1 / 16

Demonstrating the emittance-momentum matrix Mark Rayner, CM26 California, 24 March 2010

Initial 4D e N (mm). Diffuser. 3. 6. 10. Cooling channel. D1. D2. Q1. Q2. Q3. Q4. Q5. Q6. Q7. Q8. Q9. DK sol. Target. Absorber p z (MeV/c). 140. GVA1. BPM1. TOF0. TOF1. 200. 240. 1. 2. t. a , b. Diffuser. e.

amethyst-cabrera
Download Presentation

Demonstrating the emittance-momentum matrix Mark Rayner, CM26 California, 24 March 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Initial 4D eN (mm) Diffuser 3 6 10 Cooling channel D1 D2 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 DK sol Target Absorber pz (MeV/c) 140 GVA1 BPM1 TOF0 TOF1 200 240 1 2 t a, b Diffuser e Demonstrating the emittance-momentum matrixMark Rayner, CM26 California, 24 March 2010 Beam line characterization with the TOFs

  2. Introduction • Purpose of the beam line: • Generate the emittance-momentum matrix elements in pion  muon decay beam lines • (3, 6, 10) mm Ä (140, 200, 240) MeV/c • Data taking in December • 6 mm – 200 MeV/c element • Runs 1380 – 1393, Kevin Tilley’s optics, 6k target pulses • 6 mm – 140 MeV/c element • Runs 1409 – 1411, KT’s optics re-scaled to the new momentum, 2k target pulses • Phase space reconstruction by TOF0 and TOF1 • Longitudinal momentum resolution O(5 MeV/c) • Transverse position resolution O(2 cm) • Transverse momentum resolution O(pxmax/70) • Dependent on pxmax, the maximum un-scraped momentum of the optics in question • Comparison with Monte Carlo simulations • The 6-200 element has been simulated using G4BeamLine and G4MICE • This talk • Reconstruction algorithm • Distributions, means, covariance matrices, and emittances for 6-140 and 6-200 data • Analysis talk on Friday • What this means for future stages in MICE Beam line characterization with the TOFs

  3. Selection of the muon peak 6-200 Intermediate momentum 6-140 Beam line characterization with the TOFs

  4. Reconstruction procedure Track through through each quad, and calculate s»leff + dF + dD zTOF1 – zTOF0 = 8 m Assume the path length S»zTOF1 – zTOF0 Q5 Q6 Q7 Q8 Q9 TOF0 TOF1 Estimate the momentum p/E = S/Dt Add up the total path S = s7 + s8 + s9 + drifts Calculate the transfer matrix Deduce (x’, y’) at TOF0 from (x, y) at TOF1 Deduce (x’, y’) at TOF1 from (x, y) at TOF0 Beam line characterization with the TOFs

  5. Momentum reconstruction: 6-200 simulation Path length ! Measuring path length removes the bias on the momentum measurement Beam line characterization with the TOFs

  6. Simulation/data comparison at TOF1 (6-200 matrix element) Muon momentum Muon time of flight This simulation uses the geometry from before TOF1 was moved Dz = – 16.7 cm = – 0.56 ns / c Beam line characterization with the TOFs

  7. 6-140 (x, px, y, py, pz) in mm and MeV/c x RMS normalized phase emittance = 5.30 mm y RMS normalized phase emittance = 1.78 mm Transverse 4d RMS normalized phase emittance = 3.07 mm Covariance matrix 4296 -509.0 132.3 -20.37 5.77 4451 -5.34 1.32 168.8 15.13 -438.7 55.8 -7.03 13.65 1286 30.08 -8.49 14.085 0.136 212.8 Means Beam line characterization with the TOFs

  8. 6-200 (x, px, y, py, pz) in mm and MeV/c x RMS normalized phase emittance = 5.37 mm y RMS normalized phase emittance = 2.25 mm Transverse 4d RMS normalized phase emittance = 3.48 mm Covariance matrix 3359 -610.0 205.8 18.99 -17.68 3600 1.17 -1.61 82.3 17.43 -107.6 -5.0 -5.84 11.81 602 16.64 -12.09 15.311 -0.407 258.1 Means Beam line characterization with the TOFs

  9. Momentum Beam line characterization with the TOFs

  10. Horizontal phase space 3s fit Beam line characterization with the TOFs

  11. Vertical phase space Beam line characterization with the TOFs

  12. Horizontal spatial dispersion Beam line characterization with the TOFs

  13. Horizontal momentum dispersion Beam line characterization with the TOFs

  14. Vertical spatial dispersion Beam line characterization with the TOFs

  15. Vertical momentum dispersion Beam line characterization with the TOFs

  16. Conclusion • 6-200 element • Trace space beam properties required at TOF1 (6-200) • <pz> = 261.8 MeV/c, ex = 2.55 mm, ey = 1.12 mm, and 4D eN = 1.69 mm • Takes into account binning effects • Trace space beam properties measured at TOF1 (6-200) • <pz> = 258.1 MeV/c, ex = 2.31 mm, ey = 0.93 mm, and 4D eN = 1.47 mm • Phase space beam properties measured at TOF1 (6-200) • <pz> = 258.6 MeV/c, ex = 5.37 mm, ey = 2.25 mm, and 4D eN = 3.48 mm • Phase space beam properties measured at TOF1 (6-140) • <pz> = 212.8 MeV/c, ex = 5.30 mm, ey = 1.78 mm, and 4D eN = 3.07 mm • Analysis talk on Friday • Simulation: how would these beams behave in Stage 6? • What about time? • Suggestion for the future data shifts • Observe >40k muons (~6k target pulses?) for each of the nine elements • Kevin Tilley’s re-scaled 6-200 optics • Optics derived from Marco’s genetic algorithm Beam line characterization with the TOFs

More Related