1 / 22

Topics of Discussion

A Cell to Cell Routing Model By : Rajeev Raina CVEN 689 Civil Engineering Applications of GIS Instructor : Dr. Francisco Olivera. Topics of Discussion. Introduction Significance of this work Methodology Goals Ahead. Introduction. What is a Cell to Cell routing model?

woody
Download Presentation

Topics of Discussion

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A Cell to Cell Routing ModelBy : Rajeev RainaCVEN 689 Civil Engineering Applications of GIS Instructor : Dr. Francisco Olivera

  2. Topics of Discussion • Introduction • Significance of this work • Methodology • Goals Ahead

  3. Introduction What is a Cell to Cell routing model? 1. It’s hydrological routing model. 2. Calculates the storage and the flow at any instant at any point in the watershed. 3. A model that divides the watershed into small cells which can be approximated as linear reservoirs. 4. These cells are further divided into small tanks

  4. The Linear Reservoir Inflow (I) Outflow (Q) Q T

  5. Significance This model divides this linear reservoir into a cascade of small reservoirs So what's the advantage of this algorithm? Q T

  6. Significance Now the stream network in a watershed can be represented like this

  7. Parameters Here is the hydrology for the model • Storage (S) α [Initial storage (So), Runoff (R) ,Inflow(I),Outflow(O)] • Outflow = S*V/Reach (Reach = Flow length, V = Velocity of flow) • K = Reach / V ( K = Storage constant) • N = No of Small Tanks • N = V*Reach / 2*D (D= Coefficient of Dispersion) • N < 36 K2/ (ΔT) 2(ΔT = Time Step given by the User) • 5. k = K / N

  8. Data 1. 500 meter DEM of the United States (From USGS) 2. Real time Runoff data

  9. Methodology • Clip the source DEM to the size that required for the study. • 2. To Fill the DEM for fill all the Sinks that had been • created by means other than natural means. • To find the flow direction grid from the given DEM • To find the flow accumulation grid • To find the stream network • To delineate the watershed • 7. To overlay the watershed with a mesh • 8. To Transfer the flow properties of the stream to the mesh. • 9. Use the mesh with modified properties to calculate the storage and flow

  10. Processing the DEM The DEM the I had was a 500 m DEM of the United States. This was clipped to obtain the area that is there covered by the Brazos basin This is the DEM that I obtained after filling the sinks.

  11. Flow Direction and Accumulation Grids The Flow direction and accumulation grids were obtained by running the AML commands Flowdirection and Flowaccumulation

  12. Stream Networks The Streams grid was obtained by giving the condition that the streams with the flow from more that 100 streams upstream be included.

  13. Watershed Delineation and addition of a buffer 1. Once the stream network was obtained we delineated the water shed. 2. Then a buffer with a distance of 50 km from the watershed boundary was marked just for the purpose of ensuring that we didn’t lose any data 3. Then a mesh of cell size 10 *10 miles was over laid on the buffer. 4 This mesh was made to intersect with the buffer using an AML. 5. The output of this process is a table with the following attributes: Recno., Length,Fnode,Tonode,Meshid

  14. Processing the Results 1. The Upstream flow length and Order program 2. The Output Table -Attributes : BoxId, DSboxID, Area, Reach, FDBoxID 3. Checking the Table for Inconsistencies and Errors 4. Correcting the Errors manually

  15. Flow direction, Flow accumulation and Stream network grids for the mesh Flow direction Flow Accumulation Stream Network

  16. Fixing the outlet for the Brazos 1. The point selected was the end of the main stream. 2. This was added as a point theme and then converted into a grid.

  17. Watershed Delineation Using the outlet and the flow direction grid of the mesh the watershed was delineated.

  18. Comparison with the earlier generated Watershed Once the water shed that we got from the mesh and that of the stream earlier was compared we find that they matched pretty well.

  19. Visual Basic Code • Developed a visual basic code which calculates the storage and the flow. • 2. This input for this program will be the table in comma delimited format which we got from the watershed generated earlier and so will be the output. • 3. The user is asked for a input time step which is used for the calculation of N ( the number of small tanks) • 4. The program then gives the user reports that could be weekly/daily/hourly or as desired.

  20. Goals Ahead 1. To test the model. 2. To make a query attachment that will give the user precise data that he/she wants.

  21. Questions ??

  22. Thank You

More Related