230 likes | 938 Views
Empowering Intelligent Interaction. RF Hardware Setup. Qwizdom, Inc.™ Copyright 2007. Remote Set Contents. Q4 RF or Q5 RF Student Remotes 1 Q5 RF Instructor Remote 1 RF Host Charger Multi-Charger (if applicable) Screwdriver, Screws, Batteries (if applicable) Software
E N D
Empowering Intelligent Interaction RF Hardware Setup Qwizdom, Inc.™ Copyright 2007
Remote Set Contents • Q4 RF or Q5 RF Student Remotes • 1 Q5 RF Instructor Remote • 1 RF Host • Charger • Multi-Charger (if applicable) • Screwdriver, Screws, Batteries (if applicable) • Software • Quick Reference Guide • Full User Guide on CD Qwizdom, Inc.™ Copyright 2007
Q4 RF or Q5 RF Remotes Qwizdom, Inc.™ Copyright 2007
Q5 RF Instructor Remote Qwizdom, Inc.™ Copyright 2007
RF Host with USB Cable Qwizdom, Inc.™ Copyright 2007
Accessories The screwdriver is used to secure the screw in the back of the Q4 RF remote. Screws are used to secure the Q4 RF remote battery cover. Qwizdom, Inc.™ Copyright 2007
Accessories Single charger is for the Q5 RF Instructor remote. Multi-charger comes with Q5 RF remotes. “AA” batteries are for Q4 RF remotes. Qwizdom, Inc.™ Copyright 2007
Qwizdom Interact Software Software depends on what is ordered. Qwizdom Interact Qwizdom Actionpoint Qwizdom, Inc.™ Copyright 2007
Hardware Setup Plug the USB Cable into the RF Host. Then plug the other end of the USB Cable into an open USB Port on your computer. Qwizdom, Inc.™ Copyright 2007
Hardware Setup When the RF Host is plugged in, you should receive a ‘New Hardware Found’ prompt in the bottom right of the window. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Click on the ‘New Hardware Found’ prompt. The New Hardware wizard appears. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers The USB Drivers for the RF Host needs to be installed. The USB Drivers are located on the Qwizdom software CD. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Remove the software from the remote set pouch. Place the CD into the CD-ROM drive. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Since there are two USB Drivers that need to be installed for the RF Host, you will need to go through the installation steps twice. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Click on ‘No, not this time’ and click on Next. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Click on ‘Install from a list or specific location (Advanced)’ and click on Next. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Check ‘Include this location in search’ and click on Browse. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Select the USB Drivers folder located on the Qwizdom Interact CD. Then click on OK. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Click on Next. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers The USB drivers will install. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers Click on Finish. Qwizdom, Inc.™ Copyright 2007
Installing the USB Drivers The first USB Driver has been installed. Repeat the steps to install the second USB Driver. Qwizdom, Inc.™ Copyright 2007
Thank you for choosing Qwizdom! Cleveland Office 1-877-794-9366 Seattle Office 1-800-347-3050 Tech Support: support@qwizdom.com Qwizdom, Inc.™ Copyright 2007