550 likes | 558 Views
Learn about Australia Post's requirements for Print.Post preparation, including size, weight, addressing conditions, and more.
E N D
Print Post Preparation Business Letter Services
Introduction • Print Post is an Australia Post service for the delivery of approved periodical publications to addresses within Australia. • In this module This presentation introduces you to Australia Post’s requirements for Print Post preparation. • Learning outcomes • At the end of this presentation you will be able to: • specify Print Post article size and weight categories, and type • identify the inscriptions on Print Post articles • identify the correct addressing conditions for Print Post articles
Print Post at a glance • What is Print Post? • Print Post is an Australia Post service for the delivery of approved periodical publications to addresses within Australia. • Print Post is used by small associations for the delivery of newsletters and special interest publications, through to organisations that distribute large circulation magazines, newspapers and catalogues. Customers use the Print Post service because it is an economical choice for sending their approved publication to their target market. • With Print Post, you can: • • lodge bulk mailings of 100 or more articles1 • • maximise the space available for creative artwork • • choose to include special offers with their publications • • have undeliverable articles returned • • access lower prices for their articles. In addition, the Print Post service also: • has access to private box addresses • has access to the Redirection service • allows a postage meter to be used as a payment method • provides a national delivery service • has delivery with daily normal mail by the same professional delivery officers. 1 The minimum volume is 50 articles when lodging at the Office of Delivery. In all other circumstances 100 articles are required.
Print Post at a glance • What is Print Post? • Applying for Print Post • You need to apply to use the service before preparing and lodging your articles, using a Print Post Application form (8835284), which may be obtained and lodged at most post offices, business centres and mail centres. Alternatively it can be downloaded from the Australia Post website at www.auspost.com.au/printpost • Either the publisher or distributor may apply and be responsible for meeting the terms and conditions applicable to the use of the service. • Submit the form along with a sample of the publication for approval. If an issue of the publication already exists, a copy of the latest issue is to be submitted with the application. Otherwise, a proof or copy of the first issue is to be forwarded to the approving office as soon as it is available. • Forward your completed application to the Print Post Coordinator as detailed in the front cover of the Print Post service guide. Upon approval of your completed application form, Australia Post will issue a Print Post publication number.
Print Post at a glance • What is Print Post? • Applying for Print Post • Once granted, approval is on-going and does not need periodical renewal, however if a Print Post number is unused for a 12 month period it may be cancelled by Australia Post. • A further application is required if the information provided in the first application changes, for example if the publication is transferred to a new publisher. • Note: A single Print Post number will be assigned to any national publication published by one publisher. This is regardless of whether the publication is lodged at multiple lodgement points or under multiple accounts.
Print Post at a glance • More information • More detailed information is available in the Print Post FactSheet and Print Post service guide. • Prices for Print Post can be found in the Print Post service guidethe Post Charges Guide (MS11) and the Australia Post website (auspost.com.au). • These guides are also available at any Australia Post outlet.
Print Post preparation • Preparation overview • To qualify for Print Post prices, customers need to meet the following Australia Post’s bulk mail preparation requirements. Each requirement is covered in more detail on the following pages.
Print Post preparation • Size, weight and type requirements Introduction • To ensure Print Post articles can be delivered correctly, you need to follow Australia Post’s bulk mail requirements for Print Post regarding the content, size, weight and article type. • The requirements for Print Post articles include: • content • size and weight category • type • These requirements are explained in more detail on the following pages.
Print Post preparation • Size, weight and type requirements Content • All articles in a lodgement must be identical, and all supplements, inserts, onserts and flysheet content must be identical and non-personalised (other than the address block details that appear once only for purpose of delivery) with these exceptions: • Subscription Communications • Geographic variation of articles • Personalisation of articles • Supplements • Contact your Account Manager or the Print Post Coordinator as detailed in the front cover of this guide, if you have any concerns or require clarification when preparing to “personalise” an approved publication. Supplements Supplements may be included with copies of an issue, including samples of goods, as long as the following conditions apply: • Supplements must be capable of standing alone and being completely understood and appreciated by the intended recipient, whether or not they contain addressee details • Supplements must be wholly impersonal and must not contain communication targeted to the addressee based on criteria which is specific to that particular person • Supplements must be expressed in general language and in an impersonal tone that: - does not link its content in any way to the particular situation of the addressee, • does not contain a communication to the addressee as a particular person, and • does not contain a signature, or individual signatory details. Subscription communications Approved publications may contain a communication from the sender to the addressee: • requiring or acknowledging payment for the publication being carried by the service • inviting notification of any change to addressee details, or • inviting subscription or re-subscription to the publication being carried by the service. Personalisation of articles If you choose to do so, you may personalise Print Post publications. “Personalisation” under the conditions of Print Post will allow publishers to print addressee details within the publication as many times as they wish. The personalisation must be an integral part of the approved publication, and may be printed on the covers, or inside the publication. The permitted data that may be reprinted throughout the publication is: • title, name, position, organisation of the addressee • elements of the address (delivery detail information) including locality, state abbreviation or postcode Geographic variation of articles Copies to be delivered to different states or regions may have different advertising content.
