110 likes | 130 Views
This report by Ernie Podraza of Reliant Energy provides an update on the Oil & Gas New Profile Request, including proposed procedural changes and their potential impact on ERCOT, TDSPs, and CRs.
E N D
PWG Update Report By Ernie Podraza of Reliant Energy ERCOT PWG Chair for COPS Meeting August 22, 2006
Oil & Gas New Profile Request • Original filing date 2/28/2003. • Additional Load Research Requested by ERCOT Staff to support analysis of segment population per the Load Profiling Guide. • Load Research analysis presented to PWG 3/30/2006. • ERCOT Staff Recommendation presented to PWG 4/27/2006. • Additional discussions at subsequent PWG meetings and PWG conference call on 7/19/2006. • Perhaps as many as 20,000 ESIIDs affected.
Oil & Gas New Profile Request ERCOT Analysis: http://www.ercot.com/meetings/pwg/keydocs/2006/0330/Oil_%26_Gas_preliminary_sample_r.ppt ERCOT Recommendation: http://www.ercot.com/meetings/pwg/keydocs/2006/0628/Oil__Gas_Profile_Change_Reques.doc
Oil & Gas New Profile Request Existing Rules PUCT Rule: Sub Chapter F on Metering for section 25.131(e)(3) http://www.puc.state.tx.us/rules/subrules/electric/index.cfm ERCOT Protocols:Section 9.9, “Profile Development Cost Recovery Fee for a Non-ERCOT Sponsored Load Profile Segment” Load Profiling Guide:Section 12, “Request for Profile Segment Changes, Additions, or Removals” Profile Decision Tree:
Oil & Gas New Profile Request Proposed Pending Procedural Changes • New Profile ID Segment called “BUSOGFLT” for Business Oil and Gas Flat Profile. • CR would submit copy of the Sales Tax Exemption Certificate for the ESI ID which is on file with the CR. In addition, the CR will be required to provide ERCOT with a copy of a Customer Certification to the CR that the Customer holds an official Texas Railroad Commission Operator Number and uses electricity at the premises identified by the ESI ID for the purpose of exploring, producing or transporting oil and/or natural gas extracted from the earth.
Oil & Gas New Profile Request Proposed Pending Procedural Changes • ERCOT would communicate to TDSP the ESIIDs which need a profile change to BUSOGFLT as well as the list of approved CRs who are allowed to use the BUSOGFLT. • TDSPs are to execute Profile ID assignment changes in the same fashion as in the annual validation process. • TDSPs would monitor compliance that only appropriate CRs are using the BUSOGFLT profile per PUCT and Market Rules.
Oil & Gas New Profile Request Proposed Pending Procedural Changes • If the requestor is to be reimbursed per PUCT Rules and Protocols Section 9.9, then a CR wishing to use the BUSOGFLT profile shall have to pay for a share of the cost to develop this profile. Subsequent CRs using the profile would also pay a share until four(4) years have passed. ERCOT would not handle the payments between parties but would calculate the fee and maintain the CR approved list. • If a switch occurred on a premise with the BUSOGFLT profile and reimbursement is required but the new the CR does not wish to share in the reimbursement then the premise profile id assignment shall be changed from BUSOGFLT.
Oil & Gas New Profile Request Proposed Pending Procedural Changes • The BUSOGFLT profile follows the premise after a switch unless previous item 7 • ERCOT during quarterly validations would monitor compliance of the BUSOGFLT assigned premises with the approved CR list and approved premise list and communicate appropriately.
Oil & Gas New Profile Request Impacts • UFE improvement due to the segment shape of Oil and Gas aggregate population on a more appropriate profile shape. • ERCOT, TDSP and CRs would need to add BUSOGFLT code to their systems. (No TxSet impact) • TDSP would need a process to implement PUCT Rule. • ERCOT settlement would need to add the new shape. • CR shadow settlement and forecasting systems would need to handle the new shape. • ERCOT would be required to implement a quality assurance methodology as outlined in the ERCOT recommendation
Oil & Gas New Profile Request Estimated Implementation Timeline • Depends on Market Approval Process. • Assuming LPGRR and Profile Decision Tree approvals by December 2006 and following 150 day market notice, possible implementation in May 2007. Otherwise probably the Fall of 2007.
Oil & Gas New Profile Request VOTE Motion That COPS recommend to the TAC approval of Oil & Gas New Profile Request Upon approval, the PWG will submit LPGRR and Profile Decision Tree changes required for implementation