1 / 41

SPL R&D and Potential Applications

SPL R&D and Potential Applications. R. Garoby for the SPL team*. O. Brunner, S. Calatroni, O. Capatina, E. Ciapala, F. Gerigk, E. Montesinos, V. Parma, K.M. Schirm, + I. Aviles Santillana **, R. Bonomi **, J. Chambrillon, P. Coelho Azevedo**, K. Liao, N. Valverde Alonso**.

feleti
Download Presentation

SPL R&D and Potential Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SPL R&D and Potential Applications R. Garoby for the SPL team* O. Brunner, S. Calatroni, O. Capatina, E. Ciapala, F. Gerigk, E. Montesinos, V. Parma, K.M. Schirm, + I. Aviles Santillana **, R. Bonomi **, J. Chambrillon, P. Coelho Azevedo**, K. Liao, N. Valverde Alonso** ** supported by ESS

  2. HP-SPL:R&D Management

  3. Resources • R & D for a High Power SPL formally supported at CERN in view of multiple future potential applications • ~1.7 MCHF and 6 FTEs / year • Collaboration with ESS • Fellows and procurement of klystron modulator for SM18 • French in-kind contribution • Tuners, Helium tanks, use of Saclay 704 MHz high power test place… • EC-supported programmes • EuCARD (WP10) • Development and test of beta=1 (CEA) and beta=0.65 (IN2P3) 5 cells cavities • CRISP (WP4) • Joint work with ESS and DESY • EC-supported manpower for upgrading and exploiting the SM18 test place • LAGUNA-LBNO • EC-supported fellow for studying proton drivers at CERN using LP- or HP-SPL • DOE-supported programme • BNL • Development and test of a b=1 cavity • SPL documentation in EDMS [ https://edms.cern.ch/nav/SLHC-000008 ] • SPL meetings in Indico [ http://indico.cern.ch/categoryDisplay.py?categId=1893 ]

  4. Organization (at CERN) Guideline «Project-like» structure aimedat meeting the objectives of the HP-SPL R&D: • Building and testing a prototype cryomodule with 4 cavities • Updating CERN infrastructure and competence in superconducting RF technology • Preparingsubmission of future subjects of R&D [design and construction of a full-size cryomodule, high power RF sources, HIPIMS (High Power Impulse Magnetron Sputtering)…] WorkUnits • Design, construction and test of the prototype cryomodule (Leader: V. Parma) • Components: Cryomodule, Cavities, RF items (Couplers, tuners, …), cryogenicsequipment… • Assembly (withadequatetools): cavities string in clean room, inclusion in cryomodule • Tests: cavities in vertical cryostat, assembledcryomodule in bunker. • Upgrade of the SM18 infrastructure (Leader: O. Brunner) • HP water rinsing system and upgraded clean roon • Cryogenics for efficient operationat 2K • High power RF at 704 MHz (klystron, modulator, high power distribution) • LowLevel RF and controls • SC RF cavitiestechnology (Leader: E. Ciapala) • Fabrication and processing • Test, diagnostics and analysis

  5. HP-SPL:Baseline Design Parameters

  6. HP-SPL: BeamCharacteristics Required for low loss in accumulator Ion species H− Output Energy 5 GeV Bunch Frequency 352.2 MHz Repetition Rate 50 Hz High speed chopper < 2 ns (rise & fall times) Required for muon production Required for flexibility and low loss in accumulator 2 ´ beam current Þ 2 ´ nb. of klystrons etc .

  7. HP-SPL: Block Diagram 110 m 0.73 GeV 0 m 0.16 GeV 291 m 2.5 GeV 500 m 5 GeV Medium b cryomodule High b cryomodules High b cryomodules Debunchers Ejection From Linac4 To HP-PS and/or Accumulator to EURISOL 9 x 6 b=0.65 cavities 13 x 8 b=1 cavities 11 x 8 b=1 cavities • Segmentedcryogenics / separatecryo-line / room temperaturequadrupoles: • Medium b (0.65) – 3 cavities / cryomodule • High b (1) – 8 cavities / cryomodule Low energy Intermediate energy High energy

  8. HP-SPL: Cavities & Cromodules Energy gain (MeV/m) Medium b cryomodule Energy range: 160 MeV – 732 MeV 5 cell cavities Geometrical b: 0.65 Maximum energy gain: 19.4 MeV/m 54 cavities (9 cryomodules) Length of medium b section: ~110.35 m 1 5 10 15 100 200 300 400 High b cryomodule Position (m) Energy range: 732 MeV – 5 GeV 5 cell cavities Geometrical b: 1 Maximum energy gain: 25 MeV/m 192 cavities (24 cryomodules) Length of high b section: ~360 m

