1 / 9

Bituminous Stabilized Materials: Structural Design and Materials Classification

Bituminous Stabilized Materials: Structural Design and Materials Classification. RPF November 2007 Fenella Long. Today’s Presentation. Demonstrate the software for Pavement design method Materials classification method Review process. Software. www.bitstab.roadrehab.com

baruch
Download Presentation

Bituminous Stabilized Materials: Structural Design and Materials Classification

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bituminous Stabilized Materials:Structural Design and Materials Classification RPF November 2007 Fenella Long

  2. Today’s Presentation • Demonstrate the software for • Pavement design method • Materials classification method • Review process

  3. Software • www.bitstab.roadrehab.com • Software runs on website • Background info • Descriptions • Download backup reports

  4. Example

  5. Materials Classification • Rational and consistent method of assigning materials to a class • Example

  6. Review Process • Need industry representatives to review – YES YOU • Structural design method • Approach to material classification • Material class limits • “Reasonableness” of results

  7. 6. Calculate Layer ELTS Values ELTS = 450 BCF = 0.7 150 mm BSM2 MR = 2, EMax = 450 ELTS = 400 Thickness Adj = 0.4 200 mm C4 MR = 3, EMax = 400 ELTS = min(212,180) ELTS = 180 180 mm G6 MR = 1.8, EMax = 180 118 MPa 118 MPa 150 mm G7 6. ELTS = min (Esupport * MR , Emax) Example, Moderate Region 5. Assign modular ratio’s and max stiffness 1. Material Classes CBR 7-15% 2. Determine subgrade stiffness (140 MPa) 3. Adjust for climate (126 MPa) 4. Adjust for cover (118 MPa) 7. Layer PN = thickness * ELTS 8. PN =  layer PN

  8. Relative certainty that material is a G2, based on this test Median Value 90th Percentile Value 10th Percentile Value Assigning Material Class Confidence for Specific Indicators G2 G3 G4 e.g. DCP

More Related