1 / 15

Children’s Safety

Children’s Safety. S afety Requirements for Baby’s and Children’s Wear. ** Blue Island (BD) Ltd requirements and restrictions and suppliers responsibility ** Needles and sharp objects ** Decorations and small parts ** Drawstrings and cords ** Buttons ** Zippers.

franklin-prince
Download Presentation

Children’s Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Children’s Safety

  2. Safety RequirementsforBaby’sandChildren’sWear **Blue Island (BD) Ltd requirements and restrictions and suppliers responsibility **Needles and sharp objects **Decorations and small parts **Drawstrings and cords **Buttons **Zippers

  3. Blue Island (BD) Ltd requirements and restrictions and suppliers responsibility **Needle detector, Safe Q machine, testing methods…

  4. Needles and sharp objects **Althoughhas implemented strict routines to be followed, below sharp objects has been found in all supply products… **…Some of our youngest customers has been seriously wounded!

  5. Decorations and small parts **Bows and other decorations…. * Must be firmly stitched, not only glued. * Must not have sharp edges. * Must always be attached with woven reinforcement on the back of the fabric. * Must be adequately finished to secure the ends, a knot is not allowed.

  6. Decorations and small parts **Sequins, beads and pearls and glued on decoration… * Can not be tested in 90/50N pull force. * Must be checked for sharp edges and point’s. * Need to be washed tested 5 times to ensure that decorations are intact after wash.

  7. Decorations and small parts **Motives and labels… * Must be firmly stitches, not only glued. * Must withstand 90 N pull force if fitting entirely testing cylinder and is not stitched all way around. * Must not break or have sharp edges. *Flags labels that are made of flat woven tape with no sharp edges or labels that are stitched all way around does not have to be tested in 90N.

  8. Drawstring and cords **Hoods on outerwear must be detachable. **Ends of drawstring must be secured. Ok Not ok

  9. Drawstring and cords **Toggles or other embellishment shall only be used of drawstring with no free ends. **When using a loop drawstring the overlapping of the endings must be at least 3 cm. **Belt loops shall be designed to lie flat against the garment with maximum length of 7,5 cm(as per Buyer standard).

  10. Buttons **All sewn on buttons… * Must be securely fastened with lock stitch. * Must withstand the 90N pull force for 10 seconds if the button dimension is greater than 6mm. * Withstand the 50N pull force for 10 seconds if the button dimension is less or equal to 6mm. * Must not break or have sharp edges. * Shall have 2-hole button rather than 4-hole button (as per Buyer standard) .

  11. Buttons **Press- and Jeans buttons, rivets and eyelets… * Must withstand the 90N pull force for 10 seconds if the button dimension is greater than 6mm. * Must withstand the 50N pull force for 10 seconds if the button dimension is less or equal to 6mm. * Must not break or have sharp points and edges. * Upper and lower parts must have a perfect matching when closed.

  12. Zippers **All zippers must meet the Buyer’s requirements. *All parts of the zipper must not break or have sharp edges. *All garments with a metal zipper must have a zipper guard facing the body to prevent injury. *Styles with a zip fly must have a zipper guard firmly secured at the bottom. This is valid for all types of zippers in metal, plastic and nylon. Zipper guard

  13. Puller attachments **Puller attachments with play value that are shaped, filled or made of any other material than a plain woven tape must also fulfill the “resistance to twist of pull and slider”. **Pullers with play value:

  14. Puller attachments **Pullers with no play value must withstand 90N pull test but no need to test “resistance to twist of pull and slider”. **Ensure a zipper does have a “fold over”. Stitched together. Max. total length 7,5 cm Not ok Fold over

  15. Thank you for ensuring my safety!

More Related