Print Post preparation • Size and weight type requirements • Size • The size categories eligible for Print Post are: Smalland Large. All articles within a lodgement must be within the same size and weight category. • Print Post Small articles can weigh up to 250gms. Print Post Large articles can weigh up to 1kg † Oblong: deviating from a square by being elongated in one direction. The length must be at least 1.2 times the width. The dimensions of articles are determined by measuring the height, length and width of the article. Excess plastic wrapping is not included when measuring plastic wrapped Print Post articles.
Print Post preparation • Size, weight and type requirements • Type • Print Post articles can either be enclosed in an envelope or plastic wrap. • Alternate packaging and unenclosed or unwrapped articles require specific permission from Australia Post prior to lodgement. • Australia Post offers lower postage rates to customers who prepare and lodge articles in accordance with bulk mail terms and conditions, ensuring articles can be processed in the most efficient manner.
Print Post preparation • Size, weight and type requirements • Window faced envelopes • One of the main requirements of panel envelopes is that they have good clear panels. • However, even very clear panels can cause sorting difficulties if they reflect light to any great extent. Please refer to Section 9 of the Post Guide – Letter Post & Electronic Mail within Australia if required. • If the articles are barcoded, the address area visible through the window panel must meet reflectance requirements. (Refer to the Advanced Module: Barcoding) • Open window panels are not permitted. • The recommended minimum size for window panels is: • • 30mm high x 80mm wide, for Small size articles • • 45mm high x 95mm wide, for Large size articles. • The entire address block (including barcode if present), must be clearly visible through the window panel, when the article is presented for lodgement.
Print Post preparation • Size, weight and type requirements • Paper stock • Paper stock is an important consideration as it can affect the ability of high speed letter sorting equipment to process articles without damage. • Australia Post recommends that envelopes and cards comply with Australian Standards for the production of envelopes, Spec 4611 – 1999 (available at:http://infostore.saiglobal.com/store/). For details refer to your paper supplier or envelope manufacturer or visit www.auspost.com.au/bulkmail • Paper stock colour • Australia Post recommends white paper or card for your articles, but light tints or half-tones are satisfactory. A general test is that the colours should come on or around the range of 78 acceptable colour tones selected from the Pantone Matching System. • Because of the existence of subjective factors such as the varying degrees of colour perception and the varying conditions under which colours are viewed, cases may arise where doubt exists on acceptability of a particular colour. Australia Post can arrange a test, based on the above zone of acceptable colours.
Print Post preparation • Size, weight and type requirements • Sealing of articles • Australia Post recommends each article be secured in a manner which would prevent entrapment of other postal articles. Any opening should not exceed 88mm. • Each article must be secured by a fastening that is not likely to damage other postal articles nor injure persons handling it. Where fasteners are used, they must be appropriate to the thickness of the article, and the ends closed together. Staples and any metal fasteners are discouraged, as they are likely to cause injury to staff handling the articles. • Supplements may be included if fastened to the spine of the publication. • Approval to lodge unenclosed or unwrapped copies of an article may be obtained, prior to lodgement, from the officer-in-charge of the office of lodgement. A sample article must be submitted. • Article flexibility • Small size category articles must be reasonably flexible to ensure that they can be processed through high speed letter sorting equipment. • Small size articles that are too rigid or stiff are ineligible for the service. Some examples of prohibited enclosures includes pencils, pens and items enclosed in a hard case.
