1 / 4

How to Use Metal Crusher Correctly

Use metal crusher rationally can prolong the service life of the machine and ensure a safe working environment. Here are a few tips about how to use our metal crushers correctly for your reference.

whirlstonalma
Download Presentation

How to Use Metal Crusher Correctly

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Website: http://www.metalrecyclingmachines.com Email: info@metalrecyclingmachines.com How to Use Metal Crusher Correctly Key words: Metal crusher,metal crusher for sale,metal crushing machine,metal crusher machine,scrap metal crusher,metal recycling,scrap metal equipment for sale,industrial can crusher,buy can crusher 1. Metal crusher should be fixed on cement base. If workplace is frequently changed, crusher and electric motor shall be installed on angle iron base. 2. If use diesel engine to power the metal crusher, the power of diesel engine shall be a little larger than that of crusher, meanwhile their pulley groove should be uniform. The external end of the pulley shall be on the same plane.

  2. 3. Before starting the machine, * Check if the connecting bolts are tight. * Check if the tightness of drive belt is proper and whether the rotation of main shaft is flexible. Clean the mess around the belt. * Check if the power line is well. * Check if the shaft of motor and crusher are parallel. * Check if the hammer is good. * Check if the sieve size is proper or if the sieve is broken. 4. After the machine is started, make it run for 2-3 minutes in non-load state, check the rotation direction of the rotor and check if the sound is normal. Feed the materials only when the machine runs smoothly under rated speed. 5. Feed raw materials evenly with certain intervals to ensure thorough crushing and prevent choking. Side feeding or feeding too much should be avoided to prevent overload. If the crusher stops because of choking, turn off the motor immediately and remove the raw materials before restart. 6. Check the load current of the crusher frequently. If it surpasses the defined value, decrease the feeding speed timely or stop feeding. Motor overload is strictly forbidden to ensure normal operation.

  3. 7. In operation often pay attention to the sound of the motor and inside the crushing cavity. If there is loud noise or other abnormal sound, stop the machine immediately for a comprehensive examination. 8. Hard objects like stone, screw and tools mustn’t be mixed in the raw materials to avoid damaging the lining plate inside machine cavity. 9. In operation the operator should not leave the metal crusher. It’s not allowed to dismantle the machine in operation. Tools shall not be placed on the machine or raw materials. 10. Operators should not wear gloves. When choking it is strictly forbidden to put hands into the hopper. Stand by the side of the crusher when feeding materials to avoid hurt by the bounced materials. Wear mask and working cap. 11. Stop feeding materials before shut down and make the machine run for 5 more minutes to expel the materials inside the crushing cavity completely and then turn off the motor. Clean and maintain the machine after stopping it.

More Related