1 / 6

ECE 362 Honors

ECE 362 Honors. Project Review and Useful Sources. Mini-Project Functional Requirements. design your own embedded system using the 9S12C32 microcontroller

yana
Download Presentation

ECE 362 Honors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE 362 Honors Project Review and Useful Sources

  2. Mini-Project Functional Requirements • design your own embedded system using the 9S12C32 microcontroller • project must operate in a “turn-key” fashion (your code should be stored in the on-chip flash memory and start up directly out of reset) • the project should be “stand-alone” (self-contained) • make good use of peripherals (ATD, SCI, SPI, TIM, PWM) need 4 • utilize on-chip resources (RTI,SRAM, flash memory, etc) • Check out the Mini-Project Page • https://engineering.purdue.edu/ece362/MiniPrj/index.html

  3. Peripheral Review • ATD: Analog-To-Digital • Converts analog sensor data to digital form for micro • SCI: Serial Communications Interface • Enables serial (one bit at a time) exchange of data between microprocessor and other peripherals such as mice, sensors, etc. • SPI: Serial Peripheral Interface • synchronous serial data link. Operates in full duplex mode. Communicate in Master/Slave mode. • TIM: Timer Module • PWM: Pulse-Width Modulator • Used for Motors, LEDs etc

  4. Places to order components • Basic components • Newark • Digikey • Mouser • All other needs • Sparkfun (good variety of sensors, micros, etc and nice blog support) • Octopart- great for comparing prices between vendors • For future reference a nice place for ordering PCBs is SeeedStudio's Fusion PCB service. If turn time isn't critical, it tends to be one of the better deals around.

  5. Forums/Blogs for Project Help/Ideas • Dangerous Prototypes (in particular does phenomenal open source work centered around PIC microcontrollers) • Hackaday (tons of project ideas and support on how they were done) • Dutchforce Electronics forum • Decent subreddits • http://www.reddit.com/r/nicechips/ • http://www.reddit.com/r/ECE/ • http://www.reddit.com/r/electronics/ • EEVblog (decent videos/ equipment use overviews)

  6. Altium Licenses • Can only be installed on ECE computers at this time • Can still put copies on lab computers which you may access remotely

More Related