40 likes | 173 Views
FT Status and Plans. Overall CTS Worked to get CTS back on line Slots A4-7 have problems Had to work on SBC Don L. is continuing tests with new VRBC and VRB firmware at CTS L1 Deadtime – Extra Data in readout Put 470KOhm 0402 resistors on un-used channels 8 per MCM, 64 per board
E N D
FT Status and Plans • Overall • CTS • Worked to get CTS back on line • Slots A4-7 have problems • Had to work on SBC • Don L. is continuing tests with new VRBC and VRB firmware at CTS • L1 Deadtime – Extra Data in readout • Put 470KOhm 0402 resistors on un-used channels • 8 per MCM, 64 per board • Verify << in process now • Board ready for platform • Set up modification line • Access AFE board swap • CFT • Replaced 9A5 >> dip at X2 • Replaced 7A4 • Inductors to look at double peds • CPS • Re-programmed CPSS personality • FPS • CTT 6 Mayl 2003
July Shutdown • General items being considered • Cryostat work • About 1 degK left in setting • Have been moving about 0.1 • Will not warm up “unless” have further problems • Cassette work • Only if we warm up • Perhaps install ‘testing’ cassette • Will do • Unused channel fix for AFE brds • Check/calibrate/fix AFE lvps monitoring • Add SEQ crate monitoring • Finish LED pulser boards and cabling • New firmware • Fix slot problems – AFE & SEQ • 4B6 SVX Downloads • 6B2/3 SEQ signals @ SEQ BP • May do • AC remote shutoff for AFE lvps • 53MHz readout • Re-cable back of SEQ crate PC04 • Will not do • CPS • FPS • CTT • FPD Starts ~July 28 >> 4 to 6 weeks 6 Mayl 2003
July Shutdown 2 • Details • How long to do? • Who can work on? • When can it be done? Starts ~July 28 >> 4 to 6 weeks 6 Mayl 2003
Merge Shifts • Management has scheduled a merger of CFT and SMT shifts • Would start after shutdown • after MUON and CAL merge • Should be merged by end June • Can the shifts be merged • Reduce the amount of work the CFT shifter does • Increase effectiveness per minute of attention • Improve and condense the documentation • How are shifts merged • Need people from both groups with cross knowledge • Need a small core of people to get it done 6 Mayl 2003