1 / 20

Metal lab. equipment

Metal lab. equipment. Metal lab. equipment. Manual press for load tranducers calibration It’s possible check and calibrate until a >200 KN load. Hardness tester Ergotest DG25/R It’s possible to check hardness in Brinnel and Rockwell scale. Date of expiry calibration 08/11/2013.

alice
Download Presentation

Metal lab. equipment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Metal lab. equipment

  2. Metal lab. equipment Manual press for load tranducers calibration It’s possible check and calibrate until a >200 KN load. Hardness tester Ergotest DG25/R It’s possible to check hardness in Brinnel and Rockwell scale. Date of expiry calibration 08/11/2013

  3. Metal lab. equipment Stereo microscope MZ75 Leica. For macro investigations, failure analysis or defect searching. (x1,6 @ x100 degrees).Connected to PC for live observation) Date of expiry calibration 17/10/2013 Microhardness tester WMHT-MOT Leica (x100 – x500 – x1000 degrees) Hardness HV with indentation. Value on display and software for hardness calculation. Date of expiry calibration 16/09/2013

  4. Metal lab. equipment Sample test preparation area for micro hardness analysis. Cutting –off machine for sample test preparation

  5. Metal lab. equipment Spectrophotometer for check the chemical composition. It’s possible to analyze steel, cast iron and alluminium until 32 elements. Date of expiry calibration 20/09/2013 Persoz pendulum Elcometer. For verify the painting hardness. Date of expiry calibration 13/08/2018

  6. Testing

  7. Testing PROPRIETARY RIGHTS Ocap Corporation claims proprietary rights to the information in this document. This document is not to be reproduced, disclosed to a third party or used in the manufacture of any product without the written permission of the Chief Engineer of Ocap. TESTING EQUIPMENT: OCAP testing equipment is so composed: TEST BENCHED MTS160 fatigue bench test MTS50 fatigue test bench 329 MTS road simulator 4 D.O.F. Wear-Fatigue bench Bossotti (Made internally from OCAP) Wear bench Renault (Made internally from OCAP) Mud test bench (Made internally from OCAP) MTS four axis ball joint test system connected with an environmental chamber Angelantoni Wear test bench for heavy applications (Made internally from OCAP). Fatigue test for heavy applications (Made internally from OCAP). INSTRUMENTATIONS OF MEASURING Measuring press (Made internally from OCAP) Axial and Radial lash measuring bench (Made internally from OCAP) Axial and Radial lash measuring bench for heavy applications (Made internally from OCAP).

  8. Testing MTS160 fatigue bench test This test bench is a servo-hydraulic cylinder MTS160 which applies a push-pull radial action on the part. (0 - 160 KN) The load and all other parameters are checked via digital controller (Flex Test GT). To specific request of the customer, in the mean time the holder rotates moved by the cylinder on top on the device.  Load transducer + LVDT MTS661.22D.01 – date of expiry calibration 04/07/2014

  9. Testing MTS50 fatigue bench test This test bench is a servo-hydraulic cylinder MTS50 which applies a push-pull radial action on the part. (0 - 50 KN) The load and all other parameters are checked via digital controller (Flex Test GT). To specific request of the customer, in the mean time the holder rotates moved by the cylinder on top on the device. Load transducer + LVDT MTS661.22F.02 – date of expiry calibration 04/07/2014.

  10. Testing 329 MTS road simulator 4 D.O.F. This test bench is a Spindle couple road simulation System (Corner). The load and all other parameters are checked via digital controller (Flex Test GT). Date of expiry calibration for all the System is 04/07/2014

  11. Testing Wear-Fatigue bench Bossotti This test bench is a hybrid system between fatigue and wear test. Made internally by OCAP. It is composed from a double effect hydraulic cylinder and two rotating seat. On this cylinder was fixed also a load cell used to control the load previewed in the test. The force is checked on the display connected with the load cell. Load transducer U2B 0 - 200 KN – code H 54964 – date of expiry calibration 18/03/2013 Amplifier HBM – type MVD – I.D. code “ B ” – date of expiry calibration 18/01/2013.