Print Post preparation • Size, weight and type requirements Plastic wrapping • Plastic wrapping of articles can provide an alternative to envelopes. If desired, artwork and delivery address details can be printed on a sheet of paper called a flysheet, which is visible through the plastic wrapping. It is preferred that flysheets duplicate the size of the publication being mailed – ie: an A4 publication should be accompanied by an A4 flysheet. • Plastic wrapping is available for both Small and Large size category articles. • Where the address or address label is shown under a transparent wrapping, the area of the wrapper overlapping the address should have a contrast ratio that does not exceed 25% when measured by a suitable photometric method. • Even very clear plastic wrappers or window panels can cause sorting difficulties if they reflect light to any great extent. • The dimensions of Print Post articles are determined by measuring the height, length and width of the article. Excess plastic is not included when measuring plastic wrapped articles. • Articles will be charged at the category within which the largest dimension (width, length, thickness and weight) falls. A Photometric method is one that uses Photometry (optics), the science of measurement of visible light in terms of its perceived brightness to human vision. The contrast ratio is the measurement of the difference in light intensity between the brightest white and the darkest black. A high contrast ratio represents a better colour representation (the better the information will appear against a darker background).
Print Post preparation • Size, weight and type requirements • Plastic wrapping layout • Print Post plastic wrapped articles are comprised of three areas that need to be taken into consideration: • The sealing seam (weld) is not to intersect the address block (or barcode if present) • It is desirable for the hem (overlapping plastic area) not to cover the address block (or barcode if present) • The maximum “overhang” or excess plastic wrap is not to exceed: • 35mm for articles up to 10mm thick, or • 60mm for articles over 10mm thick.
Print Post preparation • Plastic wrapping layout • Common problems with plastic wrapping • The following problems are encountered by Australia Post when plastic wrapping requirements are not strictly followed:
Print Post preparation • Size, weight and type requirements • Plastic wrapping • The following specifications apply to plastic wrapped Print Post articles. Compliance with Seam and Excess Plastic is required for Residue articles and articles sorted to CBD Sort Divisions to avoid a surcharge of 5¢ per article.
Print Post preparation • Publication inscriptions • Each copy of an issue needs to have the title of the publication printed on the front or back cover. • Each copy of an issue needs to have the date of issue and / or information indicating how the issue is placed in the series of issue making up the periodical publication. This information is to be printed in or on the copy – i.e. Vol. 1 Issue 2. The date of the issue may be in the format DD/MM/YY or Season YY. e.g. 30/09/07; or Spring 01. • Example: Priority – Issue 28 • It is preferred that the Print Post publication number be printed within the border of the Print Post imprint – see section 2.5.4. If not, then it must be printed after or below the words “Print Post Approved” on the face of the envelope or wrapper or flysheet, or on the spine, front or back cover of the publication, providing that it is clearly visible when presented for lodgement enclosed in its envelope or wrapper.
Print Post preparation • Barcodes and correct addressing requirements • Introduction • Print Post items do not need to be barcoded. The benefit for customers is that correctly barcoded articles are not subject to the following Correct Addressing conditions. • Australia Post has addressing requirements for Print Post articles in Residue and CBD Sort Divisions. including: • inscriptions • correct addressing • article layout • Customers can choose to use barcodes for Residue and CBD Sort Divisions. If they choose not to, correct addressing conditions apply and a surcharge may be charged if the conditions are not met. • More information about sorting and lodgement is provided in the Print Post Lodgement module.
Print Post preparation • Barcodes and correct addressing requirements • Article layout and zones • Print Post articles are made up of three printing zones. • The following pages detail the dimensions of these zones, and specify the inscriptions to print within them.
Print Post preparation • Barcodes and correct addressing requirements • Postage zone • The postage zone contains a postage paid imprint or a postage meter impression, and the Print Post imprint. • Dimensions must be: • • 90mm across from the top right hand corner of the article • • 40mm down from the top edge of the article.
Print Post preparation • Barcodes and correct addressing requirements Postage zone inscriptions Postage Paid Imprint All articles that are not metered should bear a Postage Paid imprint. The words POSTAGE PAID AUSTRALIA need to be printed in a rectangular box within the following dimensions: • maximum: 26 x 40mm (see illustration) • minimum: 19 x 25mm. Personalised Postage Paid Imprint Australia Post may approve a personalised imprint design. The design must not have the appearance of a postage stamp and the words POSTAGE PAID AUSTRALIA must be prominent (see example illustration). For approval please refer to the contact details on the inside of the front cover of the Print Post service guide.
