1 / 40

2. VLSI Basic

2. VLSI Basic. Hiroaki Kunieda Dept. of Communication and Integrated Systems Tokyo Institute of Technology. VLSI Design with Verification. Specification. System Design. System Verification. RTL. Logic Design. Logic Verification. Netlist. Layout Design. Layout Verification. Mask Data

yvonne
Download Presentation

2. VLSI Basic

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 2. VLSI Basic Hiroaki Kunieda Dept. of Communication and Integrated Systems Tokyo Institute of Technology

  2. VLSI Design with Verification Specification System Design System Verification RTL Logic Design Logic Verification Netlist Layout Design Layout Verification Mask Data Test Data

  3. 1.3 Logic Gate

  4. Logic Gate

  5. Logic Theory [Completeness] • Function {|}=NAND function: complete • 1: a|(a|a) = a|a’ = 1 • 0: {a|(a|a}|{a|(a|a)} = 1|1 = 0. • a’: a|a = a’. • ab: (a|b)|(a|b) = ab • a+b: (a|a)|(b|b) = a’|b’=a+b • NOR function: complete • AND and OR function: not complete [Irredundant] no literal can be removed. redundant Ab+ab’=a

  6. Data sheet for 45nm Process

  7. Data sheet for 45nm Process

  8. MOS • “MOS” : sandwichstructure of Metal, Oxide, and Silicon (semiconductor substrate). • The positive voltage on the polysilicon forms gate attracts the electron at the top of the channel. • The threshold voltage (Vt) collects enough electrons at the channel boundary to form an inversion layer (p -> n). Field Oxide Gate Oxide

  9. Transistor Parasitics • Cg: gate capacitance = 0.9fF/μm2 (2 μprocess) • Cgs/Cgd: source/drain overlap capacitance =Cox W (Cox: gate/bulk overlap capacitance)

  10. A Simple Transistor Model Linear region Saturated region • nMOS transistor become on by applying high voltage to gate to provide current. • pMOS transistor becomes on by applying low voltage to gate to provide current

  11. Static Complementary Gates VDD Pullup network (pMOS) • output is connected to VDD Ro/W CoW Ro/W CoW Pulldown network (nMOS) • Output is connected to VSS Pull down Pull up VSS

  12. Vin-Vout DC Characteristics VOH Noise Margin NML = VIL-VOL NMH = VOH-VIH VIH VOL VIL

  13. CMOS NAND & NOR Pullup network (pMOS) • output is connected to VDD when ab=0. VDD Pulldown network (nMOS) • Output is connected to VSS when ab=1. VSS

  14. Relation between nMOS and pMOS Dual graph

  15. And Or Inverter (AOI) gate (ab+c)’

  16. Adders si =aibici =(aibi)ci = Pici ci+1=aici+bici+aibi=(aibi)ci+aibi =Pici+Gi

  17. 1.3 Gate Delay and Wire Delay

  18. Gate Delay (delay model) Let’s suppose that Wp = 2 Wn which makes the same pull up and pull down current with ON-resistance of, Ro/W where Ro is the resistance per unit width. (ex. 200Ωum) Load capacitance consisting of drain junction capacitance is corresponded by the area of the drain such as CoW where Co is the capacitance per unit width (ex. 50 fF/um) Input capacitance is also represented by CoW L=35 nm=0.035 um (45nm)

  19. Gate Delay CoW Ro/W Ro/W CoW Pull down Pull up Pull up current is represented by VDD/Ron(p). Pull down current is represented by VDD/Ron(n) Gate Delay (W=0.35um, L=0.035um) = (Ro/W) x (CoW) = Ro Co = 200 Ωum x 50pF/um =10psec Pull up/downcurrents are represented by ON resistance, which are reversely corresponded by the channel width W.

  20. 2 stage gates without load • The first term represents the delay of the 1st stage, where the output charge and the input charge of the 2nd stage is pull up or down by the current driven by the 1st gate. Both charge and current corresponds to the size or the channel width w. • The second term represents the delay of the 2nd stage. Without any load to the gates, the delay becomes identical to, which depends on the process. Delay = 1st stage delay + 2nd stage delay = (Ro/W1) (CoW1+CoW2) + (Ro/W2)(CoW2) = RoCo (2+W2/W1) = 10 psec x 3 = 30 psec

  21. 2 stage gates with load Load Capacitance is total sum of input capacitance CoWload Delay = 1st stage delay + 2nd stage delay = (Ro/W1) (CoW1+CoW2) + (Ro/W2)(CoW2+CoWload) = RoCo (2+W2/W1+Wload/W2) Case 1. W2=W1, Load=10W1 Delay = 10 psec (2+1+10) = 130.0 psec Case 2. W2=3W1, Load=10W1 Delay = 10 psec (2+3+3.33) =83.3 psec

  22. Wires DelayElmore Delay Model Delta1=r1 x (C1+---+Cn) =n tc Delta2=r2 x (C2+----+Cn) =(n-1)tc DeltaN=rn x Cn =tc total=Delta1+ ----- + DeltaN =[n(n+1)/2] tc

  23. Wire Delay Rline=2.0 Ω-um Cline=0.3fF/um Ro=200 Ω*um Co= 50 fF/um W1=W2=0.35u Line=2N um Delay=(R0/W1) (CoW1+CoW2+ClineLine) +(RlineLine) (CoW2+(Cline/2)Line) =200 x (2x50f + 2xN)+2 x (10f+0.5N) = 50 nsec + 26*N nsec (line =2xN um) Delay = Ro/W1 (CoW1+CoW2) =2.5K x 20fF =50.0 nsec (line=0)

  24. Wire Delay Rline=500 Ω/um Cline=300 fF/um Ro=25 kΩ*um Co=0.5 fF/um W1=W2=0.35u Line=0.5um Delay=(R0/W1) (CoW1+CoW2+ClineLine) +(Ro/W1+RlineLine) (CoW2+(Cline/2)Line) =50K x (0.5 f + 50K x (0.25+0.125) = 37.5 nsec + 18.8 nsec =56.3 nsec (line =0.5 um) Delay = Ro/W1 (CoW1+CoW2) =50K x 0.5fF =25 nsec (line=0)

  25. 1.4 Flipflop and Memory

  26. Switch Logic Logic 0 transfer Logic 1 transfer

  27. Latch Charge sharing: the stored data of A is connected to the latch’s output. Additional buffer may be required to drive output load.

  28. Clocked Inverter • tristate inverter produces restored output or Hi-Impedance Z • Used as latch circuit

  29. Latch

  30. D Flip-flop Operation

  31. Scan in DFF Functional Schematic of DFF with Scan ACSEL Lab University of California, Davis

  32. Memory Structure Read-Only Memory (ROM) Random Access Memory (RAM) Static RAM (SRAM) Dynamic RAM (DRAM)

  33. Static RAMCell • Read • Precharge bit and bit’ • Asert Select line • Write • Bit and bit’ lines are set to desired values. • Select is set to 1.

  34. RAM Cell • Write • set bit line • Read • Precharge firstly bit line • Activate word line

  35. 1.5 Data Path and Control Circuit

  36. Data Path 1

  37. Control Sequential Logic Circuit

  38. Data Path 2 During Clk=2, adder operation must be completed within 1 clock.

  39. 1.6 Design and Verification

More Related