80 likes | 130 Views
Renowned as a reseller of quality air-conditioning, heating, refrigeration and ventilation equipments, now we are offering high-quality and commercial purposed White-Rodger gal valves for worldwide sale. Contact us today to order our products at your doorstep. For more details check our website. <br>https://acpartsdistributors.com/
E N D
AC PartsDistributors https://acpartsdistributors.com/
How to Replace White-Rodgers Gas Valve in a HVAC System? • It is important to regularly inspect the working condition of oil and gas heating furnaces in a HVAC system to finding out whether or not the White-Rodgers gas valve, control knobs and other parts are in good and working condition. Proper maintenance of these parts allows efficient use of energy and prevents the appliance from being a potential health hazard. Repair any parts in the HVAC system as quickly as possible if they are damaged or faulty. • Some of the indications that the White-Rodgers gas valve might not be working properly include: poor production of heat – it can be too much or little, HVAC system doesn’t work properly, continuous flickering or appearance of too much noise in the HVAC system. Any of these conditions call for inspection and repair of the source problem in the HVAC system.
Get Necessary Tools and Equipment • Get the White-Rodgers gas valve of exact model you need. There are different designs, size and shape; so, confirm the model of the equipment from the old one and get an exact replacement from ac parts manufacturer or supplier. It is important to find an exact match because it provides a perfect fit for the HVAC system. This prevents leakage in the system.
Turn Off Power & Gas Supply • Locate the White-Rodgers gas valve’s gas control knob and turn it off after disconnecting the power supply. Find the gas control valve and switch it off as well. It prevents gas from leaking while replacing the old White-Rodgers gas valve with the new one. Don’t proceed until the room is clear of gas, if there is a strong smell of gas in the house then call a professional to correct the problem.
Remove the Old White-Rodgers Gas Control Valve • Use a pipe wrench to unscrew the old equipment from the HVAC system. Be careful not to damage gas supply pipes. Screw drivers or pliers can also be used. Use gentle, but firm movements until the old White-Rodgers gas valve is loose enough, use your hands to dismount the equipment from the system.
Make a Replacement • Take the new White-Rodgers gas valve control and fix it using pliers or pipe wrenches. Watch out so that the pipes are not twisted or folded while fastening the equipment. Make sure that it is fast enough and secure so as to allow efficient flow of gas. Check that the control valve doesn’t leak gas as well.
Easy Guidelines to White-Rodgers Gas Valve Replacement • Shut off gas to water heater • Shut off water at cold water inlet • Connect hose to heater drain cock. Drain water to a nearby drain. Open a hot water faucet for faster draining • Disconnect gas line at union. Remove piping from old control • Disconnect the thermocouple, pilot burner, and the main burner • Remove the control by turning it counterclockwise. If needed, a short piece of ½” black iron pipe can be screwed into the control inlet to increase leverage • Install White-Rodgers gas valve in reverse order
Need help of professionals? Contact AC Parts Distributors. They are available with the right White-Rodgers gas valves and can effectively install it into your system via replacement. Get in touch! AC Parts Distributors, Inc. PO Box 915919, Longwood, FL 32791-5919 Main: (877) 679-6400 Local: (321) 396-5208 Fax: (407) 703-3915 Email: CONTACT@ACPARTSDISTRIBUTORS.COM Website: www.acpartsdistributors.com