1 / 30

Logic Analyzers

Logic Analyzers. EECS150 Spring 2006 – Lab Lecture #5 David Lin Greg Gibeling. Today. Lab #3 Solution Synplify Warnings Debugging Hardware Administrative Info Logic Analyzer ChipScope ChipScope Demo – Not on webcast!. Lab #3 Solution (1). Simple Solution

gregoryw
Download Presentation

Logic Analyzers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Logic Analyzers EECS150 Spring 2006 – Lab Lecture #5 David Lin Greg Gibeling EECS150 Lab Lecture #5

  2. Today • Lab #3 Solution • Synplify Warnings • Debugging Hardware • Administrative Info • Logic Analyzer • ChipScope • ChipScope Demo – Not on webcast! EECS150 Lab Lecture #5

  3. Lab #3 Solution (1) • Simple Solution • Use the standard 2 (or 3) block FSM format • Always @ (posedge Clock) block that instantiates the register that contains state. • Combinational logic block that responds to inputs and state changes by updating nextState wire and outputs. • Optionally, block that updates outputs. EECS150 Lab Lecture #5

  4. Lab #3 Solution (2) • Cleaning Up Your Verilog FSM Code • always @ (ps) begin • case (ps) • STATE_Init: begin • Open = 1’b0; • Prog1 = 1’b0; • Prog2 = 1’b0; • Error = 1’b0; • if (Decode1 & Enter) • ns = STATE_Ok1; • else if (~Decode1 & Enter) • ns = STATE_Bad1; • end • ... • STATE_Ok2: begin • Open = 1’b1; • Prog1 = 1’b0; • Prog2 = 1’b0; • Error = 1’b0; • ... EECS150 Lab Lecture #5

  5. Lab #3 Solution (3) • always @ (ps) begin • Open = 1’b0; • Prog1 = 1’b0; • Prog2 = 1’b0; • Error = 1’b0; • case (ps) • STATE_Init: begin • if (Decode1 & Enter) • ns = STATE_Ok1; • else if (~Decode1 & Enter) • ns = STATE_Bad1; • end • ... • STATE_Ok2: begin • Open = 1’b1; • ... • How about using assign statements for outputs? EECS150 Lab Lecture #5

  6. Synplify Warnings (1) • Why Bother? • “@W” in the Synthesis Report (Errors are “@E”) • Part of your project grade • Major warnings will cost points • Knowing these will make your life easier • Saves debugging • Always run synthesis before simulating in ModelSim! Incomplete Sensitivity List • ModelSim will use the sensitivity list • Synplify pretty ignores it EECS150 Lab Lecture #5

  7. Synplify Warnings (2) input Clock; reg [31:0] Count; // Counter always @ (posedge Clock) Count <= Count + 1; OK! input [15:0] A, B; output [31:0] Sum; output COut; // Adder always @ (A) {COut, Sum} = A + B; input [15:0] A, B; output [31:0] Sum; output COut; // Adder always @ (A or B) {COut, Sum} = A + B; Incomplete Sensitivity OK! EECS150 Lab Lecture #5

  8. Synplify Warnings (3) • Latch Generated input [1:0] select; input A, B, C; output Out; reg Out; // Mux always @ (select or A or B or C) begin case (select) 2’b00: Out = A; 2’b01: Out = B; 2’b10: Out = C; endcase end input [1:0] select; input A, B, C; output Out; reg Out; // Mux always @ (select or A or B or C) begin case (select) 2’b00: Out = A; 2’b01: Out = B; 2’b10: Out = C; default: Out = 1’bx; endcase end EECS150 Lab Lecture #5

  9. Synplify Warnings (4) • Combinational Loop • Must remove the loop or add a register • Multiple assignments to wire/reg • Nothing should be assigned to in more than one place! 0 1 0 1 2 3 ∞?? ∞?? 0 1 2 EECS150 Lab Lecture #5

  10. Synplify Warnings (5) • FPGA_TOP2 always has warnings • Un-driven Input • Unconnected Output • These are truly unneeded pins • Things like the audio chips… • Your modules should not have warnings EECS150 Lab Lecture #5

  11. Synplify Warnings (6) • Why bother? • Getting rid of warnings saves debugging • Synplify warnings will result in lost points • Warnings are the only syntax check • Verilog is a forgiving language • Undeclared variables default to 1 bit wires • This isn’t a good thing EECS150 Lab Lecture #5

  12. Debugging Hardware (1) • Debugging Algorithm • Hypothesis: What’s broken? • Control: Give it controlled test inputs • Expected Output: What SHOULD it do? • Observe: Did it work right? • If it broke: THAT’S GREAT! • If we can’t break anything like this then the project must be working… EECS150 Lab Lecture #5

  13. Debugging Hardware (2) • Using the logic analyzer / ChipScope • The most reliable tool you have • When used properly • Use the triggers effectively • Trigger on recurring sequences • Trigger on errors • An unstable display is useless • Compare synthesis to simulation • ChipScope is almost as good as simulation EECS150 Lab Lecture #5