  9. Status and Plans of R&D

  10. Cavities (1/4)

  11. Cavities (2/4)

  12. Cavities (3/4)

  13. Cavities (4/4)

  14. SPL coupler: requirements

  15. SPL coupler: 2 designs SPS-derived LHC-derived Ceramic window Doubled-wall tube Air cooling

  16. SPL coupler: test assembly • Four ‘vacuum lines’: • 4 cylindrical window couplers • 4 planar disk window couplers • 8 Double walled Tubes • 4 test boxes • DESY clean process assembly • (Jlab also proposed to help) • CERN LLRF measurements • CEA RF power tests • (BNL also proposed to help)

  17. SPL coupler: clean room assembly (DESY) • Test box assembly not easy because of specific surfaces roughness needed for helicoflex • Couplers assembly was also not easy because : • Couplers are heavy • Last connection has to be done manually • Ok for few prototypes, not for a large series

  18. SPL coupler: RF high power tests (CEA) • Tests started with cylindrical window couplers • Not baked out, static vacuum ~ 2 x 10 -7 mbar • Wanted to check RF • Size of the test box 250 mm x 600 mm • Helicoflex • Pulse mode process • Reached > 1MW – 25 Hz – 2 ms (limited by heating due to lack of Cu platting)

  19. Short cryomodule: the actors ESS/CERN Fellow ESS/CERN Fellow ESS/CERN Fellow ESS/CERN Fellow

  20. Short cryomodule: schematic layout Connection to cryo distribution line Technical Service Module End Module Cryo fill line (Y), top left Phase sep. Now suppressed Inter-cavity support CW transition Cavity additional support RF coupler, bottom left side Now suppressed 1.7% Slope (adjustable 0-2%)

  21. Short cryomodule: vacuum vessel • General concept and dimensions (not latest design) 1054 Transport,dressing and alignment frame SSS 1021 7400 CourtesyP.Duthil (IPNO) (views S.Rousselot, IPN-Orsay)

  22. Short cryomodule: technical service module Ph.Separator pot 4.5 K vapor generator reservoir (with elect.heater) Last cavity IC support CWT 50 K heat intercept DN80 gate valve (single valve) standard support CourtesyP.Duthil (IPNO) (views S.Rousselot, IPN-Orsay)

  23. LLRF underdevelopment D. Valuch

  24. Upgraded installation in SM18

  25. Short cryomodule: master schedule Preparation of SM18 infrastructure (cryogenics, RF, clean-room) Delivery of 704 MHz klystron and modulator Cavities production Cavities processing/RF testing RF couplers Clean room assembly of string Cryomodule (& assy tooling) design Cryomodule fabrication Cryomodule assembly Start cryomodule RF testing

  26. Related R & D Nb coating of Cu cavities, using the HIPIMS (High Power Impulse Magnetron Sputtering) technology • In collaboration with Sheffield Hallam University (UK). • Supported in the context of the construction of LHC spare cavities. • Potentially very attractive technology for the SPL (raw material cost, mechanical stiffness). • First results on low beta 704 MHz cavity: end 2012

  27. SPL Applicationsto Proton Drivers

  28. 50 GeV synchrotron-based proton driver • New High Power PS (30-50 GeV, 2MW beam power) using the Low Power SPL (LP-SPL) as injector. • FeasibilityStudybased on the work for SPL and PS2 supportedwithin the LAGUNA-LBNO DS. Long baseline experiment (2300 km) CERN-Pyhasalmi (Finland)

  29. PS2 parameters: reminder… 29

  30. PS2 integrationat CERN: reminder • “Straight” H- inj. line SPL  PS2 avoiding large bending radii to minimise Lorentz stripping of H-. • Minimum length of inj. line TT10  PS2 for ions and protons from PS complex. • Minimum length HE line PS2  SPS. SPS PS2 to SPS PS2 PS/LEIR to SPS / PS2 SPL to PS2 SPL PS Linac4 PAC 2009 Vancouver PS2 Design Optimization, M.Benedikt 30

