1 / 7

INSULATION TESTER CALIBRATION Using the 3200 Electrical Test Calibrator

INSULATION TESTER CALIBRATION Using the 3200 Electrical Test Calibrator. INSULATION TESTER CALIBRATION Overview. The 3200 has five functions for calibrating insulation testers : High value resistance output for insulation testing (0 MOhms to 2,000MOhms)

hallam
Download Presentation

INSULATION TESTER CALIBRATION Using the 3200 Electrical Test Calibrator

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. INSULATION TESTER CALIBRATIONUsing the 3200 Electrical Test Calibrator

  2. INSULATION TESTER CALIBRATIONOverview • The 3200 has five functions for calibrating insulation testers : • High value resistance output for insulation testing • (0 MOhms to 2,000MOhms) • 2. Measurement of the insulation test voltage • 3. Low value resistance for continuity testing • (0.1 Ohm to 20.0 Ohms Variable, 100 Ohms & 1kOhm Fixed Ranges) • 4. Insulation test current measurement • 5. A.C. voltage output at 100V, 200V, 240V, 300V and 400V Dedicated inputs and test buttons for Insulation Testers provides safe, convenient connection & operation

  3. INSULATION TESTER CALIBRATIONContinuity Resistance • CONNECT TESTER TO INSULATION TESTER TERMINALS • SET CONTINUITY RANGE ON TESTER • SET CONTINUITY RESISTANCE ON • 3200, EG. 1 OHM • MEASURE RESISTANCE USING TESTER

  4. INSULATION TESTER CALIBRATIONContinuity Current • CONNECT TESTER TO INSULATION TESTER TERMINALS • SET CONTINUITY RANGE ON TESTER • MEASURE CONTINUITY CURRENT FROM TESTER • NOTE : 1 OHM RANGE MUST BE SET ON 3200 TO ENABLE • CURRENT MEASUREMENT CURRENT MEASUREMENT MODE ENABLED BY USING 1 OHM CONTINUITY RANGE

  5. INSULATION TESTER CALIBRATIONInsulation Resistance • CONNECT TESTER TO INSULATION TESTER TERMINALS • SET INSULATION RANGE ON TESTER • SET INSULATION RESISTANCE ON 3200, EG. 10 MOHM • MEASURE RESISTANCE USING TESTER

  6. INSULATION TESTER CALIBRATIONInsulation Test Voltage • CONNECT TESTER TO INSULATION TESTER TERMINALS • SET INSULATION TEST VOLTAGE RANGE ON TESTER • MEASURE INSULATION TEST VOLTAGE & CURRENT FROM TESTER • BY SELECTING THE VOLTAGE MEASUREMENT FUNCTION USING • THE SOFT KEY (SHOWN BELOW) VOLTAGE / CURRENT MEASUREMENT ENABLED BY USING THE SOFT KEY

More Related