50 likes | 279 Views
Multiple SSID With Multiple VLANs configuration example on Cisco Aironet APs. By Surendra B.G TAC Engineer, Cisco Systems. Config Check points. Assumption:- I assume that you have configured the DHCP pool on the IOS switch or the Router or on the dedicated DHCP server.
E N D
Multiple SSID With Multiple VLANs configuration example on Cisco AironetAPs By Surendra B.GTAC Engineer, Cisco Systems.
Config Check points • Assumption:- I assume that you have configured the DHCP pool on the IOS switch or the Router or on the dedicated DHCP server. • Design:- • Assuming we have 2 VLANs(51 and 52 ) with native as 10 and mapping to 2 different SSIDs (one and two) on any Aironet Access Points. • SSID ONE uses WEP encryption • SSID TWO uses WPA-PSK • Assuming the AP Ethernet port is connected to Gig 0/7 port of the switch. • Broadcasting both the SSIDs.
Check Points Step 1>> Configure the SSID and Map it to respective VLANS.. Step 2 >> Assigning the Encryption to different SSIDs with respective VLANs. Step 3 >> Configuring the sub interface for Dot11 radio 0/1 and Ethernet. Step 4>> Verification.
Check Point • Switchportconfiguration interface GigabitEthernet0/7 description 1141 AP IOS switchport trunk encapsulation dot1q switchport trunk native vlan 10 switchport mode trunk end
END!!! I really appreciate your feedback Regards Surendra