1 / 36

ECCB 2020 Gent Introduction to protein structure validation (and improvement) Gert Vriend

Protein structure validation. ECCB 2020 Gent Introduction to protein structure validation (and improvement) Gert Vriend. Protein structure validation.

cborkowski
Download Presentation

ECCB 2020 Gent Introduction to protein structure validation (and improvement) Gert Vriend

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Protein structure validation ECCB 2020 GentIntroduction to protein structure validation(and improvement)Gert Vriend

  2. Protein structure validation The plan for today:Gert Vriend: Introduction to validationRobbie Joosten: X-ray structure validation and improvementJurgen Doreleijers: NMR structure validation (and improvement )Bas Vroling (and you): YASARAAll (and you): General validation practicalsSplit-up in groups: General validation issues X-ray specific issues NMR specific issues Continuation of validation practicalsAt the end: Overview of validation and related facilitiesAnd in-between we have coffee, lunch, tea, and whatever else they throw at us at any moment that anybody feels like it.

  3. Structure validation Everything that can go wrong, will go wrong, especially with things as complicated as protein structures.

  4. What is real?

  5. What is real? ATOM 1 N LEU 1 -15.159 11.595 27.068 1.00 18.46 ATOM 2 CA LEU 1 -14.294 10.672 26.323 1.00 9.92 ATOM 3 C LEU 1 -14.694 9.210 26.499 1.00 12.20 ATOM 4 O LEU 1 -14.350 8.577 27.502 1.00 13.43 ATOM 5 CB LEU 1 -12.829 10.836 26.772 1.00 13.48 ATOM 6 CG LEU 1 -11.745 10.348 25.834 1.00 15.93 ATOM 7 CD1 LEU 1 -11.895 11.027 24.495 1.00 13.12 ATOM 8 CD2 LEU 1 -10.378 10.636 26.402 1.00 15.12

  6. X-ray

  7. X-ray

  8. X-ray And now move the atoms around till the calculated reflections best match the observed ones. ‘FFT-inv’ FFT-inv

  9. X-ray refinement / multiple minima Multiple minima

  10. X-ray R-factor 2 Error = Σ w.(obs-calc) R-factor = Σ w.|obs-calc|

  11. X-ray resolution

  12. NMR data collection

  13. NMR data NMR data consists of short inter-atomic distances between atoms. We call these NOEs. Most NOEs are between close neighbours in the sequence. Those hold little information. The ‘good’ NOEs are between atoms far away in the sequence. There are few of those, normally. NOEs are known with low precision. E.g. NOEs are binned 2.5-4.0, 4.0-5.5, and 5.5-7.0. NMR can also measure some angles, and relative orientations. The latter, called RDCs are powerful.

  14. NMR Q-factor 2 Error = Σ NOE/RDC-violations + Energy term

  15. NMR versus X-ray With X-ray you measure reflections. Each reflection holds information about each atom. With NMR you measure pair-wise distances, angles, and orientations. These all hold local information. X-ray requires crystals, and crystals cause/are artefacts. NMR is in solution, but provides much less precision.

  16. NMR versus X-ray NMR X-ray ‘Error’ 1-2 Å 0.1-0.5 Å Mobility yes not really Crystal artefacts no yes Material needed 20 mg 1 mg Cost of hardware 4 M Euro near infinite (share) Drug design no almost Better combine and use the best of both worlds.

  17. Why validation ? Why does a sane (?) human being spend twenty years to search for millions of errors in the PDB?

  18. Validation because: Everything we know about proteins comes from PDB files. Errors become less dangerous when you know about them. And, going back to the red thread through this series, if a template is wrong the model will be wrong.

  19. What kind of errors can the software find? Administrative errors. Crystal-specific errors. NMR-specific errors. Really wrong things. Improbable things. Things worth looking at. Ad hoc things.

  20. Smile or cry? A 5RXN 1.2 B 7GPB 2.9 C 1DLP 3.3 D 1BIW 2.5

  21. Why? Simple, proteins are very complex.

  22. X-ray specific

  23. Little things hurt big

  24. X-ray How bad is bad?

  25. A force field is a set of parameters together with a set of rules to use those parameters to see how normal something is. Most force fields are designed to score events, or to predict the future. In structure validation we often look at structures and count ‘things’ For example, we count that the number of buried hydrogen bond donors that do not make a hydrogen bond is 4.6+/-1.2 per 100 amino acids in well-solved proteins. So we call that normal, and now, using ΔG=-RTln(K), we can calculate the energy penalty for proteins with more than 4.6 unsatisfied buried unsatisfied hydrogen bonds. Check with force fields

  26. Contact Probability

  27. Contact Probability

  28. Contact probability box

  29. One slide about homology modelling

  30. His, Asn, Gln ‘flips’

  31. Hydrogen bond network

  32. Your best check:

  33. How difficult can it be? 1CBQ 2.2 A

  34. How difficult can it be?

  35. Errors or discoveries? Buried histidine. Warning for buried histidine triggered biochemical follow -up and new mechanism for KH-module of Vigilin. (A. Pastore, 1VIG).

  36. Acknowledgements: Rob Hooft Elmar Krieger Sander Nabuurs Chris Spronk Maarten Hekkelman Robbie Joosten

More Related