Print Post preparation • Barcodes and correct addressing requirements • Postage zone inscriptions Print Post imprint, including publication number All articles must bear a Print Post imprint, located within the postage zone, to the left of the Postage Paid imprint or postage meter impression. The words PRINT POST should be printed in capital letters, centred in a rectangular box with the minimum dimensions of 35 x 30mm (see illustration). Font size should be a minimum of 18 points (4.6mm high), for Small articles. For Large articles, the recommended minimum font size is 24 points (6.1mm high). The Print Post publication number for your publication should be clearly printed in the lower part of the box. Alternatively, it must be printed after or below the words “Print Post Approved” on the face of the envelope or wrapper or flysheet, or on the spine, front or back cover of the publication, providing that it is clearly visible when presented for lodgement enclosed in its envelope or wrapper.
Print Post preparation • Barcodes and correct addressing requirements • Postage zone inscriptions Postage Meter Impression A postage meter may be used as a payment method for the Print Post service. The published price must be printed in the postage zone of each article. If a date is included in the meter impression it must be the date of lodgement. Return address details appearing in the postage zone as part of a postage meter impression are acceptable. For additional information on metering, refer to the Postage Meters and Franking Machines Conditions of use booklet (8833675). Colour of postage zone inscriptions Any coloured ink can be used. Australia Post prefers dark colours such as black, dark blue and dark green.
Print Post preparation • Barcodes and correct addressing requirements Return address zone An Australian return address, including the company name of the publisher is required to be shown on each article within a lodgement. Either a street address or a post office box address is acceptable. Australia Post prefers return addresses to be: • on the upper left-hand corner of the address side of the article • no lower than 40mm from the top edge • no larger than 8 point font preferred • with no bolding.
Print Post preparation • Barcodes and correct addressing requirements Return address zone inscriptions The name of the organisation or company responsible for accepting returns and the associated charges must also be included in the return address block. Return address details appearing in the postage zone as part of a postage meter impression are acceptable. The return address should be prefixed with “If undeliverable, return to:” Australia Post prefers the title of the publication to be shown below the return address.
Print Post preparation • Barcodes and correct addressing requirements Barcode and delivery address zone Contains the address (and barcode if present) to which the article is to be delivered. There is a surcharge of 5¢ for articles that do not have a barcode and are not correctly addressed when sorted to Residue and CBD Sort Divisions. Small articles The complete delivery address (and barcode if present) must be positioned in the barcode and delivery address zone of the article: at least 40mm from the top edge of the article at least 15mm from the bottom edge of the article at least 10mm from the left and right edges of the article parallel with the long edge of the article.
Print Post preparation Barcodes and correct addressing requirements • Barcode and delivery address zone • Large article zone (landscape layout) • Australia Post prefers that the complete delivery address (and barcode if present) are • positioned in the barcode and delivery address zone of the article: • at least 40mm from the top edge of the article • at least 15mm from the bottom edge of the article • at least 15mm from the left edge of the article • at least 60mm from the right edge of the article.
Print Post preparation Barcodes and correct addressing requirements • Barcode and delivery address zone • Large article zone (portrait layout) • Australia Post prefers that the complete delivery address (and barcode if present) are positioned in the barcode and delivery address zone of the article: • at least 60mm from the top edge of the article • at least 15mm from the bottom edge of the article • at least 15mm from the left and right edges of the article.
Print Post preparation • Barcode and correct addressing requirements • Barcodes and delivery address zone • Address layout: • Correct addressing conditions ensure the Australia Post delivery system can recognise and interpret the delivery address. Bottom Line – must contain, in the following order, the locality, the state or territory abbreviation and finally the postcode. This line is to be printed in CAPITALS with no punctuation, and no underlining. Leave 1 or 2 spaces only between place name, state or territory abbreviation and the postcode. Any application for variations or additions to this format should be submitted and approved prior to lodgement. 1 2 Additional address information such as a business or person’s name, must be placed above thelast two lines of the address and not below, alongside or within these lines. Second Last Line – must contain the number and name of the street or thoroughfare or PO Box or bag number. Barcode (optional) 3 The address lines (excluding barcode placement) must be left justified. 4 5
Print Post preparation • Barcode and correct addressing requirements • Barcodes and delivery address zone • Address layout: • Address labels may be used but must be straight and firmly affixed. • The maximum skew permissible for an address line, sheet or label is ±10 degrees from the bottom edge of the article. • If using window panel envelopes, the entire address block (including barcode if present) must be clearly visible through the window panel when the article is presented for lodgement.
