short header_length; unsigned short packet_length1; unsigned short packet_length2; unsigned short packet_length3 unsigned long long reserved; } RX_DESC_STORE;

  8. Same syntax for the ‘union’ typedef union { RX_DESC_FETCH rxf; RX_DESC_STORE rxs; } RX_DESCRIPTOR;

  9. NIC Registers involved 31 10 0 D T Y P RCTL Device Control register 31 15 0 Reserved (=0) E X T E N RFCTL Receive Filter Control register 31 24 23 16 15 8 7 0 LEN3 (1KB) LEN2 (1KB) LEN1 (1KB) LEN0 (128B) PSRCTL Packet-Split Receive Control register

  10. Each descriptor has four buffers Packet-Split Rx-descriptor base_addr0 base_addr1 base_addr2 base_addr3 buffer3 buffer2 buffer1 buffer0 Four buffers are allocated for receiving one packet

  11. Refresh for ‘reuse’ • As with the ‘extended’ receive-descriptors, it is necessary for a device-driver to setup each ‘packet-split’ receive-descriptor any time it is going to be ‘reused’, since prior buffer-addresses get overwritten during a packet-reception by the network controller • So driver needs a formula for recalculating buffer-addresses, or use a ‘shadow’ array

  12. Kernel-memory layout Sixteen Rx-descriptors (32-bytes each) Sixty-four receive-buffers (1024-bytes each) 512 bytes 65536 bytes KMEM_SIZE (= 66048 bytes) kmem

  13. Caveats • Short packets are not always ‘split’ • Unrecognized packet-headers may not be separated from accompanying packet-data • Demonstrating the packet-split capability will require us to devise a way to transmit packets which have the TCP/UDP and IP packet-headers that the NIC recognizes

  14. Our ‘pktsplit.c’ demo • We created a ‘minimal’ kernel-module for demonstrating the NIC’s ‘packet-splitting’ capabilities TIMEOUT for an in-class demonstration

  15. In-class exercise • Can you enhance our ‘pktsplit.c’ module so that its Receive-Descriptor Queue will function automatically as a ring-buffer (as happens in our ‘extended.c’ example)? • Your best option for this is to install an ISR which will reinitialize some Rx-Descriptors (and advance the RDT index) each time an RXDMT0 interrupt gets triggered

More Related