1 / 6

PIP Current Status Report March 12, 2014 New Notch Pulser System Testing

PIP Current Status Report March 12, 2014 New Notch Pulser System Testing. S. Chaurize - C. Jensen. Testing/Installation plan. Test cage magnet testing Run short magnets on new pusler system Look at rise times and load matching etc. Gallery Pulser testing and Magnet installation

zea
Download Presentation

PIP Current Status Report March 12, 2014 New Notch Pulser System Testing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PIP Current Status ReportMarch 12, 2014New Notch Pulser System Testing S. Chaurize- C. Jensen

  2. Testing/Installation plan • Test cage magnet testing • Run short magnets on new pusler system • Look at rise times and load matching etc. • Gallery Pulser testing and Magnet installation • Pulse new pulser connected to test load at operational TLG rate along with operational notching power supplies. • When system checks out, look for opportunity to connect to single long magnet in tunnel for Beam operation. • Proceed to two short magnets and two long magnets. • Continue in incremental kicker swaps to 4 short and 1 long magnet configuration during daily shutdown opportunities. • Gallery testing and cage testing are independent of each other

  3. Short Kicker testing with new pulser power supply system in progress Pulser Short kicker magnets

  4. Currently used notching power supply racksNew pulser control rack and power supply Installed and ready for testing

  5. Pulser Ready for Pulse testingIn east Booster Gallery Currently used pulsers

  6. Controls and power supply/load configuration

More Related