1 / 4

IR beam pipe

IR beam pipe. Y.Yamada in SVD meeting on Jan. 11, 2001. Present design. Double wall of Beryllium cylinders inner radius : 10 or 15 mm (will be decided early Feb.?) cooled by PF200 (tested by monitor group) with inner 10 m m gold coating made in Brash-Wellman (10Myen?) in 3 months?

abram
Download Presentation

IR beam pipe

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IR beam pipe Y.Yamada in SVD meeting on Jan. 11, 2001 Present design • Double wall of Beryllium cylinders • inner radius : 10 or 15 mm (will be decided early Feb.?) • cooled by PF200 (tested by monitor group) • with inner 10 mm gold coating • made in Brash-Wellman (10Myen?) in 3 months? • Forward/backward conical sections • made by Tantalum • brazed with SUS ring to be welded with SUS ring on Be part •  under R&D in IHI • surrounded by Tungsten (or Gold or Uranium) masks • with saw shape inner surface (backward) • without inner gold coating • cooled by water tubes brazed outside (no groves) • made in IHI (48Myen?) in 6 months? • Mechanical design • FEM analysis on strength and temperature done by Marc • shows no problem and it will be confirmed by IHI.

  2. Background simulation • 1. Particle background (Karim) • Simulation only in straight section (dose(kRad/y) with design values) • SVD1 1st layer (R=3.0 cm) : (~100 krad/y measured) • 5.5(HER Brems.)+1.1(HER Coul.)+0.3(LER Brems.)+1.8(LER Coul.) • SVD2 1st layer (R=2.1 cm) with R=1.5 cm beam pipe : • 12.0(HER Brems.)+1.4(HER Coul.)+0.9(LER Brems.)+2.1(LER Coul.) • SVD2 1st layer (R=1.5 cm) with R=1 cm beam pipe : • 31.3(HER Brems.)+3.7?(HER Coul.)+2.3(LER Brems.)+8.1(LER Coul.) • Simulation of one turn in HER (without masks) • Brems. : no big change (straight section dominant) • Coulomb : increase by factor ~16 (equal contribution in any place of ring) • Vacuum bump study shows large contribution of straight section •  need to simulate the effect of • (1) multi-turn, (2) movable masks and (3) offset of magnets • 2. Synchrotron light background (Sanjay) • QC1/QC2 are main sources, • but no serious problem found even in injection

  3. Work shop in Hawaii on Jan. 26 and 26, 2001 • Jan. 25 • 1) Overview - 20 min. (Yamamoto) • 2) Vacuum pressure - 45 min. (Kanazawa) • 3) Configurations near IR - 15 min. (Kanazawa) • 4) Beam loss overview - 30 min. (Funakoshi) • 5) Aperture issues - 15 min. (Ohnishi) • 6) Orbit near IP - 15 min. (Ohnishi) • 7) Current and future beam parameters - 10 min. (Funakoshi) • 8) HOM heating - 30 min (Stanic) • 9) Synchrotron background simulation - 30 min (Swain) • 10) Particle background - 45 min (Trabelsi) • 11) Discussion • Jan 26 • 1) Monitoring - 30 min (Tsuboyama) • 2) Pressure bump studies - 45 min (Haba) • 3) Starball - 20 min (Yamamoto) • 4) SVD mechanical design - 30 min (Yamada) • 5) IR beampipe mechanical design overview - 30 min (Yamamoto) • 6) FEA analysis - 30 min (Rosen) • 7) Discussions

More Related