1 / 36

Resident Physics Lectures

Resident Physics Lectures. Christensen, Chapter 2B Tube Ratings. George David Associate Professor Department of Radiology Medical College of Georgia. Heat Units. A unit of energy Single Phase Definition Kilovoltage X tube current X exposure time kVp X mA X sec

wyanet
Download Presentation

Resident Physics Lectures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Resident Physics Lectures • Christensen, Chapter 2B Tube Ratings George David Associate Professor Department of Radiology Medical College of Georgia

  2. Heat Units • A unit of energy • Single Phase Definition • Kilovoltage X tube current X exposure time • kVp X mA X sec • Three Phase (constant potential/high frequency) Definition • 1.35 X Kilovoltage X tube current X exposure time • 1.35 X kVp X mA X sec

  3. Heat Units • 70 kVp • 200 mA • 0.25 second Heat Units Single Phase Exposure • 70 X 200 X 0.25 = 3500 heat units ?

  4. Heat Units Heat Units Three Phase Exposure • 60 kVp • 100 mA • 0.1 second • 60 X 100 X 0.1 X 1.35 = 810 heat units ?

  5. Heat is the Enemy X-Ray Tube Heat

  6. Tube Rating Chart • Indicates load limit tube can safely accept • Based upon • Tube construction • High VoltageWaveform

  7. Tube, Target, & Ratings • surface area bombarded by electrons • focal spot size (actual) • target angle • anode diameter • Melting point • Heat transfer • Anode rotation speed

  8. Tube Rating Charts • single exposure • multiple rapid exposure (angiographic) capability

  9. Single Exposure Rating Charts • Tube specific • Incorporated in virtually all generators • prevents illegal single exposures • Better ratings (more heat allowed) for • Large focal spot • High speed anode rotation

  10. Typical Single-Exposure Tube Rating Chart • shows maximum exposure time for single exposure at given kV & mA

  11. Example • What is the maximum exposure time at 90 kVp & 300 mA?

  12. Example • What is the maximum exposure time at 120 kVp & 400 mA? Can’t do 120 kVp at 400 mA for any exposure time. ?

  13. Single Exposure Rating Charts • Actually 8 charts combining: • generator • single phase (1F) • three phase (3F) • focal spot • small • large • anode speed • standard (3400 rpm) • high (9600 rpm) 1FSFS3400 RPM 3FSFS3400 RPM 1FLFS3400 RPM 3FLFS3400 RPM 1FSFS9600 RPM 3FSFS9600 RPM 1FLFS9600 RPM 3FLFS9600 RPM

  14. On-Board Tube Rating Charts • Checks to see if legal exposure at low-speed rotation. • Automatically switches to high speed anode rotation as needed • Locks out illegal exposures Safe at3400rpm? Safe at9600rpm? No No No ExposureAllowed Yes Yes Allow 3400 rpm Exposure Allow 9600 rpm Exposure

  15. Kilowatt Rating • Ability of x-ray tube to make single exposure of reasonable duration (usually .1 sec.) • Found on tube rating chart • standard assumptions • Use 0.1 sec. exposure time • Three phase chart • high speed rotor rotation

  16. Kilowatt Rating (cont.) • Units 1 watt = 1 volt X 1 amp 1 watt = 1 kilovolt X 1 mA 1 kilowatt (kW) = 1 kilovolt X 1 mA / 1000 • kW rating for a standard 0.1 sec exposure kW rating = kVp X mA / 1000 • use maximum mA at given kVp @ .1 sec

  17. Kilowatt Rating (cont.) • 100 kVp exposure usually used • For a 100 kVp, .1 sec exposure kW rating = mA / 10 Use maximum mA at 100 kVp, .1 sec. • Each focal spot has its own kW rating X Interpolate! ~32 kW

  18. Anode Thermal Characteristics Chart • 2 charts in one • cooling curve in absence of heating • anode heating • for continuous heat input (fluoroscopy)

