1 / 6

Signal Sampling and FFT

Signal Sampling and FFT.

ciara-palmer
Download Presentation

Signal Sampling and FFT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Signal Sampling and FFT • Problem:A measured signal in time domain and its amplitude frequency spectra are schematically represented on Figs.1 and 2. The signal is measured N=64 times after every d t=0.002 sec, the time resolution period. The Fourier transform of the signal is represented on Fig.2 with the corresponding frequency resolution df. • (a) What is the minimum (fmin), maximum (fmax) and the spike-frequency (fspike) on Fig.2 that could be properly measured in Hertz (Hz) under the above conditions? • (b) If two of the above signal’s periodics have frequencies of 100 Hz, and 250 Hz, will they be measured (detected) in any way (even distorted) under the above measurement conditions. If so can you identify (mark) any of these periodics on Fig. 1 or Fig. 2. • (c) What should be specifically changed during the measurements of the signal in order to detect tree times larger frequency, i.e,fmax, NEW= 3fmax? • (d) Add (by overlapping on Figs.1 and 2 in the same scale as original sketches) the possible changes to newly measured signals due to changes in (c) above.

  2. Data Acquisition - DAQ • DAQ boards: • Analog I/O • Digital I/O • Counter/timer I/O • DAQ library supports all DAQ boards • LabVIEW uses the NI-DAQ driver-level software • Data Acquisition System Components COMPUTER with SOFTWARE:Control the DAQ board, process, store, and display data, as instructed by software program.Examples:LabVIEW application programs to acquire data, simulate instruments, and generate results, etc. SIGNAL CONDITIONING: Modify transducer signals to match DAQ board specs/ranges.Examples: amplification or attenuation, filtering, excitation, etc. PLUG-IN DAQ BOARD: Measures (acquires), processes, stores, and generates signals, as instructed by software program.Examples: Analog and digital signals’ input and output, counters, timers, etc. TRANSDUCERS: Sense the measured quantities and change their properties or generate corresponding electrical signals.Examples: strain gage, thermocouple, accelerometer, potentiometer, etc.

  3. Sampling, Minimum & Maximum/Nyquist Frequencies d d t f

  4. Sampling, Minimum & Maximum/Nyquist Frequencies - Solution

  5. Sampling, Minimum & Maximum/Nyquist Frequencies - Solution (2) fp2=2500 9fNyq 7fNyq fp1=1200 5fNyq 3fNyq fNyq=250 Fp2,al=0 Fp1,al=200

  6. What to do… to detect 3 times lager max. frequency? fNEW, if NNEW=N d d tNEW d d f t

More Related