1 / 62

PUSH TO BEGIN

PUSH TO BEGIN. Lego Robotics Overview. Introduction. Audience Introductory course intended for 6 th -8 th grade students, but can be adapted to classrooms K-12. Science courses, Inquiry based lessons The focus is on developing: Critical Thinking Skills Problem Solving Skills

xenon
Download Presentation

PUSH TO BEGIN

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PUSH TO BEGIN

  2. Lego Robotics Overview Introduction Audience Introductory course intended for 6th-8th grade students, but can be adapted to classrooms K-12. Science courses, Inquiry based lessons The focus is on developing: Critical Thinking Skills Problem Solving Skills Scientific Method Knowledge Data Analysis Objective The learner will understand inquiry based learning and gain experience with critical thinking and problem solving skills (satisfying Michigan GLCE S.IP.M.1) The learner will investigate scientific problems, and will analyze data and conclude based on this data (satisfying Michigan GLCE S.IA.M.1) By Dan Winther

  3. Navigating The Project Before we get started, let’s look at how to navigate through the presentation. If a button is gray, that means you cannot perform that action on this slide This button navigates to the previous slide This button will always navigate back to the Project Outline This button will navigate you to the next appropriate slide

  4. Project Outline Home Screen 1. Introduction to Lego Robotics START HERE! 2. Exploration of Materials 3. Challenge #1: Sound Sensor 4. Challenge #2: Ultrasonic Sensor 5. Challenge # 3: Hit Red Ball 6. Exploration of Additional Materials

  5. Project Introduction What is Lego Robotics? The Lego NXT Program consists of three steps that are interconnected and repeated throughout the program. Click on each of the three steps to learn more…

  6. Project Introduction Build Your Robot Step 1 • Specific building instructions for a robot are provided in two ways: • either in your Building Guide provided with each kit, or • using the LEGO® MINDSTORMS® Education NXT Software. Return to Previous Slide

  7. Project Introduction Step 2 Program Your Robot • Program your robot using the LEGO MINDSTORMS Education NXT Software. • Many examples are included in the Robot Educator, a video based instruction resource. • Download your program to the NXT brick. Return to Previous Slide

  8. Project Introduction Step 3 Test Your Robot • Run your program. • What happens? • Did your robot perform as you expect? • If not, adjust your robot or your program and try again!

  9. Project Introduction v Exemplary Video Click the quick video above, which shows exactly what Lego Robotics is all about. See if you can point out the three steps involved with the process! Remember, BUILD.PROGRAM.TEST

  10. Quiz 1: 3 Steps Question 1 • What step in the process involves developing the instructions and “telling the robot” what it must do. Wait! I need more review! Build Program Test

  11. Quiz 1: 3 Steps Question 1 Incorrect…but why? Think about the question. The students are giving the robot instructions, without which the robot would not move! What step involves telling the robot it’s “job”? Try Again!

  12. Quiz 1: 3 Steps Question 1 Great Job!

  13. Quiz 1: 3 Steps Question 2 • What is the initial step in the process where you follow specific instructions to create a robot. Wait! I need more review! Build Program Test

  14. Quiz 1: 3 Steps Question 2 Incorrect…but why? Think about the question. This step is preparing the robot for its task by giving it the appropriate sensors and making sure it is constructed correctly. Try Again!

  15. Quiz 1: 3 Steps Question 2 Great Job!

  16. Quiz 1: 3 Steps Question 3 • What is the step where you see if the robot performs the task correctly. If not, you may have to go back to the • previous step! Wait! I need more review! Build Program Test

  17. Quiz 1: 3 Steps Question 3 Incorrect…but why? Think about the question. This is the step that you will spend most of your time in. This step involves running the program and collecting data from your robot. Try Again!

  18. Quiz 1: 3 Steps Question 3 Great Job!

  19. Exploration of Materials NXT Sensors Click on each of the sensors and the brick below to learn more about their function. When finished, take the Quiz.

