1 / 10

DIY Jewelry Making Tips – How to Make Braided Bracelet

Let WigJig be your own jewelry making coach! Gary Helwig, the WigJig jewelry making designer offer jewelry making tips and jewelry making tools/supplies for beginners and experts. Visit https://www.wigjig.com/

wigjig_GH
Download Presentation

DIY Jewelry Making Tips – How to Make Braided Bracelet

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bracelet on a beautiful hand speaks volumes about the persona of a woman wearing and her exotic sense of dressing. If you love wearing bracelets, then there is good news for you i.e. now you can learn the techniques of how to craft braided bracelets for free without leaving your home.

  2. Put your creativity to work and save tons of money by learning how to make your own bracelets with WigJig jewelry making instructions and tips.

  3. Gather Your Jewelry Making Supplies: • Jewelry Making Wire of 24 Gauge (3 Different Colors such as red, white, and yellow.) • 1 Filigree Clasp For A Single Strand Bracelet and Two Medium Jump Rings • Masking Tape Or Other Non-Marking Tape • Nose plier and cutter

  4. Tie a knot at the top of the string, leaving about one inch (2.5 cm) of string above the knot. Secure the top of the bracelet just by holding it between the fingers or by taping or pinning it to a surface and start braiding. Braid the bracelet exactly as you would braid hair. Don't allow the two wires of the same color cross one another.

  5. Continue braiding until you've braided an entire bracelet. Once you've found the desired length of your bracelet, tie the end in a knot, leaving an inch of string. Now grasp the end of the braided segment with nose pliers and bend the 6 wires about 75 degrees.

  6. Tie the two ends of the wire together. Use jump ring to connect the clasp to the loop in the end of the braided wire that you just completed.

  7. Gently bend the braided wire into a round shape either using a bracelet mandrel or by hand. This completes this braided bracelet jewelry making project. Now you wrap it around your wrist and start showing it off.

  8. Ready, set, shop! Let WigJig be your own jewelry making coach! Gary Helwig, the top WigJigjewelry makingdesigner offer jewelry making tutorials, tips and jewelry making supplies for beginners and experts.

  9. Get instructions for making Braided Wire Bracelet out of jewelry wire and jewelry supplies using WigJigjewelry tool. • Visit:www.wigjig.com/jewelry-designs • Call:210-556-1743

More Related