1 / 17

Mechanics and Cooling Systems for the CBM STS

Mechanics and Cooling Systems for the CBM STS. CONTENT Si detector’s plates Module of detector Carbon fiber frame Detector’s plates holder 5. Ladder support system 6. The parts of cooling system 7. Arrangement of detectors plates on a ladder

benita
Download Presentation

Mechanics and Cooling Systems for the CBM STS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mechanics and Cooling Systems for the CBM STS • CONTENT • Si detector’s plates • Module of detector • Carbon fiber frame • Detector’s plates holder • 5. Ladder support system • 6. The parts of cooling system • 7. Arrangement of detectors plates on a ladder • 8. Typical construction of the ladder • 9. Construction of STS station Nr 4 • 10. Tilling and distances between sensors • 11. Ladders installation and fixation SAINT-PETERSBURG STATE UNIVERSITY S.Igolkin , e-mail Igolkin @hiex.phys.spbu.ru Serguei.Igolkine@cern.ch Dubna , Russia October, 2008

  2. Installation of Si detectors is offered to Carbon fiber space structure - Frame Similar structures have been successful used at creation design Of Inner Trecker System ITS of experiment ALICE Such space CF Frames have the best parities weight-rigidity and allow to create on their basis the finished assembly of detectors Ladders, including: • Hybrids ( silicon detectors or modules of detectors with cables and plates of end electronic - Basic fixing elements - Cooling system of plates of end electronics

  3. Detector’s module Detector’s module 32 E

  4. Carbon fiber frame Material: CF prepreg M55J/ 334EU Moduls of composit 27000Gpa

  5. Detector’s plates holder Materials: Fiber glass (E-glass + epoxy glue )

  6. Ladders support system Each end of ladder have a final support. Final support consist of: some plate with precise basis elements (surfaces) and two prism’s Assemblage of end support’s and frame perform on the assembly jig at the same time with detectors holders. The precise of assembly jig ensure precise disposition the all elements of ladder

  7. The parts of cooling system The parts of cooling system Coolant fluid

  8. Arrangement of detector’s plates on a ladder Option 1 - fixationdetects plates in parallel of horizontal plane inchess order - Provide compact configuration but demands are bend of the cables • Option 2 – fixation of detectors plats under • an inclination • Provide compact configuration and don’t • demands are bend of the cables, but • not conveniently for installation. Option 3 – fixation detectors platesin parallel Of the horizontal plane, each detector shifting in parallel in one direction. - Provide easy installation, but demands more place and increases zones of overlapping between ladders

  9. Typical construction of the ladder

  10. The position of detectors for Station 4 • The position of Si detectors plates from centre: • 22x62 + 42x62 + 62x62 + [62x62]x3 • 2/3/4 - 42x62 +62x62 + [62x62]x3 • 62x62 + [62x62]x3 • 6 [62x62]x3 As we see, each subsequent ladder it turns out by exceptions of the central plates of detector 1 2 3 4 5 6

  11. The length of the ladders for ST 4 Length of the ladder from centre to periphery of station decrease proportionally 40mm i.e. to a step of the carbon frame, but the length of the cables in the hybrids are kept. Nr 1 Nr 2, 3, 4 Nr 5 Nr 6

  12. Construction of STS station Nr 4 The station consist of 4 frames. On each are fixed 3 ladder’s with detectors. The frames with ladders are fixed on the slides of main support of STS

  13. Tilling and distance between sensors

  14. Ladder’s installation and fixation

  15. Schematic fixation of frames on the main support STS Some slides for ladder’s frame are fixed on the main support of STS . The frames with ladders are positioned on the slide : for top support - ball on plane with flat springs for down support – ball on prism

  16. The main current tasks 1. Определить и описать параметры тепловых потерь и провести предварительные расчёты условий обеспечения температурного режим эксплуатации кремниевых детекторов, Рабочая температура на плоскости детектора (-5грС) +/- Рабочая температура в объёме детектора……+/-….. Рабочая температура платы электроники гибридов …..не более Время непрерывной работы детектора (длительность сеанса)…….. Для предварительных расчётов можно использовать следующие данные: - Наиболее нагруженная зона - центральная зона плоскости станции, в частности детектор 22х62мм (J=100мка/см2 U=300V ) - Тепловыделения на остальных пластинах детекторов уменьшаются от центра к периферии пропорционально радиационной нагрузке. - Тепловые потери на плате электроники гибрида 2W - Тепловые потери в кабелях отсутствуют В качестве хладогента для воздушного охлаждения использовать инертный осушенный газ (азот, гелий ?), для жидкостного охлаждения фреон. 2. Провести оптимизационные расчёты по механике углепластиковой фермы исходя из предложенных размеров и параметров материала. 3. Предложить концепцию системы охлаждения с учётом результатов предварительных расчётов

More Related