1 / 3

Exercise 3

Exercise 3. 7th FLUKA Course NEA Paris, Sept.29-Oct.3, 2008. Ex #3. download the solution of ex2.inp from the website into a new ex3 directory and rename it to ex3.inp open it using FLAIR convert the cylinder to an infinite one use a ZCC body for the cylinder

yehudi
Download Presentation

Exercise 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Exercise 3 7th FLUKA Course NEA Paris, Sept.29-Oct.3, 2008

  2. Ex #3 download the solution of ex2.inp from the website into a new ex3 directory and rename it to ex3.inp open it using FLAIR • convert the cylinder to an infinite one use a ZCC body for the cylinder use two XYP planes, at z=0. and z=10.cm, to cut it re-define the regions TARGET and VAC run

  3. Ex #3 • segment the target into three pieces by two transverse cuts first segment: from z=0. to z=1.cm (new XYP needed) second segment: from z=1.cm to z=2.cm (new XYP needed) third segment: from z=2.cm to z=10.cm (no further bodies needed) define the 3 target regions assign them water, ALUMINUM (pre-def), and LEAD (pre-def) • activate the geometry debugging with a 1mm grid from (x,y,z)=(-6.,0.,-6.) to (x,y,z)=(6.,0.,11.) see in the manual the GEOEND card run, search for Geometry debugging in the .out file, and enjoy the lack of errors • perform the same operation by the dedicated FLAIR Process/Debug frame

More Related