Print Post preparation In proportional fonts, different characters have different widths. Cursive, fancy style fonts such as Brush Script and Marigold. In fixed-pitch fonts, every character has the same width. Barcodes and correct addressing requirements • Barcodes and delivery address zone • Address fonts and colours: • In addition to delivery address layout, articles need to comply with the following address font requirements: • • Fixed pitch fonts are recommended (such as Courier or OCRB, 12 point, 10 pitch). • • If proportional fonts are used, it is preferred they be structured in 12 point, ideally Helvetica or Times 12 point. Print characters must not touch or overlap. • • Artistic or script fonts must not be used. • • Print characters are acceptable between 1.8mm and 7.0mm high, and between 0.3mm and 7.0mm wide. The ideal height is between 2.0mm and 4.0mm (upper case characters of nominal 10 point and 12 point type generally fall within this range). Line spacing should be between 1.0mm and 2.5mm. • • Attributes such as italics, bolding, shadowing, or underlining are not permitted. • • Dark colours such as black, dark blue and dark green are preferred. Red, orange and yellow inks must not be used.
Print Post preparation Barcodes and correct addressing requirements • Barcodes and delivery address zone • Barcoding • Print Post articles do not need to be barcoded, however you are encouraged to apply barcodes to your articles. A barcode is a machine readable representation of information, usually printed as parallel lines, and improves the speed and accuracy of processing mail. • The benefit for you is that correctly barcoded articles are not subject to the Correct Addressing conditions detailed previously. There is a surcharge of 5¢ for articles that do not have a barcode and are not correctly addressed when sorted to Residue and CBD Sort Divisions. • For technical details relating to barcoding, including Australia Post’s Postal Address File (PAF) and specifications on printing a barcode, see the Advanced module: Barcoding. • The barcode used by Australia Post is called a 4-state barcode and includes a Delivery Point Identifier (DPID) which is uniquely applied to Australian addresses.
Print Post requirements Barcodes and correct addressing requirements • Barcodes and delivery address zone • Obtaining the DPID for each address • Australia Post maintains a comprehensive database of addresses called the Postal Address File (PAF), in which each address has a unique Delivery Point Identifier (DPID). • The DPID is an 8-digit number developed by Australia Post that enables each delivery point in Australia to be uniquely identified. • You must use Address Matching Approval System (AMAS) certified software to obtain the correct DPID for each address. • This DPID is then converted into a 4-state barcode and printed onto the article. It is read by Australia Post’s mail processing machines.
Print Post requirements Barcodes and correct addressing requirements • Barcodes and delivery address zone • Barcode location • The barcode can be placed separately from the delivery address, within the Barcode and Delivery Address Zone.
Print Post requirements Barcodes and correct addressing requirements • Barcodes and delivery address zone • Barcode location • Barcodes require a clear zone that must be kept blank (free of printing or other distractions) immediately above, below, and to the left and right of the barcode. This is to ensure that the barcode can be detected by the reader and processed correctly. • There must be a clear zone (no printing) around the barcode of at least 6mm to the left and right and at least 2mm from the top and bottom. • Non-address information, such as your reference codes, sort plan number, etc, may be located above the bottom two lines of the address block provided the barcode clear zone is observed. • There is no requirement for this information to be left aligned.
Print Post preparation • Barcodes and correct addressing requirements • Barcodes and delivery address zone • Customer appended information in barcodes • The standard barcode contains 37 bars, however you have the opportunity to include your own information in 52 or 67 length 4-state barcodes. This information can be used to monitor mail returns for campaigns or orders. The information is encoded and included in the additional bars. See Advanced: Barcoding module. • .
Print Post requirements Barcodes and correct addressing requirements • Adding logos, advertising and other printing • Logos, advertising and other printing may be located anywhere on the article. However a clear zone of at least 10mm must be observed to the left, right and bottom of the last line of the address.
Print Post preparation • Other considerations Dangerous goods declaration IMPORTANT: When articles exceed 500 grams and Air Carriage has been paid, the envelope or wrapper must carry the following endorsement : “A No Dangerous Goods Declaration Has Been Completed” as required by Civil Aviation Legislation. The declaration itself is included in the Print Post Mailing Statement.
Print Post requirements • Barcodes and correct addressing requirements • Other considerations • Non-compliance • Acceptance staff at the lodgement facility will perform an inspection to determine if a lodgement containing articles for Residue or CBD Sort Divisions satisfies the Correct Addressing and plastic wrapping conditions. • If the percentage of non-compliance with the conditions exceeds 10% of the lodgement, as determined by sampling, you have the option of: • (a) withdrawing the lodgement, modifying and re-presenting it at a later date, or • (b) lodging the articles subject to a 5¢ surcharge applying to all articles for Residue and CBD Sort Divisions.
