1 / 21

High Density Cooling

High Density Cooling. Air conditioning for high density applications. Coolblade: chilled water in-row cooler 16&27kW. Coolmate: chilled water pumping module & hydraulic splitter 90&160kW. High Density Cooling.

adonai
Download Presentation

High Density Cooling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. High Density Cooling Air conditioning for high density applications Coolblade: chilled water in-row cooler 16&27kW Coolmate: chilled water pumping module & hydraulic splitter 90&160kW

  2. High Density Cooling The increase in heat removal requirements makes it necessary to adopt different stategies for datacenter cooling

  3. High Density Cooling It may be necessary to reject more than 30 kW of heat from a single rack

  4. High Density Cooling Typical datacenter arrangement: hot aisle – cold aisle with perimetral cooling One perforated tile of the raised floor will hardly deliver more than a few kW of cooling

  5. High Density Cooling In-row cooling: hot air is treated “on the spot” Air flow & cooling capacity and are greater than with a raised floor

  6. High Density Cooling Preferred application High density racks in a hot or cold aisle containment, with or without perimetral cooling in mixed high density-low density situations

  7. High Density Cooling System operation and layout water out 18°C water in 13°C water out 12°C water in 7°C Coolmate will supply controlled temperature water to avoid condensation Coolblade units will modulate fan speed according to actual heat load from the racks

  8. High Density Cooling Coolblade: main features Galvanized sheet metal frame and panels, epoxy-polyester powder coated outside, A2 class insulating foam inside Mounting feet with wheels

  9. High Density Cooling Coolblade: main features Variable speed diagonal fans G2 pleated air filter (EN779)

  10. High Density Cooling Coolblade: main features High efficiency aluminium fin, copper tube water coil Dual circuit coil (model size 30)

  11. High Density Cooling Coolblade: main features Upper & Lower hydraulic connections Stainless steel condensate tray

  12. High Density Cooling Coolblade: main features Loss of air flow, dirty filter and water leakage detectors

  13. High Density Cooling Coolblade: main features 230V/1ph/50Hz dual power inlet IEC320 with manual switch Microprocessor control with LCD display

  14. High Density Cooling Coolblade: options Condensate pump Lack of water detector BMS communication cards

  15. High Density Cooling Coolmate: main features Self-supporting galvanized sheet metal structure epoxy-polyester powder coated outside A2 class insulating foam inside

  16. High Density Cooling Coolmate: main features Hydraulic connections on the bottom Brazed plate heat exchanger Dual water pump

  17. High Density Cooling Coolmate: main features 0-10V servo controlled water valve Ambient T°C/h% sensor

  18. High Density Cooling Coolmate: main features Outlet water temperature sensor Microprocessor control with LCD display

  19. High Density Cooling Coolmate: options control valve on primary circuit 2-way control valve on primary circuit

  20. Options b Flow switch on secondary (a) or primary (b) circuit (excluded with 2-way water valve) a Hydraulic connections on the top

  21. THANKS FOR YOUR ATTENTION

More Related