  20. The Ultrasonic Sensor enables your robot to see and recognize objects, avoid objects, measure distances as well as detect movement. This sensor uses the same scientific principle that bats use. It measures distance by calculating the time it takes for a sound wave to hit an object and come back. Think of it like an echo! The sensor measures distance in centimeters and inches. Large-size objects are easier for the sensor to detect. Sometimes objects that are round, made of soft fabric or very thin can be hard for it to detect.

  21. Touch Sensors • Enable the robot to respond to obstacles in the environment. Think of the touch sensor like a button. When the button is pressed or bumped, it will detect the press or bump and react accordingly. You can use this sensor to have your robot hit a wall, but back up and turn when it hits if the touch sensor is activated.

  22. Sound Sensor • Enables the robot to respond to sound levels. • Also known as a decibel meter The sound sensor detects decibel level. What that means is that the sensor will be able to detect how soft or loud a sound is. The sensor detects both dB and dBA. dBA: sounds human ears are able to hear dB: all actual sound, including sounds too high or low for the human ear to hear.

  23. Light Sensor • Enables the robot to respond to variations in light level and color. The Light Sensor enables the robot to distinguish between light and darkness, to read the light intensity in a room and to measure the light intensity on colored surfaces. The diagram shows how the light sensor see’s different colors. It will not detect actual color, but it will detect differences in light and dark.

  24. Interactive Servo Motors • Ensure that robots move smoothly and precisely. The Interactive Servo Motor give the robot the ability to move. When you program using the Move block, the motors are automatically aligned so their speed is the same. When you change the speeds of the motors, you will see that it allows your robot to perform many different functions, including more speed, as well as make turns.

  25. NXT Brick Lego NXT Brick An intelligent, computer-controlled LEGO® brick, the NXT is the brain of the LEGO MINDSTORMS® Education robot.

  26. Quiz 2: Sensors Almost There! Before we get started with the building, programming and testing, let’s review our basic sensors! Click the “Next” button when you are ready to begin the quiz.

  27. Quiz 2: Sensors Question 1 Tim wants to build and program a robot that goes forward until the robot “sees” a wall, and then backs up and turns. Which sensor would work best for this program? a). Ultrasonic b). Sound c). Touch d). Light MORE REVIEW PREV

  28. Quiz 2: Sensors Question 1 Incorrect! HINT: Tim is going to use the same idea that bats use to locate things in the dark. This sensor will use waves to calculate distance. TRY AGAIN

  29. Quiz 2: Sensors Question 1 Great job! Bats use ultrasonic waves to locate food and objects in the dark. If Tim uses this sensor, his robot should “see” the wall and turn around! NEXT

  30. Quiz 2: Sensors Question 2 Melissa is trying to program a robot to follow a black line using tape on the classroom floor. The floor is white and the tape is black. Which of the NXT sensors would work best for this program? a). Ultrasonic b). Sound c). Touch d). Light MORE REVIEW PREV

  31. Quiz 2: Sensors Question 2 Incorrect! HINT: Remember this diagram! TRY AGAIN

  32. Quiz 2: Sensors Question 2 Super Job! Although the sensor does not see color, it will see the difference between light and dark objects! If programmed right, this robot should follow any line on the floor. NEXT

  33. Quiz 2: Sensors Question 3 Chase is interested in making a bumper car robot. He and his friend Charlie are going to build the robots and when they hit, they should reverse and turn around. What sensor would you recommend that they use? a). Ultrasonic b). Sound c). Touch d). Light MORE REVIEW PREV

  34. Quiz 2: Sensors Question 3 Incorrect! If Chase wants to make a bumper car, it means that his robot is going to hit an object (whether it be the wall or another car), and then turn and go forward. What type of sensor needs to be pressed or pushed? TRY AGAIN

  35. Quiz 2: Sensors Question 3 Way to Go! Since Chase wants a bumper car, the key to building such a robot is to have a touch sensor equipped to detect a press or push. NEXT

  36. Quiz 2: Sensors Question 4 Kaycee loves her new puppy, which is why she built the puppy robot. Just like her new pup, when Kaycee calls the dog, the dog moves towards her. What sensor did Kaycee use for this program? a). Ultrasonic b). Sound c). Touch d). Light MORE REVIEW PREV