  14. Debugging Hardware (3) • Before you change anything • Understand exactly what the problem is • Find an efficient solution • Evaluate alternative solutions • After the change • Fixes may make things worse sometimes • May uncover a second bug • May be an incorrect fix • Repeat the debugging process EECS150 Lab Lecture #5

  15. Administrative Info (1) • Lab/Project Partners • If you don’t have a partner, stay after lab lecture and we’ll help you get partnered up. • Remote access to Xilinx tools • Use Remote Desktop Connection to access kramnik.eecs.berkeley.edu. • A link to the kramnik set-up guide is on the documents page. • Also useful for transferring files to and from your U:\ drive. EECS150 Lab Lecture #5

  16. Administrative Info (2) • The grade book is online. Use your web account to access it. • We will update the grade book roughly once a week. • Hours spent on labs/checkpoints will not affect your grade. • U:\ is only for storage. • 100 MB limit. • Don’t synthesize on it! • Use “Project”  “Cleanup Project Files” before copying to U:\ EECS150 Lab Lecture #5

  17. Administrative Info (3) • Pick up graded assignments from cabinet at the back of room. • Midterm 1 graded, except for #5 • Mean ~71/80 so far. • If you have #5 grade, then you’re done. If not, it’ll be up soon. • There are still problems with computers in ½ the room. We’ll post to web site when it’s fixed. EECS150 Lab Lecture #5

  18. Lab #6: Logic Analysis (1) • Exhaustive FSM Testing • Very similar to Part3 of Lab #4 • You’ll be mapping the whole FSM • No bubble-and-arc to start from • No single step • Takes an input every cycle at 27MHz • Much too fast to see on the LEDs • Logic Analyzer! EECS150 Lab Lecture #5

  19. Lab #6: Logic Analysis (2) • Logic Analyzer • HP54645D Mixed Signal Oscilloscope • Analog Oscilloscope • Digital Logic Analyzer • Graphs Signals vs. Time • Like a timing diagram • Invaluable for Debugging • This is your only tool for examining your clocks • Easy to see trends in signals… EECS150 Lab Lecture #5

  20. Lab #6: Logic Analysis (3) EECS150 Lab Lecture #5

  21. Lab #6: Logic Analysis (4) • Procedure • Set up the Logic Analyzer • Synthesize the design • Write a test pattern and set SW10 • Press Single on the logic analyzer • Press Reset to start the test • Examine the waveforms • Build a bubble-and-arc diagram EECS150 Lab Lecture #5

  22. The Logic Analyzer (1) • Graphs Voltage vs Time • Takes real signals from a CUT • Can show both analog and digital signals • Great for signal quality, delay, timing EECS150 Lab Lecture #5

  23. Trigger Controls Digital Controls The Logic Analyzer (2) • 16 Digital Inputs • Excellent Debugging Tool • Not very many input signals EECS150 Lab Lecture #5

  24. The Logic Analyzer (3) • Read the Lab. • This is just a quick 10min demo. EECS150 Lab Lecture #5

  25. ChipScope (1) • Software based logic analyzer • Get results on the computer • Put a logic analyzer right into the FPGA • ICON – Connects FPGA to software • ILA – Does the actual analysis • More flexible than the bench analyzers • Can create busses • Advanced triggering support EECS150 Lab Lecture #5

  26. ChipScope (2) • Steps to use ChipScope • Generate an ICON • Generate an ILA • Connect the ILA to the ICON • Synthesize, and implement your design • With the ILA and ICON • Program the CaLinx board • Run the ChipScope Pro Analyzer • Runs over the JTAG, not Slave Serial connection! EECS150 Lab Lecture #5

  27. ChipScope (3) • Logic Analyzer Similarities/Differences • Triggering is similar • Can be set to show waves before trigger • Can trigger on repeated or combined events • Data/Trigger can be MUCH bigger • Up to 256bits wide • As many samples as Block RAM on the FPGA • Data is captured synchronously • Can’t look at clocks • Much easier to view waveforms EECS150 Lab Lecture #5

  28. ChipScope (4) • ChipScope is useful to verify • In this lab we’re using it just to make absolutely sure • You will NEED ChipScope • You cannot debug a large design (i.e. your project) without it • Bench analyzers won’t show enough signals • It helps to master use of HP Logic Analyzer and ChipScope early on. • You want to have ready knowledge of both tools for when you’re working on the project. EECS150 Lab Lecture #5

  29. ChipScope (4) • Detailed ChipScope Tutorial • http://inst.eecs.berkeley.edu/~cs150/sp06/Documents.php#Tutorials • Get used to reading technical documents and tutorials. • It’s a useful and necessary job skill for engineers. EECS150 Lab Lecture #5

  30. ChipScope Demo • Aren’t you glad you decided not to webcast today? EECS150 Lab Lecture #5

More Related