1 / 9

CLIC'08 Technical Issues, Integration & Cost Working Group Overview

This presentation convenes experts to review developments for CLIC main linac and drive beam decelerator including hardware, cooling, vacuum, integration issues, and cost considerations. Sessions cover module layout, linac magnets, tunnel integration, safety, alignment, sub-systems, and cost management.

wlovette
Download Presentation

CLIC'08 Technical Issues, Integration & Cost Working Group Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. “Technical Issues, Integration & Cost”Working Group Presentation Conveners Germana Riddone, Roger Ruber

  2. Working Group Subject Review of • All non-RF hardware,developments necessary for the CLIC main linacand drive beam decelerator • Including the CLIC module,with all its main sub-systems • cooling, vacuum, supports, stabilization and alignment systems • quadrupole and corrector magnets • beam instrumentation → separate working group! • main transfer lines in the CLIC tunnel • and all related integration issues CLIC'08 - Technical Issues, Integration & Cost Working Group Presentation

  3. Program Overview CLIC'08 - Technical Issues, Integration & Cost Working Group Presentation

  4. Program Wednesday 15 October Location: Room B (b/w Main Auditorium & Council Chamber) 08:30 – 12:00: module, tranfer lines and components • G. Riddone: Module layout and main requirements • R. Ruber, D. Schulte: Requirements for main linac magnets • T. Zickler: Preliminary design of a quadrupole for the stabilization bench • R. Zennaro: Structure fabrication and assembly tollerances • L. Soby: Module instrumentation • N. Abbas, J. Huopana: Test module in the TBTS • F. Torai: PETS integration for TBL CLIC'08 - Technical Issues, Integration & Cost Working Group Presentation

  5. Program Wednesday 15 October Location: Room B (b/w Main Auditorium & Council Chamber) 13:30 – 18:30: tunnel integration and safety • B. Jeanneret: Long tranfer line • J.A. Osborne: CLIC tunnel layout and cross-section • C. Martel: Cooling and ventilation in the tunnel • A. Samoshkin: Module integration • K. Kershaw: Transport of the CLIC modules and elements • V. Kuchler: ILC underground consideration • G. Shirkov: Dubna siting and ILC activity at JINR • F. Corsanego: Safety issue for underground structure • Th. Otto: Simulation of radiation levels in the tunnel • H. Braun: Common ILC/CLIC note on tunnel safety CLIC'08 - Technical Issues, Integration & Cost Working Group Presentation

  6. Program Thursday 16 October Location: Salle Curie (Bldg. 40-S2-C01) 08:30 – 10:00: alignment • K. Kubo: Simplified alignment model for beam dynamics simulations for ILC • H. Mainaud Durand: Pre-alignment study status and model for the beam dynamics simulations • K. Artoos: Recent ground motion measurements at CERN CLIC'08 - Technical Issues, Integration & Cost Working Group Presentation

  7. Program Thursday 16 October Location: Room B (b/w Main Auditorium & Council Chamber) 10:30 – 12:00: sub-systems • A. Jeremie: Stabilization system • F. Lackner: Main beam quadrupole support • R. Nousiainen: Module supporting system • R. Nousiainen: Progress on study of module cooling • C. Garion: Vacuum requirements and preliminary design of vacuum system for module and transfer lines CLIC'08 - Technical Issues, Integration & Cost Working Group Presentation

  8. Program Thursday 16 October Location: Room B (b/w Main Auditorium & Council Chamber) 13:30 – 18:30: cost issues • J. Purvis: Project management and control system overview • H. Braun, G. Riddone: CLIC cost requirements • J. Carwardine: ILC software tool considerations for cost estimate • J. de Jonghe: CERN proposal for software tool for cost estimation • K. Foraz: CLIC schedule CLIC'08 - Technical Issues, Integration & Cost Working Group Presentation

  9. Program Overview CLIC'08 - Technical Issues, Integration & Cost Working Group Presentation

More Related