1 / 12

EFI Block Diagram

EFI Block Diagram. A High-Input Impedance Low-Noise Voltmeter in Space. sheath. sensor. preamp. Floating ground generation. BIAS. USHER. Bias channels. GUARD. VBraidCtrl. VBraid. BRAID. Vref. Top-Level Design (1). Diagram of THEMIS EFI Elements. AXB. Preamp Enclosure.

benniea
Download Presentation

EFI Block Diagram

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EFI Block Diagram • A High-Input Impedance Low-Noise Voltmeter in Space sheath sensor preamp Floating ground generation BIAS USHER Bias channels GUARD VBraidCtrl VBraid BRAID Vref

  2. Top-Level Design (1) • Diagram of THEMIS EFI Elements AXB Preamp Enclosure Preamp PWB BEB SPB DFB GSE

  3. Top-Level Design (2) • Description of THEMIS EFI Elements • Three-axis E-field measurement, drawing on 30 years of mechanical and electrical design heritage at UCBSSL. • Closest living relatives are Cluster, Polar and FAST, with parts heritage from CRRES (mechanical systems, BEB designs, preamp designs).

  4. Top-Level Design (3) • Description of THEMIS EFI Elements • Radial booms: • 22-m cable length (up to 50 m tip-to-tip deployed; SPB-X to be deployed to 50 m, SPB-Y to be deployed to 40 m). • 8-cm dia., Ti-N-coated spherical sensor. • 3-m, 0.009-inch dia. fine wire to preamp enclosure. • SMA-actuated door release mechanism. • Brushed motor design. • Significant volume and mass relief relative to closest living relatives. • USHER and GUARD bias surfaces integral to preamp enclosure. • BRAID bias surface of 3-m length inboard of preamp (common between all 4 radial booms). • Sensor is grounded through 10 Mohm resistance when stowed, providing ESD protection and allowing for internal DC and AC functional tests. • External test/safe plug (motor,door actuator,turns click, ACTEST) to allow for deploy testing/safeing and external signal injection.

  5. Top-Level Design (4) • Description of THEMIS EFI Elements • Axial booms: • 2.8-m stacer with ~1-m DAG-213-coated whip stacer sensor. • New, fully-qualified Double DAD design based on FAST axial booms. • New, fully-qualified FrangiBolt deployment actuation. • Preamp mounted in-line, between stacer and sensor. • USHER and GUARD bias surfaces integral to preamp enclosure. • No BRAID bias surface. • Sensor is grounded through 7 Mohm resistance when stowed, providing ESD protection and allowing for internal DC and AC functional tests. • External test/safe plug (deploy actuator, ACTEST) to allow for deploy testing/safeing and external signal injection.

  6. Top-Level Design (5) Description of THEMIS EFI Elements • BEB block diagram:

  7. Top-Level Design (6) • Description of THEMIS EFI Elements • BEB Signal Processing and Control Specifications:

  8. Top-Level Design (7) Description of THEMIS EFI Elements • DFB functional block diagram:

  9. Top-Level Design (8) Description of THEMIS EFI Elements • DFB signal flow block diagram:

  10. Top-Level Design (9) • Description of THEMIS EFI Elements • DFB Signal Processing and Control Requirements: • +/- 100 V analog input relative to AGND. • CMRR >= 80 dB on differential E-Field channels. • DC-coupled E-fields and sensor potential waveforms from 0-4 kHz. • AC-coupled E-fields from 0-6 kHz. • AC-coupled SCM (AC B-field) from 0-4 kHz. • Log(AKR POWER) from 100-500 kHz. • E-field and sensor potentials for on-board Spin Fit data processing. • Filter bank with df/f better than 25% from 8 Hz to 4 kHz. • On-board projection of E and dB into ExB/E.B coordinates for FFT processing (“Derived Quantities”). • On-board computation of FFT spectra (Standard and Derived Quantities).

  11. Top-Level Design (10) • Performance Specification • Spacecraft potential: +/- 60 V, 1.8 mV resolution, better than 46 uV/m resolution (allows ground reconstruction of E from spacecraft potential to better than 0.1 mV/m resolution). • DC-coupled E-field: +/- 300 mV/m, 9 uV/m resolution, 0-4 kHz. • AC-coupled E-field: +/- 50 mV/m, 3.0 uV/m resolution, 0-6 kHz. • AKR log(Power) channel: 1 uV/m to 4.5 mV/m RMS amplitude, 400-kHz bandwidth, 100-500 kHz. • 16-bit resolution.

  12. Top-Level Design (11) • Thermal Predicts: 60-min-long eclipse 180-min-long eclipse

More Related