The re-positioned ground pad is in the right place.

1. The re-positioned ground pad is in the right place. But: Multiple ground tracers (see slide 2)

2. Multiple Ground tracers

3. Multiple ground tracers caused by different heights of anchor pads Different levels for tracers because of different heights of the anchor pads

5. Anchor and tracer beam are not joined As the anchor is displaced downward, the beam does not follow This beam is not tracer. I am not sure of why it is required though This beam is tracer – and this follows anchor

6. Anchor edge and p0 edge don’t exactly line up I increased the size (width , along x-axis) of p0 such that it goes beyond anchor

7. I am not able to fix this. This has to do with changing l, L1, L2 of line 64 of latest netlist. But I am not sure of how these parameters are computed Anchor Displaces out of P0 box

8. In the absence of the tracers Different end points, not constrained to join the anchor.

9. When the number of fingers is used as a parameter, it no longer spaces the comb drives out correctly in x. When the starting number of fingers is less than 10, the layout converter hangs, and no gds file is created. This should be fixed if the files that I sent are updated