  12. Testing Wear bench Renault This is a Wear test bench .Made internally by OCAP. Load transducer HBM – type U2A – I.D. code K09462 – date of expiry calibration 30/03/2013. Load transducer HBM – type U2A – I.D. code K09456 – date of expiry calibration 30/03/2013. Amplifier HBM – type MGC PLUS – I.D. code 014249 – date of expiry calibration 30/06/2013. Displacement transducer HBM – type WA50 – I.D. code 052310093 – date of expiry calibration 02/05/2013. Displacement transducer HBM – type WA20 – I.D. code 041550013 – date of expiry calibration 02/05/2013

  13. Testing Mud test bench This bench is internally made by OCAP. It’s possible to check the mud resistance of the parts with with the addition of mud (kaolin) or another kind of mud, based on the requirements or specifications of the customer.

  14. Testing MTS four axis ball joint test system connected with an environmental chamber Angelantoni MTS four axis ball joint test system able to apply the forces and the movements according to the specifications. The system applies simultaneous axial, radial load and rotational, oscillatory movements to the single ball joint specimen.

  15. Testing MTS four axis ball joint test system connected with an environmental chamber Angelantoni Vertical and lateral loads are applied to the specimen with MTS actuators, while rotational and oscillatory motions are realized with MTS actuators plus integrated LVDT sensors, in order to obtain accurate displacement measurements. Coordinated load control in the vertical and lateral axes combined with displacement control of oscillation and rotation actuators provide to manage a correct test. The system functions are checked via a powerful digital controller (Flex Test GT). In the rig is also applied an environmental chamber able easy change the test temperature. Date of expiry calibration for all the System is 04/07/2014

  16. Testing Wear test bench for heavy applications This test bench (made internally by OCAP) is composed by a double effect hydraulic cylinder. On this cylinder was fixed also a load cell used to control the load previewed in the test. The force is checked on the display connected with the load cell. The oil feed has been provided through an external supply, whose capacity was able to give a constant flow, at the bars needed for obtain the right force. Load transducer U2B 0 - 200 KN – code 733791 – date of expiry calibration 18/03/2013 Load transducer U2B 0 - 200 KN – code 050530083 – date of expiry calibration 18/03/2013 Amplifier HBM – type MGC PLUS code 007017 – date of expiry calibration 18/10/2013.

  17. Testing Fatigue test for heavy applications This test bench (made internally by OCAP) reproducing the operation condition and in the other side the ball pin was fixed with a double effect hydraulic cylinder. On this cylinder was fixed also a load cell used to control the load previewed in the test. The force is checked on the display connected with the load cell. The oil feed has been provided through an external supply, whose capacity was able to give a constant flow, at the bars needed for obtain the right force. Load transducer U2B 0 - 200 KN – code 050530083 – date of expiry calibration 18/03/2013 Load transducer U2B 0 - 200 KN – code H-J- 70091 – date of expiry calibration 18/03/2013 Amplifier HBM – type MGC PLUS code H-J- 82862– date of expiry calibration 18/10/2013.

  18. Testing Measuring press The press (made internally by OCAP) with a hydraulic cylinder, apply the force and check via load transducer. It is use for check axial or radial lash and pull out or extraction of components of parts. The measuring chain used for check the load is composed by: Load transducer HBM – type U3 (100 kN) – I.D. code 053310395 – date of expiry calibration 18/01/2013 Amplifier HBM – type MVD – I.D. code “ C ” – date of expiry calibration 18/01/2013.

  19. Testing Axial and Radial lash measuring bench This is a measuring bench (made internally by OCAP) with an pneumatic cylinder, for apply the force and checked via transducer. During the test we record the axial lash reached with a connected software/pc. The measuring chain used for check the load is composed by: Transducer HBM (0 – 20) mm WA 062110305 – date of expiry calibration 11/04/2013 Amplifier HBM MGC Plus 014249 – date of expiry calibration 13/03/2013.

  20. Testing Axial and Radial lash measuring bench for heavy applications This is a measuring bench (made internally by OCAP) with an pneumatic cylinder, for apply the force and checked via transducer. During the test we record the axial lash reached with a connected software/pc. The measuring chain used for check the load is composed by: Transducer HBM (0 – 20) mm 103710366– date of expiry calibration 11/04/2013 Amplifier HBM MGC Plus 014249 – date of expiry calibration 13/03/2013

More Related