  37. Quiz 2: Sensors Question 4 Incorrect! Kaycee is relying on her voice to tell the puppy what to do. If she uses this sensor, it will be able to detect her voice and the robot will react accordingly. What sensor would perform this task? TRY AGAIN

  38. Quiz 2: Sensors Question 4 Correct! When she calls the puppy, Kaycee’s voice will be sensed by the sound sensor, and the puppy should turn and move towards her. FINISH QUIZ

  39. Now the Fun Part! Engineer Mission #1 Now that you are an expert in all things Lego Robotics, you have been hand selected to complete a mission. NASA is looking for individuals who can engineer (build, program and test) different robots to perform various tasks. If you are up for the challenge, click “Next” to begin.

  40. Dear Lego Engineer, NASA is in dire need of a new prototype, and we think you are the perfect candidate for the job! We have recently been conducting research on Mars, and our next mission’s objective is to detect sound on the planet. What we need from you is a prototype that has the ability to detect sound. We would like the prototype to detect sound using one of the Lego sensors, and when it hears something it should stop moving. Thank you for your cooperation with NASA! We are excited to work with you in the future!

  41. Engineer Mission #1 Step 1: Build Remember, you can find the instructions for building your robot in the kit, or using the NXT software (installed on the desktop of your computer) You are beginning with a simple base model with a sound sensor attached. You can find the instructions for building the robot on Page 3 of your instructions. Your robot should look similar to the robot above.

  42. Engineer Mission #1 Step 2: Program Instructions for programming the robot are in your instruction manual. Using the NXT Software, watch the introductory video and then follow the step by step instructions. Download and Print the “Lego Student Programming Guide” and fill it out as you program and test your robot. Your program should look similar to the program above.

  43. Engineer Mission #1 Step 3: Test To test, press the center Orange Button on your NXT Brick and watch what the robot does. Be sure to fill out the Student Programming Guide as you test. Fill out both the “What worked?” and “What didn’t” sections. If your robot did not perform it’s intended function, go back to the previous step and modify your program. Student Programming Guide should be continuously filled out!

  44. Dear Lego Engineer, Congratulations! We have received word that you were successful in your Sound Sensor Prototype! We would love to see what you have done! Please visit your student blog and complete a post that details what you built. Include a description of what the robot does, a picture of the robot, and maybe even a video of the robot in action! We look forward to seeing what you have done! View Rubric

  45. Engineer Mission #1 • To receive credit for completion of the Sound Sensor Prototype, you must log into your student blog and make a new post with the following information:

  46. Example Blog Posting NASA Prototype #___ – Student A and Student B (insert description of mission, prototype details, function) Picture or Video of Prototype When you are done with your first blog posting, you may push “Next” to move onto your next mission!

  47. Dear Lego Engineer, You did such a great job with the Sound Sensor Prototype, so we thought we could give you another mission! What we need from you is a prototype that has the ability todetect movement. We would like the prototype to detect movement using a Lego sensor. Thank you for your cooperation with NASA! We are excited to have you on our team!

  48. Engineer Mission #2 Step 1: Build Remember, you can find the instructions for building your robot in the kit, or using the NXT software (installed on the desktop of your computer) This model is involves using the Ultrasonic Sensor to detect movement. You can find building instructions for this robot on page 9, or in the NXT Software under “Detect Movement” Module. Your robot should look similar to the robot above.

  49. Engineer Mission #2 Step 2: Program Instructions for programming the robot are in your instruction manual. Using the NXT Software, watch the introductory video and then follow the step by step instructions. Continue using the Student Programming Guide as you build and test this robot. Your program should look similar to the program above.

  50. Engineer Mission #2 Step 3: Test To test, press the center Orange Button on your NXT Brick and watch what the robot does. Be sure to fill out the Student Programming Guide as you test. Fill out both the “What worked?” and “What didn’t” sections. If your robot did not perform it’s intended function, go back to the previous step and modify your program. Student Programming Guide should be continuously filled out!

More Related