1 / 20

EMERGENCY POWER FACILITY ASSESSMENT TOOL (EPFAT)

T.J. Fichera Chief, Readiness Office Emergency Manager Pittsburgh District Emergency Power SME Thomas.j.fichera@usace.army.mil 412 292 2538 cell/blackberry. EMERGENCY POWER FACILITY ASSESSMENT TOOL (EPFAT). Emergency Power Mission.

zan
Download Presentation

EMERGENCY POWER FACILITY ASSESSMENT TOOL (EPFAT)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. T.J. Fichera Chief, Readiness Office Emergency Manager Pittsburgh District Emergency Power SME Thomas.j.fichera@usace.army.mil 412 292 2538 cell/blackberry EMERGENCY POWER FACILITYASSESSMENT TOOL (EPFAT)

  2. Emergency Power Mission • Haul, Install, Fuel, Operate, Maintain, Service, Repair Temporary Diesel Generators at Critical Public Facilities • Complete Turn-Key Operation • Assessing (determining) requirement of critical facilities

  3. Typical Power Process

  4. Expedited Power Process X X

  5. Where is EPFAT? Emergency Power Facility Assessment Toolwebsite is linked through theUSACE Public ENGLink Site http:\\www.englink.usace.army.mil The “EPFAT” icon will then automatically transfer the user to the EPFAT website hosted at CESWF

  6. EPFAT - Homepage • Website hosted on “Public” side to allow access • Specific Facility POC User ID and Password required • Once entered user taken to an “https” website • Facility data entry & revisions are complete by designated facility POC user ONLY • Separate “Report Only” user ID/PWs can be issued to: • Local EMs • State EMs • USACE • FEMA • ALL Data Secured by USACE

  7. EPFAT - Login Page • Disclaimer about entering facility/POC information • Individual User Name and Password required • Initial temporary User ID/PW will be provided to Facility • Existing ENGLink Power Module Facility assessment data transferred to EPFAT to establish the initial user set • Data accessible by USACEEM’s, 249thEN BN, Power SME’s, and Senior Leaders • Data and Reports shared to other agencies as requested

  8. EPFAT - User “How-To” GuideData Collection First Step • This guide can be printed prior to filling in the data on-line by Facility Manager and/or Facility Electrician • Afterwards, this guide can be printed by facility and stored for future reference. • Note: Printable PDF (9 Pages)

  9. EPFAT - FAQsAdditional Guidance for User • FAQs will provide additional answers for users for the POC, site facility, geospatial and processes required • New FAQs will regularly be added to reflect responses generated as a result for technical assistance • Two email addresses have been provided to end users to request both technical electrical support and technical EPFAT support

  10. EPFAT - Facility DataFacility Categories • 12 Categories are used to classify all types of facilities • Category chosen based upon function of facility during crisis events • Under each Category, selected are then listed facility “Types” • Reports can be created based upon this data

  11. EPFAT - Facility Data EntryFacility Information Tab • Six main tabs to navigate data input & assessment • Tabs data entry must be completed in order with some data fields Mandatory • Facility Category and Type are “drop downs” and stored • Assessment should be completed by a qualified professional electrician • Entry date is used to ensure data is validated and/or refreshed on 3-year intervals

  12. EPFAT - Facility Data EntryFacility Location Tab • Physical Address Information • Key Data Fields • Lat / Long obtained through web Google map service and/or accurate GPS Unit. • Printing the “How-to” guide will help make data capture and data entry much easier. • Map displays the street address entered. User can zoom, move and/or adjust the “pin” to exact facility site location.

  13. EPFAT - Facility Data EntryPrimary Facility POC Tab • Primary POC’s may be regional but local or on-site is preferred • Some data fields are Mandatory • This data will be used to allow contact to the facility during 3-Yr intervals for data updates and data verification • Email, telephone and address information are critical data to scheduling data updates and maintaining data accuracy

  14. EPFAT - Facility Data EntryAlternate Facility POC Tab • Alternate POC’s may be regional but local or on-site is preferred. • Some data fields are Mandatory. • This data will be used to allow contact to the facility during 3-Yr intervals for data updates and data verification • Email, telephone and address information are critical data to scheduling data updates and maintaining data accuracy

  15. EPFAT - Facility Data EntryGenerator Information Tab • Some data fields are Mandatory • Generator size determined by a “qualified professional”. EPFAT does NOT calculate generator size required (yet?) • Actual Lat/Long geo-location of Generator is stored and “pin” can be moved to exact site location • On-site notes about placement and Generator connection stored • User can upload photographs or other documents (pdf; gif; tiff, etc)

  16. EPFAT - Facility Data EntryData Summary Tab • Summary page is one-page overview of all information and data collected entered for Facility and Generator • Each section can be easily returned to and any information entered edited by user • This information and data is used to print various reports and will be used to print a hardcopy of the Facility Assessment Guide for use by facility.

  17. EPFAT-User FacilityGraphic Display • User facility information will be added to national level database and used by Local/State/Federal R&R agencies during crisis events • Generator Assessment data will be used to identify/pre-position assets whenever possible and for any generator needed at the facility for any given crisis event • E-mail requests will be sent to facility POCs to verify data and information on 3-Yr frequency

  18. Future Uses of the Data Upload facility data for all locations into ENGLink Emergency Power Module (When ENGLink program update replaces existing Power Module). Provide geo-referenced location of facilities and generator locations Plan for pre-event inventory of potential impacted critical public facilities Planning tool for pre-event staging of potential number of facilities with generator requirements and also various generator sizes Improve overall installation response time Improve processes for mobilization / de-mobilization of resources Allow greater flexibility in mission execution Improve overall Federal/State/Local Response & Recovery related to Emergency Power Mission EPFAT -Way Ahead

  19. EPFAT LOGIN http://epfat.swf.usace.army.mil/Welcome.aspx

More Related