1 / 5

Proper Positioning for CXR

Proper Positioning for CXR. Chin in neutral position Shoulders squared, body aligned ETT out of field of CXR EKG wires, pacing wires, other tubes positioned to side of chest If possible, do not change degree of HOB Zflo may remain. What’s wrong with this??

feryal
Download Presentation

Proper Positioning for CXR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Proper Positioning for CXR Chin in neutral position Shoulders squared, body aligned ETT out of field of CXR EKG wires, pacing wires, other tubes positioned to side of chest If possible, do not change degree of HOB Zflo may remain

  2. What’s wrong with this?? • ETT in CXR field (creates “shadow”) • Wires and tubes across chest • Neck is flexed • Neck in extended position causes the ETT to be too low on film • Neck in flexed position causes the ETT to appear high on film

  3. Proper positioning creates the best possible film to reduce frequent ETT repositioning and multiple exposures as well as potential loss of airway. • Large Patient?? Get extra hands for lifting and holding airway. It is okay to shoot through the draw sheet. • It is not necessary to remove the Zflo on a smaller patient; flatten and put the Xray board on top • The providers would like the film shot in the HOB position in which the patient is usually positioned. • The bedside RN is responsible for ensuring the airway is stable throughout the Xray process. • Sedation might be required to keep your patient comfortable and in proper position. • You may need to wear the Xray shield and hold the patient in proper position.

  4. PCCU Re-taping Checklist • There should be a conversation with Provider prior to re-taping any ETT • Does he/she wish to be present at the bedside • Does the patient have a “difficult airway”? (provider should be present) • What medications will be used to sedate and paralyze? Routine sedation/paralytic will be the standard for re-taping ETT in PCCU (if extubation is planned, extubate now instead of re-taping) • Are there copious secretions or other issues requiring assistance?

  5. PCCU Re-taping Checklist (cont.) • Ensure that RT or provider increases RR on ventilator while paralytic in effect (and returns to decrease rate once pt. initiates spontaneous breaths) • Is there a bag/mask/suction at the bedside? • Suction mouth and hypopharynx prior to deflating cuff • Ensure cuff is deflated if ETT is to be repositioned • Use closed loop communication between RT and RN before final tape removed and throughout process: • “Are you ready to hold the ETT?” • “Yes, I have the ETT” • Holder should say STOP if he/she feels that the ETT is slipping

More Related