200 likes | 364 Views
Buzz is Poisoned. By: James Hughes. Introduction. On August 9 th 2010, Buzz Lightyear was poisoned by one of the people invited to their party Each member of the party was asked to bring water, a wrap, a powder, and a hot dog
E N D
Buzz is Poisoned By: James Hughes
Introduction • On August 9th 2010, Buzz Lightyear was poisoned by one of the people invited to their party • Each member of the party was asked to bring water, a wrap, a powder, and a hot dog • When the person poisoned Buzz they left their materials behind the materials were tested to find out what they were and match it with one of the members of the party
Hypothesis • I think Shrek poisoned Buzz Lightyear because the materials seem to look like water, iron and sucrose
Materials • Triple beam, well plate, spoons, beakers, stirring rods, eyedroppers, matches, sodium bicalorde, paper cups, conductivity meter, hot plates, balerea, iodine, HCI, forceps
Procedure (Powder) • Solubility: The powders were placed in water and stirred with stirring rods to determine its solubility • Conductivity: The powders had the conductivity meter put inside them to determine its conductivity • Reactivity: Vinegar was poured on the powder to determine its reactivity • Flammability: Matches were lit and put on the powder while the powder was on the melting pot • Melting: After they were lit on fire with the matches the powder sat for a 5 hours to determine if they melted
Procedure(Drinks) • Density: Water was placed in a beaker while each of the drinks was placed in the beaker and see which drink went above the water • Conductivity: The drinks had the conductivity meter put on them to get a reading • Flammability: The drinks were poured in beakers and matches were lit and put on the drink to see if it caught on fire • Reactivity: The reactive material was poured onto the drinks to discover its reactivity
Procedure • Reactivity: Sodium Polyacrylate was poured on each on the wraps to discover its reactivity • Density: water was poured into the beakers and then each one of the wraps were poured into the water to find put if the density was less than or greater than 1 • Conductivity: The wraps were placed on the conductivity meter to discover its conductivity • Malleability: Each one the wraps were tried to be bended to see if it would bend • Lusted: To see if the wrap was shiny
Procedure • Pre squeezed mass: Each one on the hot dogs is placed on the triple balanced beam to find out its mass • Post squeezed mass: Each one of the hot dogs was placed on the triple balanced beam after having its interior squeezed out • Conductivity: After the interior of the hot dog were squeezed the conductivity meter was placed on them to find out its conductivity • Density: The pre squeezed hot dog was placed on the triple balance beam. Then placed in the beaker with water filled in and then divided the mass by volume to find its density • Reactivity: The reactive material was placed on the post squeezed hot dog to find out how black it turned or at all
Conclusion • In my hypothesis is believed that Shrek was the person who poisoned Buzz Lightyear. As the tests moved on it started to look like it wasn’t Shrek and it was Ariel.Both Shrek and Ariel had water, iron, sucrose so they both had very similar materials. The reason it wasn’t Shrek is that the hot dog was not fat free it was pork. It wasn’t that bad of a guess but it was wrong
Ariel did it • It seems that all the evidence points to Ariel as the person who poisoned Buzz Lightyear. It seems that Ariel should be arrested for the attempted murder of Buzz Lightyear. Too many problems didn’t occur in this experiment. I would have liked to do more experiment to become more accurate but we don’t have all the time in the world. Ariel poisoned Buzz.
Bib • http://www.disneypicture.net/r-buzz-lightyear-202-buzz-lightyear-cd-cover-1600-2959.htm