1 / 13

PXD DAQ News

Stay updated with the latest topics discussed at the CDAQ meeting, including the connection of PXD DAQ to CDAQ and data transmission methods for improved efficiency. Explore key questions and test results related to Gigabit Ethernet connections and ATCA configurations.

danielsrussell
Download Presentation

PXD DAQ News

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PXD DAQ News S. Lange (Univ. Gießen)Belle II Trigger/DAQ Meeting (Jan 16-18, 2012, Hawaii, USA) Today: only topics important for CDAQ- GbE Connection to CDAQ - DATCON All other new discussions and results  Vienna PXD+SVD Workshop

  2. Connection of PXD DAQ (ATCA) to CDAQ (EVB #2)

  3. Send PXD data by GbE to CDAQ • Plan A: GbE by PowerPC (Linux) UDP or TCP/IP software • Plan B (only if plan A does not work) • GbE by optical link UDP hardware • GbE by siTCP TCP/IP hardware • Related questions: • do we need a GbE switch ARISTA 7500 ? (150kEuro)(see Yamagata-san‘s talk at Yugawara) • should ATCA do PXD subevent building, or not? • requires ATCA backplanediscouraged by PAC report • needs 3rd Ph.D. student (decision about BMBF application expected 06/2012) • [SVD+PXD] subevents required by GPU farm

  4. Compute Node Version #2 Virtex-4 FX60 Compute Node Version #3 Virtex-5 FX70T 1. Send GbE by PowerPC • Embedded PPC on Virtex-4 or -5 • 3% PXD occupancy = 540 MB/sfactor 3 reduction by HLTfactor 10 reduction by ATCA (design goal of algorithm)= 18 MB/s required • TCP/IP tested o.k.~26 MB/s achieved at IHEP on PPC405 on Virtex-4 (CN Vers. 1)(~22.5 MB/s in Giessen by Björn Spruck, CN Vers. 2)

  5. 2. Send GbE by optical link • Only necessary, if design reduction factor not achievable • Guest project at Giessen Greg Korcyl (Panda)2-3 weeks in August 20102-3 weeks in November 2010work continues in Krakow with a CN Vers. 2 • UDP • So far optical links, but copper GbE should be possiblework in progress • in any case, can be used asBonn  Giessen interface (DATCON sending SVD ROI to ATCA) • See next 2 slides:- test system- test results

  6. RJ45 optical Test System

  7. Test Results (report by G. Korcyl, 25.11.2011) • Sucessfully implemented and tested • DHCP address acquisition • Address based filtering • ARP discovery • Ping (just to check the status) • Stat: a module that sends a frame each few seconds with current statistics, (rx, tx, frames counters etc.) • DataRX: a module to receive detector datareceives all the frames sent to a given UDP port and stores the data to the CN memory • Loopback test (G. Korcyl and B. Spruck) • Packet sent from PC received by fpga logic • Data transferred to the CN memory • Application running on PPC gets notified that new has been stored in the memory • Application initiates the transmission of the data back to fpga logic • TX module of fpga constructs a packet and sends it back to the PC • Conclusions: • solution is working but for the moment is not stable (bytes get lost, garbage bytes appear etc.) • achieved rate at <60 MB/s

  8. 2. Send GbE by siTCP • Only necessary, if design reduction factor not achievable • FPGA TCP/IP firmware- supported by KEK (Tomohisa Uchida-san, Manobu Tanaka-san) many thanks for their help - licenses are commercial, 8000,- Yen per 1 MAC addr • Test by Thomas Geßler at KEK, 2 weeks in Dec 2011 • tested sucessfully on ML403 (Virtex-4 FX20) and CN Vers. 3 (Virtex-5 FX70T) • resources usage very small9% Slice Registers, 7% Slice LUTs, 9% BRAM • >100 MB/s achieved from CN3 to PC • disadvantage:only 1 connection open at a time generates overhead, if packets are send to different EVB receivers(open, send, acknowledge, close = 4 packets for 1 packet payload)-> principally only 1 EVB (fixed MAC addr)-> there is no advantage compared to UDPmost probably ruled out

  9. Proposal for Discussion: /40 /~10 ATCA EVB #2 No fixed MAC addr assignment RJ45 TCP/IP 1:1 MAC addr assignment RJ45 UDP • On PC: • UDP checking algorithm (package dropped?) • conversion from UDP to TCP/IP • - PXD subevent builder

  10. DATCONBonn System for SVD ROIJ. Dingfelder, C. Marinas, M. Schnell

  11. Data Concentrator: Concept and implementation • Data Concentrator (DatCon) for data reduction with an FPGA-based track finding algorithm • Input: 42 optical links with 1.5 Gbps line rate • Output: One Ethernet and two 6.25 Gbps high speed links • Hardware : 12 AMC cards in an ATCA shelf with 3 carrier boards

  12. Hardware solution and future plans • Custom protocol "BELLE II Link" for data transmission • Aurora protocol for internal high speed data routing • Multiplexer and Memory Management Unit for data collection and storage • "Fast Hough Transformation" or "cellular automaton" implemented in FPGA for track finding

  13. Mahalo.

More Related