  19. Continuous Heating - Fluoroscopy • Fluoro almostalways single phase • Find appropriate curve • HU/sec = kVp X mA • Follow from current heat to right for fluoro time

  20. Continuous Heating - Fluoroscopy • Technique • 100 kVp • 6 mA • 600 HU/sec • Start with50,000 HU • Fluoro for3 minutes ~105,000 HU x x 3 minutes

  21. Cooling • Start on cooling curve with current heat units • 110,000 for this example • Cool for2 minutes x x ~40,000 HU x 2 minutes

  22. Angiographic Rating Chart • Provides maximum heat units per exposure for given # of • exposures per second • total exposures Total # of Exposures Exposurespersecond Maximum Load in Peak kV X mA X sec.

  23. Example 90 X 100 = 9000 (Maximum Load) • How many total exposures can be done at • 90 kVp • 100 mAs • 3 frames / sec. Total # of Exposures 13 Exposurespersecond Maximum Load in Peak kV X mA X sec.

  24. Tube Rating Considerations • ability of tube to withstand multiple exposures during several hours of heavy use depends upon • anode storage / cooling curves • housing storage / cooling curves • housing cooling can be improved with • fans • oil / water circulators

  25. Tube Damage Warning

  26. Anode Damage • heat capacity exceeded • melted spots on anode • thermal shock (high mA on cold anode) • can cause cracks in anode (tube death)

  27. Protecting the Anode • Tube warm-up • Eliminates thermal shock from high mA exposures on cold anode • Warm-up needed whenever tube cold • once in the morning not sufficient if tube not used for several hours

  28. + arcing High Voltage Arcs • electrons move from filament to tube housing instead of to anode • can be caused by filament evaporation • deposition of filament on glass envelope as result of • high filament currents • long filament boost time • reduce by not holding first trigger longer than needed • very short exposure with instantaneously very high mA • Generator often drops off line

  29. Tube Insert Damage • Bearing Damage • prevents proper rotation of anode • anode can run too slow • anode can stop • results in thermal damage to anode (melted spots) • Filament break • renders one focal spot completely inoperative

  30. Reducing Tube Wear: Lower mA 80 kVp 500 mA, 0.1 sec 80 kVp 100 mA, 0.5 sec or • Both exposure are 50 mAs • Same radiation to image receptor • Same dose to patient Don’t smoke that tube

  31. Reducing Tube Wear: Lower mA 80 kVp 500 mA, 0.1 sec 80 kVp 100 mA, 0.5 sec or • Low mA reduces tube wear • filament temperatures lower • reduces filament evaporation Don’t smoke that tube

  32. Reducing Tube Wear: Lower mA 80 kVp 500 mA, 0.1 sec 80 kVp 100 mA, 0.5 sec or • use lowest mA (and largest focal spot) consistent with patient motion considerations • Large focal spot allows higher mA to be used Don’t smoke that tube

  33. Reducing Tube Wear: Raise kVp 70 kVp 100 mAs 90 kVp 40 mAs or • High kVp exposures require less heat units for same film density • higher kVp more penetrating • High kVp also reduces patient exposure • More penetrating beam • BUT higher kVp reduces contrast • Use highest kVp consistent with required contrast Don’t smoke that tube

  34. Reducing Tube Wear • Reduce use of high speed anode rotation • use longer times instead of higher kV and/or mA • High speed rotation greatly increases bearing wear • generators automatically select high speed for high combinations of kV & mA • BUT longer exposure times • increase exposure time & patient motion • use lowest mA consistent with patient motion considerations Don’t smoke that tube

  35. Reducing Tube Wear • Reduce first trigger holding time • Reduces bearing wear • Reduces tube rotation time • Reduces filament evaporation • filament evaporation can lead to tube arcing • Holding first trigger sometimes necessary • synchronizing breathing for children Don’t smoke that tube

  36. Oil Leaks • May be accompanied by air bubble in housing • Eventually causes high voltage arcing • Requires immediate service attention

More Related