Print Post preparation • Other considerations • How can I ensure an article is acceptable? • If you are concerned that your articles may not satisfy all service requirements you can request a preliminary test prior to lodgement. Tests can be conducted on the following: • • shape • packaging materials and design • window panel quality • article colour, patterns or watermarks • paper stock quality • plastic wrapping • flexibility • correct addressing compliance • barcode readability • positioning of logos, advertising and other printing. • Testing involves processing a sample of articles to determine if they are suitable for machine processing. Articles that pass the test will be accepted • Requests for testing should be directed to either your Australia Post Account Manager, or to: • Australia Post Business Letter Services GPO BOX 1777 MELBOURNE VIC 3001
Print Post basics • Print Post requirements • Cost • Prices for Print Post are available in the Print Post service guide, the Post Charges Guide (MS11) and the Australia Post website (auspost.com.au). Print Post items are charged according to four sort levels, depending on the customer’s processing capabilities. • A surcharge (of 5¢ per article in addition to the published prices) applies to Residue Articles, and articles to CBD Sort Divisions, which do not meet the Correct Addressing conditions. • Australia Post provides a variety of payment options. For details, please discuss with your lodgement point or Account Manager, or call 13 11 18, or the contacts detailed on the inside front cover of this booklet. • Articles attract Same State prices when lodged within the same state as the delivery address (as defined in the Print Post Sort Plan). For charging purposes, the ACT is considered to be part of NSW, and South Australia does not include Northern Territory. • Note: If you want to pay using an Australia Post charge account you will need to lodge your Print Post items at the office at which you hold the account. Otherwise you will need to arrange with your account manager or Australia Post credit management for your account to be made available at the selected lodgement office. • Returned mail / undeliverable articles: Each undeliverable article is returned to the nominated return address on the article by ordinary post. The cost of return postage is assessed at the ordinary post price.
Print Post preparation • Summary • The key points covered were: • Size, weight and type requirements for Print Post articles include: • Print Post articles can be Small or large • Print Post Large articles can weigh up to 1kg • Print Post articles can be enveloped or plastic wrapped • Inscriptions for Print Post articles are: • Title and Issue • Print Post imprint and number • Postage meter impression or Postage Paid imprint • Australian return address • Delivery address • Dangerous Goods declaration • Correct addressing conditions for articles lodged as residue or CBD Sort are: • Delivery address formatting • Delivery address fonts
Assessment You now need to complete a short assessment to check your understanding of the information covered in this module. This assessment consists of 10 multiple-choice questions and should take you approximately 10 minutes to complete. To pass the assessment, you need to answer at least eight of these questions correctly. Attempt this assessment as many times as you need to. If you do not pass, it is recommended that you review this module again.
Assessment True or false? As well as postage paid imprint, a return address and a delivery address, a Print Post imprint and Print Post Publication Number are mandatory inscriptions on an Print Post article. • True • False 1 Correct answer = A All these items are mandatory inscriptions on Print Post articles.
Assessment True or false? Mandatory correct addressing conditions apply to all articles in an Print Post lodgement. • a. True • b. False. Mandatory correct addressing only applies to print Post items lodged as Residue or CBD Sort that are not barcoded 2 Correct answer = B While correct addressing is important for efficient delivery of all Print Post articles, mandatory correct addressing applies to Print Post items lodged as Residue or CBD Sort Division.
Assessment True or false? The minimum lodgement quantity for Print Post Residue is 50. • True • False 3 Correct answer = B The minimum lodgement of 50 is correct when lodged at the Office of Delivery. For all other types of lodgement, a minimum of 100 applies.
Assessment • a. Whenever the publisher chooses • b. Print Post articles cannot be lodged unenclosed – they must be in an envelope • c. When approval has been obtained from the officer in charge of the lodgement point 4 When can unenclosed or unwrapped Print Post articles be lodged? Correct answer = C Uenclosed or unwrapped Print Post articles can be lodged when approval has been obtained from the officer in charge of the lodgement point.
Assessment True or false? The Plastic wrap overhang is included when measuring the size of Print Post articles. • True • False 5 Correct answer = B The dimensions of Print Post articles are determined by measuring the height, length and width of the article. Excess plastic is not included when measuring plastic wrapped articles.