  31. HP-SPL based proton driver: principle (1/2) SPL-based 5 GeV – 4 MW proton drivers have been designed [SPL + 2 fixed energy rings (accumulator & compressor)] which meet these requirements References: • SPL based proton driver/ R. Garoby, talk at NuFact06, http://nufact06.physics.uci.edu/Workshop/Slides/RGaroby_SPL3_Pdriver.ppt • Feasibility Study of Accumulator and Compressor for the 6-bunches SPL-based Proton Driver / M. Aiba, CERN-AB-2008-060 • A first analysis of 3-bunches and 1-bunch scenario for the SPL-based Proton Driver / M. Aiba, CERN-AB-Note-2008-048-BI • Beam Stability in the SPL Proton Driver Accumulator for a Neutrino Factory at CERN / E. Benedetto, http://nufact09.iit.edu/wg3/wg3_benedetto-splstability.ppt, to be published • SPL-based Proton Driver for a Neutrino Factory at CERN, M. Aiba, E. Benedetto, R. Garoby, M. Meddahi, poster nb.25 (this workshop) Specifications (from ISS report)

  32. HP-SPL based proton driver: principle (2/2) • Beam accumulation • Accumulator ring • Charge exchange injection • n x 100ms accumulation time • Isochronous (h=0): beam frozen longitudinally to preserve Dp/p • No RF (=> minimum impedance) • 1-6 bunches of ~120 ns length • Bunch compression • Compressor ring • Large RF voltage (large stored energy & minimum RF power) (=> bunch rotation on stored energy) • Large slippage factor h => rapid phase rotation in few x10ms, • ~2ns rms bunch length @ extraction to the target (=> moderate DQ because of dispersion) • Synchronization between rings - Ratio of circumferences guaranteeing correct positioning of successive bunches inside the compressor without energy change in any ring

  33. Generation of 6 bunches Accumulator [120 ns pulses - 60 ns gaps] SPL beam [42 bunches - 21 gaps] Compressor [120 ns bunch - V(h=3) = 4 MV] Target [2 ns bunches – 6 times]

  34. Bunch rotation beforeejection from M. Aiba

  35. Main parameters from M. Aiba

  36. Beam delivery on 4 targets & horns E. Bouquerel – IPHC, EUROnu meeting, March 27, 2012 side view >>KEY PARAMETER<< Angle of deflection (rad) Magnetic field (T) 2000mm T1 T2 Kinetic energy (GeV) 3D view Magnetic length (m) Principle: z T3 T4 • Use of 2 bipolar kickers (or bipolar pulsed magnets): ± 45˚ rotation wrt the z axis • K1 (K2) deflects to D1 and D3 (D2 and D4) • Need of 1 compensating dipole per beam line (1 angle for each target): • Apply a symmetry in the system

  37. Summary

  38. Technology (1/2) Presently, the HP-SPL R&D: • progresses at a good pace, leading to the high power test of a short 4 cavities cryomodule in 2014. • allowstesting the validity of new concepts thatshouldresult in significantsavings (RF couplers, SS He tanks, Cryomodule design…) • canpotentiallybeused in multiple projectsat CERN as well as outside (ESS, MYRRHA) and benefitsfromexternal support (ESS and EU programmes) • isa means for CERN to embedinside the network of labsinvolved in superconducting RF technology (CEA, IN2P3, DESY, JLAB, FNAL, ANL…) and re-establishin-house competencein thatfieldatthe state-of-the-art level • drives infrastructural upgrades (e.g. electro-polishingfacility, clean room, high power RF at 704 MHz…) whichwillbebeneficial for otherdevelopment (LHC main RF, Crabcavities, HIE IDOLDE…)

  39. Technology (2/2) Important future R&D subjects • HOM damper for beamstabilityat high current • Cavities in view of reaching the expected performance/simplifying fabrication/evaluating alternative solutions (Nb on Cu) • Cryomoduletowards a full size prototype • RF amplifiersfor reducingcost • Power supplyfor high power amplifier for reducingcost

  40. Accelerator design • The SPL acceleratordesign is«mature» and stable • In the context of the LAGUNA-LBNO: • The LP-SPL design willbeadapted to the requirements of the HP-PS • The HP-SPL design willbebrieflyrevisited and completedwith the design of the accumulation ring • Other applications mayrequireresuming/refiningaccelerator design: • e+/e- acceleration in the ERL of the Linac-Ring option of LHeC • LEP-3 • LP-SPL remains a back-up option for the LHC injectorcomplex…

  41. THANK YOU for your attention!

More Related